Process Engineering and Natural Materials Technology (B. Sc.) (In German)
4.3 /5
- Public University
School of Engineering Sciences
Talk to ExpertProcess Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Overview
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
Dresden University of Technology offers Process Engineering and Natural Materials Technology (B. Sc.) (In German) at UG level. Available for Indian students, this course can be completed in 3 years. To be eligible, Indian students should have required scores in exams such as IELTS. Also, they have to submit all the mandatory documents as part of the admission process. For an Indian student the budget to study at Dresden University of Technology should include tuition and cost of living. The cost of living covers accommodation, food, travel, books, supplies and other expenses.
Duration | 3 years |
Tuition & Fees | |
International Students Admission Website | Go to Website  |
Course Level | UG Degree |
Mode of Course | Full Time |
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
Table of contents
Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Fees
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
The fee breakup of the Dresden University of Technology Process Engineering and Natural Materials Technology (B. Sc.) (In German) includes the first-year tuition fee and cost of living. The cost of living will include expenses like rent for accommodation, meals, and other utilities. Students must note that the total expenses are subject to vary, depending on the additional charges set by the Dresden University of Technology. Students can check the table given below to know more about Dresden University of Technology Process Engineering and Natural Materials Technology (B. Sc.) (In German) fee breakup.
1st year tuition fees | Fees components | Amount (for 1 year) |
|---|---|
| Tuition & fees | INR 0 |
Calculated at the exchange rate of 1 Euro = INR 102.37 | Tuition & expenses were last updated on 15ᵗʰ October 2024Download exam sample paper
IELTS
IELTS
PTE
Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Entry Requirements
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
Requirements for 12th grade
- No specific cutoff mentioned
- Minimum Requirements :
- Applicants must have passed high school.
- Minimum Requirements :
Convert your Percentage to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
%
PTE
- No specific cutoff mentioned
IELTS
- No specific cutoff mentioned
- Get a Full FREE IELTS Prep Course with Shiksha Study Abroad – Limited Seats for Weekend & Weekday Batches! Register now for IELTS
Sign-up to view details
Convert your Percentage to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
%
Conditional Offer
- Not mentioned
Sign-up to view details
Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Rankings
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
University Ranking
| Rank | Rank Publisher |
|---|---|
| #93 | |
| #160 | |
| #201 |
Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Placements
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
| Particulars | Statistics (2021) |
|---|---|
| Internship Available | Yes |
Dresden University of TechnologyStudents Ratings & Reviews
4.3/5
7 Verified ReviewsStudent Views (Based on Reviews)
- 43% students never faced discrimination in this university
Vibe of Campus
Academically oriented
Friendly
Multi-dimensional
Liberal
Internships4
Part time work4
Post study jobs4.1
Quality of faculty4.3
Student Life4.4
Value for money5
Public transportation5
Safety4.7
Indian Food3.4
Permanent Immigration4.1
A
Anonymous
Master's in Nanoelectronic Systems - Batch of 2026
Offered by Dresden University of Technology
4.5
Dresden is a hub for the semiconductor industry.
Tips: It is a great opportunity to connect with international students and the research oriented faculty. There are many opportunities to grow at the university in whichever direction you want to go. The curriculum is revised every year to include new courses that are beneficial for students in the long term. Students without prior industrial experience can also gain experience through working student roles at the university and research institutes. Students who secure a good GPA of 9 and above (Indian grading system) can apply for scholarships. I am very satisfied with my university and the opportunities it provided me to learn, explore and grow. The course is quite good and you have access to industrial tools to get good exposure during the masters programme. This helps you in getting internships and other rules while studying. Germany is quite welcoming and I am happy to be here.
Likes (Post study jobs): The university is located in Saxony state in Germany. There are a lot of opportunities in the semiconductor domain as there are multiple startups, university spinoffs and MNCs. Dresden is a hub for the semiconductor industry as it plays a pivotal role being part of Silicon Saxony. Analogue and digital design, verification, research and semiconductor technology related jobs are available once you complete the masters programme in Nanoelectronic systems. Salary packages vary from company to company, roughly between 50,000 - 75,000 per annum. Salary is negotiable based on your skill set and experience in the domain in which you will be working.
Dislikes (Indian Food): I prefer cooking food myself as there are less options in finding Indian cuisine. It is quite expensive to have food from restaurants while you are in student. There are restaurants providing Italian, Mexican, Greek, Indian, Asian and other European cuisines. Rates vary from restaurant to restaurant, depending on the dish you order. A dish can cost you anywhere between 5-30 roughly.
Total Monthly ExpenseEuro 750
Prepping time for classes10 hours/Week
Expected Annual SalaryEuro 58000
D
Diksha Avhad
Master's in Nanoelectronic Systems - Batch of 2025
Offered by Dresden University of Technology
4.2
Amazing university for Nanoelectronics students.
Tips: There are multiple scholarships and programs available for building a network which helps a lot to find part time job and even full time job. Networking plays a major role. The course is easy if you regularly study and do not study just during exams, like an Indian college's approach.
Likes (Value for money): It's a public university, therefore there is no tuition fee and the fee we pay during the semester is for a semester ticket, which is used for public transport all over Germany. You dont have to pay any exam fee or utilities fees so basically the education you acquire is completely free of charge.
