MSc in Materials Engineering (Additive Manufacturing)
3.7 /5
- Public University
Faculty of Science & Technology
Talk to ExpertMSc in Materials Engineering (Additive Manufacturing) at Uppsala University Overview
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
Uppsala University offers courses at PG level. The course lasts for a duration of 2 years. It is among the top-ranked courses in the country. To be eligible for the course, the students must fulfil the eligibility criteria, which includes valid score in exams such as IELTS, TOEFL and PTE. The Uppsala University tuition fee for MSc in Materials Engineering (Additive Manufacturing) for the first year is SEK 290,000 (INR 2,844,900). Also, the students have to make budget for the other costs which includes:
- Rent
- Hostel fees
- Food
- Books
- Supplies
- Utilities, etc.
Duration | 2 years |
Tuition & Fees | ₹28.07 Lakh Get Fees details |
International Students Admission Website | Go to Website  |
Course Level | PG Degree |
Mode of Course | Full Time |
MSc in Materials Engineering (Additive Manufacturing)
Table of contents
MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Fees
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
To get admission in MSc in Materials Engineering (Additive Manufacturing) at Uppsala University students need to cover tuition fees and living costs. The fee structure varies based on whether the student is domestic or international. For international students the tuition fee for the first year is SEK 290,000 (INR 2,844,900). In addition to these students should budget for
- Other living expenses
- including
- housing
- food
- transportation
- books and personal expenses
1st year tuition fees | Fees components | Amount (for 1 year) |
|---|---|
| Tuition & fees | INR 28,06,715 |
Other expenses in 1st Year | Fees components | Amount (for 1 year) |
|---|---|
| Transportation | INR 4,839 |
| Mobile/Internet | INR 2,903 |
Calculated at the exchange rate of 1 SEK = INR 9.678327 | Tuition & expenses were last updated on 20ᵗʰ August 2026Download exam sample paper
IELTS
IELTS
TOEFL
PTE
MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Entry Requirements
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
Requirements for 12th grade
- No specific cutoff mentioned
Graduation
- 55%
- Read less
- A Bachelors degree equivalent to a Swedish Kandidatexamen from an internationally recognised university.
- Also required:
- 60 credits in materials science, materials engineering, materials physics or materials chemistry, or 60 credits mechanical engineering in combination with 10 credits of materials science, materials engineering, materials physics and/or materials chemistry;
- 15 credits in mathematics including linear algebra and calculus;
- 5 credits statistics;
- 5 credits mechanics;
- practical experience of laboratory work and ability to use computer-based calculation tools, such as MATLAB, CAD such as Solid Works or FEM such as COMSOL.
Convert your GPA to Percentage
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 4
TOEFL
- No specific cutoff mentioned
Sign-up to view details
Convert your GPA to Percentage
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 4
PTE
- No specific cutoff mentioned
IELTS
- Marks - 6.5/9
- Read less
- an overall score of 6.5 and no section below 5.5
- Get a Full FREE IELTS Prep Course with Shiksha Study Abroad – Limited Seats for Weekend & Weekday Batches! Register now for IELTS
Sign-up to view details
MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Rankings
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
Course Ranking
University Ranking
| Rank | Rank Publisher |
|---|---|
| #24 | |
| #56 | |
| #76 |
MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Placements
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
| Particulars | Statistics (2021) |
|---|---|
| Internship Available | Yes |
Uppsala UniversityStudents Ratings & Reviews
3.7/5
3 Verified ReviewsStudent Views (Based on Reviews)
- 25% students never faced discrimination in this university
Vibe of Campus
Friendly
Fun loving
Academically oriented
Stressful
Internships3
Part time work3.3
Post study jobs3
Quality of faculty4.3
Student Life4
Value for money3.3
Public transportation4.3
Safety4.3
Indian Food3.3
Permanent Immigration3.7
A
Anonymous
Master of Medical Science in Molecular Medicine - Batch of 2024
4.3
Study under the Aurora Borealis and make a memory for a lifetime.
Tips: The students should be well aware of how the weather is going to be, as it could be harsh for some, but many might enjoy it. Moving abroad has been a new experience you learn to handle a lot of things alone, and you definitely will undergo a cultural change that will bring out a new perspective for students at Uppsala. It's quite competitive to get a scholarship, as a majority of students compete for 1 scholarship; hence, it's quite hard to get.
Likes (Quality of faculty): In my opinion, I had a good experience with the faculty, they were approachable, kind and understanding. The teaching methodology is very research-based. You get to learn a lot of new techniques that have been developed by various PIs in Uppsala, which is quite a game changer. The teaching faculty is quite diverse.
