MSc Polymer Technology
4.1 /5
- Public Institute
School of Engineering Sciences
Talk to ExpertMSc Polymer Technology at KTH Sweden Overview
MSc Polymer Technology
at KTH Sweden
KTH Royal Institute of Technology is one of the finest universities in Sweden. KTH Royal Institute of Technology provides MSc Polymer Technology at PG level. The duration of this course is 2 years. This course attracts students from all over the world.
To enrol in this course, international students must fulfil all the admission requirements. The admission requirement at the KTH Royal Institute of Technology include standardized tests like IELTS, TOEFL and PTE.
The first year tuition fees KTH Royal Institute of Technology for MSc Polymer Technology is SEK 171,000. Moreover, the students must be ready for other expenses such as rent, hostel fees, food, books, supplies, utilities, etc.
Duration | 2 years |
Tuition & Fees | ₹16.30 Lakh Get Fees details |
International Students Admission Website | Go to Website  |
Official Career Service Website | Go to Website |
Course Level | PG Degree |
MSc Polymer Technology
Table of content
- Overview
- Fees
- Entry Requirements
- Application Process
- Rankings
- Highlights
- Scholarships
MSc Polymer Technology at KTH Sweden Fees
MSc Polymer Technology
at KTH Sweden
The total cost of KTH Royal Institute of Technology MSc Polymer Technology is inclusive of the first-year tuition fees and living cost. The first-year tuition fees of MSc Polymer Technology is SEK 171,000. It is to be noted that the total cost to study this course may vary as per the additional expenses applied by the university and as per the students’ lifestyle.
Given below is the table that lays out the KTH Royal Institute of Technology MSc Polymer Technology fee breakup:
1st year tuition fees | Fees components | Amount (for 1 year) |
|---|---|
| Tuition & fees | INR 16,29,630 |
Calculated at the exchange rate of 1 SEK = INR 9.53 | Tuition & expenses were last updated on 18ᵗʰ October 2024Download exam sample paper
IELTS
IELTS
TOEFL
PTE
MSc Polymer Technology at KTH Sweden Entry Requirements
MSc Polymer Technology
at KTH Sweden
Requirements for 12th grade
- No specific cutoff mentioned
Graduation
- No specific cutoff mentioned
- Read less
- A bachelor's degree or comparable qualification equivalent to a Swedish bachelor's degree from an internationally recognised university is required
-
A bachelor's degree, corresponding to at least 180 ECTS credits, in chemistry or a closely related subject including courses in:
- Chemistry or a closely related subject corresponding to at least 50 ECTS credits
- Mathematics, numerical analysis and computer science corresponding to at least 20 ECTS credits
Convert your CGPA to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 10
TOEFL
- Marks - 92/120
- written section grade 22Register for TOEFL iBT® Test Today and get Rs 500 Off. Use code SHIKTOEFL to avail the discount. Hurry Register now for TOEFL
Sign-up to view details
Convert your CGPA to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 10
PTE
- Marks - 62/90
- writing 61
IELTS
- Marks - 6.5/9
- with no section lower than 5.5
- Get a Full FREE IELTS Prep Course with Shiksha Study Abroad – Limited Seats for Weekend & Weekday Batches! Register now for IELTS
Sign-up to view details
MSc Polymer Technology at KTH Sweden Application Process
MSc Polymer Technology
at KTH Sweden
Step one
Prepare documents for application
CV
- CV
- KTH does not require a standard template, but the CV should clearly and concisely outline your education, work experience, computer literacy, qualifications and achievements (awards, publications, expertise knowledge and skills, etc.). It must be written in English
Step two
Additional documents required
- Certificates and diplomas of your completed degree(s)
- Transcript of completed courses and grades included in your degree
- Transcript of completed courses and grades included in your degree must be officially issued as per the certificates and diplomas. If you have had courses credited and/or transferred from previous studies, you must also submit official transcripts for those
- Proof of English proficiency
- Identification
- A copy of passport with personal data and photograph, or other identification document
- Summary Sheet
- Relevant work experience, if any
- The letter of motivation explains why you have chosen this programme at KTH, what you hope to gain from it and how your interests and skills will help you succeed in your studies. Include an autobiography with the development and relevance of your academic and professional pursuits, extra-curricular activities and related experiences. KTH does not require a standard template, but it must be in English and less than 500 words
Step three
Start your online application
Step four
Application fees for this course
SEK 900 = INR 8.58 Thousand
Mode of payment: Credit card, Wire money transfer
Step five
Application deadline
Fall (Aug): 15th Jan
*The dates specified are tentative dates as per the previous year records. Our expert counselors can help with exact deadline date. Connect with the expert now!
MSc Polymer Technology at KTH Sweden Rankings
MSc Polymer Technology
at KTH Sweden
Course Ranking
University Ranking
| Rank | Rank Publisher |
|---|---|
| #25 | |
| #37 | |
| #43 |
KTH Royal Institute of TechnologyStudents Ratings & Reviews
4.1/5
3 Verified ReviewsVibe of Campus
- Multi-dimensional
- Academically oriented
- Friendly
- Stressful
Student Views
- 50% students never faced discrimination in this university
Internships4
Part time work3.7
Post study jobs3.7
Quality of faculty4.7
Student Life4.7
Value for money4.7
Public transportation5
Safety4.3
Indian Food2.7
Permanent Immigration3.7
A
Anonymous
Master of Science in Production Engineering and Management - Batch of 2026
Offered by KTH Royal Institute of Technology
4.2
Technicalities, invention and innovation.