Dislikes (Indian Food): Indian restaurants are very few and among them, only 1 or 2 are worth the money therefore I prefer to try different cuisines outside such as Italian, Mexican, etc or else prefer to cook all by myself an Indian food, which makes it worth the taste.
Total Monthly ExpenseEuro 700
Prepping time for classes35 hours/Week
Expected Annual SalaryEuro 7000
A
Anonymous
Master of Science in Computational Modeling and Simulation - Batch of 2027
Offered by Dresden University of Technology
3.6
Stressful and highly demanding coursework.
Tips: If you really feel you can opt for research-oriented programs, please go for it. This program demands high prerequisite knowledge. I did apply for a scholarship, and for that, you need a couple of prerequisites. Do not come in the mindset that you can finish your master’s in 2 years. It’s a myth. The trams and bus connections are very well connected and organised. From my dorm, I need to go 45 minutes to my university. The tram connections are usually great. You get buses and trams immediately, and the wait time is comparatively low. This is especially true on weekdays, but weekend service is much less reliable.
Dislikes (Indian Food): I prefer cooking by myself as I am able to cut down a lot of living expenses through that. The restaurants around my locality start from 10 euros minimum per meal, which is basically my half-week or a week's worth of grocery money. Try to save up as much money as possible, but don't be frugal in food.
Total Monthly ExpenseEuro 650
Prepping time for classes40 hours/Week
Expected Annual SalaryEuro 40000
Pranav Keshavan
MSc in Hydro Science and Engineering - Batch of 2024
Offered by Dresden University of Technology
4.8
Multi-dimensional, good networking opportunity and great research opportunity.
Tips: For the ones who have lived all their life in India, cultural shift will definitely be there. But it is also based on how much open one is to the experience and well as flexible to trying new things and adjusting to it, while also remaining their core values. The first semester goes on very quickly, so people need to stick to their routine and not get carried away by the external things too much. Enjoyment is good, but if the goal is for a good education and a job afterwards, then it needs to be focused. There are several scholarships like DAAD, Erasmus Mundus. They usually pay for everything, although it is competitive. There are some partial scholarship as well which can be availed once someone gets enrolled to support their traineeship/internship, semester abroad, supporting master's thesis, buying laptops etc. The course is very multi dimensional so if you need to get specified knowledge in one field, you need to pick your electives wisely and opt for a semester abroad, if possible.
Likes (Public transportation): The entire city is well connected with public transport. Plus now, the deutschland ticket provides access to all local and regional trains (except high-speed ones), buses, tram, ferries, ropeways etc. throughout Germany. As a student, the amount is within the semester contribution, so one does not have to pay anything extra, after that it's about 60 euros/month.
Dislikes (Part time work): I rated 4 because part time jobs are available, but most of them require at least basic German language skills, specially the ones involving customer interaction. A part time job of 10 -20 hours/week is quite manageable, if one plans their schedule well and follows a structured timetable. There are several options of finding part-time work: TU Dresden job portals like STAV, and external job agencies like Nexgenjobs, eBay Klienenzeigen etc.
Total Monthly ExpenseEuro 1000
Prepping time for classes15 hours/Week
Expected Annual SalaryEuro 55000
A
Anonymous
Master's in Distributed Systems Engineering - Batch of 2026
Offered by Dresden University of Technology
4.3
One of the top 9 technical universities in Germany.
Tips: The city is good for international students and has Indian communities too for support. There are many incoming international students; thus, it's a friendly and student-loving city. The cost of living is average and manageable for students with the salary they get.
Likes (Value for money): There is no tuition fee at TU Dresden, as it is a public university. Also, it is one of the top 9 technical universities in Germany, making it the best university for international students. There are many English courses available, with great support from the university.
Dislikes (Post study jobs): The market is a little tough to crack at this moment. The job postings do have a lot of jobs, but they are primarily jobs in the electronics industry. For some roles, you might be able to negotiate an internship that could eventually be a full-time job, or you might be able to find a student job and later negotiate a full-time position with that company. Additionally, if you can manage to learn some German, it would give you a leg up on the competition.
Total Monthly ExpenseEuro 600
Prepping time for classes11 hours/Week
Expected Annual SalaryEuro
View All 7 Reviews
Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Highlights
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
- Process Engineering and Natural Materials Technology (B. Sc.) (In German) is offered by School of Engineering Sciences under Dresden University of Technology, Germany.
This a Bachelors level program of a course duration of 3 Years.
Download the brochure to read more details of this course.
Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Scholarships
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
Scholarship information is not available. You can apply to non-college specific scholarships available for
Germany.
View all 35 scholarships
Resources for you
Learn the process in simple steps with these guides handpicked for you
Explore courses offered by TU Dresden
Select the Degree you are Interested in
Other Courses offered by TU Dresden
About the author
Anushree is a Graduate in Bachelor's degree in Journalism and Mass Communication and takes keen interest in content creation. She has affinity for writing and travelling around the world takes the top spot on her bucket list. Bringing out the creativ...Read Full Bio
Study in GermanyUniversities in GermanyUniversities in DresdenTU DresdenProcess Engineering and Natural Materials Technology (B. Sc.) (In German)Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Popular & recent articles
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden
View more articles
Process Engineering and Natural Materials Technology (B. Sc.) (In German) at TU Dresden Contact Information
Process Engineering and Natural Materials Technology (B. Sc.) (In German)
at TU Dresden