Dislikes (Post study jobs): Unlike India, where there are placement offices and a special team working to ensure you get a job, it doesn't work like that in Sweden. It's heavily reliant on networking. To work in academia is also the same, as it is quite competitive and students are required to get in touch with PIs as early as they would like to start working. The majority of the companies in Sweden sponsor visas for work, but with the change in the job market, it's quite tough to land the right job at the right moment. The tip for upcoming students is to begin early. Job roles and salary are dependent on your experience and needs. As a fresher, you can expect anything between 33,500-38,000 SEK before taxes as the salary.
Total Monthly ExpenseSEK 9000
Prepping time for classes30 hours/Week
Expected Annual SalarySEK 150000
A
Anonymous
Master of Pharmaceutical Science in Biopharmaceuticals - Batch of 2025
2.9
Average University, much better options available.
Tips: Education level is very low as compared with Indian or US education level. I am finding it hard to cope with Swedish education system. Teaching is done by PhD students and not by professors most of the time. Assignment is the only thing you have to do. I am considering to drop out of the University in next semester.
Likes (Public transportation): Public transport is good but very expensive. Buses are well connected with campus and city centre. The only good thing about this city is public transport. During snow, buses run late but it's everywhere. Trains are well on time usually. So public transport is good.
Dislikes (Part time work): There are very less part time jobs. Also if some jobs are available they pay you very less money. On-campus jobs are near to impossible to secure as they always want Swedish speaking candidates. Same with part time jobs no scope for English speaking population.
Total Monthly ExpenseSEK 1347
Prepping time for classes40 hours/Week
Expected Annual SalarySEK
sethuraman Narayanan
MS in Bioinformatics (Biology Background) - Batch of 2024
3.8
Affordable and the best, best student life and amazing experience.
Tips: Students should know the weightage of their course work and they have to plan accordingly. Also there will be more hindrances and hurdles while you study here in Europe. You need to be prepared for that and you should stay motivated. I would suggest that Europe is the best place to do your master's degree.
Likes (Student Life): I have the best student life here. I met so many international people here and had a wonderful experience. Parties, group discussions, study groups everything here is amazing and mind-blowing. I really like the vibe of the city and the amazing student experience
Dislikes (Internships): Low opportunities for internships here, for my course I either have to go to some other city or I cannot do it remotely. A lot of research opportunities are there but a year of experience is needed for all the jobs and internships here. Getting internships is pretty hard for my course here.
Total Monthly ExpenseSEK 778
Prepping time for classes21 hours/Week
Expected Annual SalarySEK 17451
A
Anonymous
MSc in Image Analysis and Machine Learning - Batch of 2023
4.0
Uppsala university is good.
Tips: Uppsala University provides students with a great student life. The university provides a balance between rigorous academic life and fun social life. The city of Uppsala, as a student city, is very welcoming, where you can find your community for every interest.
Total Monthly ExpenseSEK 7950
Prepping time for classes20 hours/Week
Expected Annual SalarySEK 150000
View All 4 Reviews
MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Highlights
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
- MSc in Materials Engineering (Additive Manufacturing) is offered by Faculty of Science & Technology under Uppsala University, Sweden.
This a Masters level program of a course duration of 2 Years.
Download the brochure to read more details of this course.
MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Scholarships
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
Resources for you
Learn the process in simple steps with these guides handpicked for you
Explore courses offered by Uppsala University
Select the Degree you are Interested in
Other Courses offered by Uppsala University
Similar courses in different Universities
KTH Royal Institute of Technology
Stockholm, SwedenPublic
KTH Royal Institute of Technology
Stockholm, SwedenPublic
Technical University of Denmark
Kongens Lyngby, DenmarkPublic
Aalto University
Espoo, FinlandPublic
Poznan University of Technology
Poznan, PolandPublic
Sapienza University of Rome
Rome, ItalyPublic
University of Bologna
Bologna, ItalyPublic
Glasgow Caledonian University
Glasgow, UKPublic
University of Groningen
Groningen, NetherlandsPublic
About the author
Study in SwedenUniversities in SwedenUniversities in UppsalaUppsala UniversityMSc in Materials Engineering (Additive Manufacturing)MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Popular & recent articles
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
View more articles
MSc in Materials Engineering (Additive Manufacturing) at Uppsala University Contact Information
MSc in Materials Engineering (Additive Manufacturing)
at Uppsala University
Address
Uppsala University, P.O. Box 256, SE-751 05 Uppsala, SWEDEN
Uppsala ( Other - Sweden)
Phone
+46 18 471 47 10
(For general query)
+46 18 471 00 00
(For admission query)
Email
Go to College Website ->