Tips: Before planning to join this university you should have better grades in your Bachelors as getting into KTH is not as easy as it is one of the top technical universities in the world. We have to change ourselves after our arrival here especially in terms of food, culture and lifestyle. Getting a scholarship is a stuffed thing here. If any incidents happen inside the campus they will be covered by the insurance provided by the university. If anything happens outside then you should be covered with insurance before your arrival. Transportation is available for 24 hours so you can travel even during nights without any hesitation as the cameras are installed in the vehicles. Overall, I'm completely satisfied with my choice of choosing KTH as my destination for my master's.
Dislikes (Indian Food): Even though many Indian restaurants are available they are too costly when compared to Swedish restaurants. You should learn a few things to cook as it will be fun and make you feel at home at least as I say. A lot of stores are available so, there won't be a problem with spices, snacks, and other groceries.
Reviewed on 18 Mar 2025Read more
A
Anonymous
MSc Smart Electrical Networks and Systems (EIT InnoEnergy) - Batch of 2022
Offered by KTH Royal Institute of Technology
4.2
The best university for electrical engineering and amazing professors with industry knowledge.
Tips: Before joining this college, students should be well-prepared in the basics and familiar with tools like Matlab. They should also be good at Python, as they will be required to complete assignments using Python and Matlab. In addition, students should be proficient in data analytics and presentation, as well as have good report-writing skills. The professors at this university were world-class and had written many books. The coursework was challenging and required a lot of critical thinking. The PhD program had a lot of high-quality output. Sometimes you could work on projects with PhD students. Overall, I am quite satisfied with the course, university and the country.
Dislikes (Indian Food): There is only one canteen on campus, and it is located in the library. It offers a limited selection of food. There is a Taiwanese restaurant across the street from the university, but it is expensive. Fortunately, you can cook your own meals in the kitchen in your room and pack a lunch.
Reviewed on 11 Dec 2024Read more
T
Tanima Sharma
MSc Renewable Energy (EIT InnoEnergy) - Batch of 2022
Offered by KTH Royal Institute of Technology
3.9
Sustainability and Innovation are at the core of KTH Royal Institute.
Tips: It's a beautiful city, the English language is spoken here in contrast to other European countries. There is more system based approach to teaching rather than pure science. Very accommodating for international students, a great platform for meeting people and pushing innovations. However, weather, the cold, and short/ long days can be very difficult to adjust to initially.
Reviewed on 20 Jan 2023Read more
A
Anonymous
MSc Smart Electrical Networks and Systems (EIT InnoEnergy) - Batch of 2022
Offered by KTH Royal Institute of Technology
3.9
Marvelous research based university.
Tips: Students should know that the knowledge level transition is very significant. There are no scholarships. Overall, I am very much satisfied with the university course but the director's reach is very slow and sometimes not guiding well and it is very casual especially since the MSc SENSE course planning was not that good but the courses are very good with the professor's knowledge.
Likes (Safety): I felt safe on campus because everything was well organized, and there was support from student organizations. Sweden is a good country that is well-developed. However, the university did not provide any dedicated safety guides, assuming that students could handle themselves.
Dislikes (Internships): Sometimes it is very difficult to find internships and no guidance is given for the internships. There are no webinars regarding the internships. We need to search for internships. Sometimes professors can be impressed and can get the opportunity.
Reviewed on 3 Sep 2024Read more
View All 4 Reviews
MSc Polymer Technology at KTH Sweden Highlights
MSc Polymer Technology
at KTH Sweden
- The joint Nordic Five Tech master's programme in Polymer Technology equips students with comprehensive tools needed to develop future materials in, for example, advanced health care, energy production, green packaging, bio-based composites and surface coatings
- Students study at two Nordic universities and graduate with two degrees. The programme takes full advantage of both universities' strengths and research specialisations
- The programme provides a solid base in the chemistry and physics of organic materials and their connection to real-life applications. A broad range of courses and the choice of one of two specialisation tracks (Macromolecular materials, Polymer engineering) allow students to customise their degree and focus on individual areas of particular interest
- Students will learn about the design, synthesis, characterisation, production and development of polymeric materials throughout the programme. The materials covered in the programme include plastics, rubber, composites, paper, wood and other biological materials
Read more
MSc Polymer Technology at KTH Sweden Scholarships
MSc Polymer Technology
at KTH Sweden
Resources for you
Learn the process in simple steps with these guides handpicked for you
Explore courses offered by KTH Sweden
Select the Stream you are Interested in
Other Courses offered by KTH Sweden
2 years
View Other 74 Courses
About the author
Kanishk Aggarwal
Study Abroad Expert
Kanishk Aggarwal is a content writer at Shiksha.com, creating content for universities abroad. Having pursued an M.Sc. in Forensic Science from GD Goenka University, Gurugram, he has been creating content across diverse domains. When not guiding stud...Read Full Bio
MSc Polymer Technology at KTH Sweden Popular & recent articles
MSc Polymer Technology
at KTH Sweden
View more articles
MSc Polymer Technology at KTH Sweden Contact Information
MSc Polymer Technology
at KTH Sweden