Master of Science in Computational Mechanics of Materials and Structures
4.1 /5
- Public University
Institute of Applied Mechanics
Talk to ExpertMaster of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Overview
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
Our counselors guided 1 student in securing admission to this course. Know moreUniversity of Stuttgart has been pioneering Master of Science in Computational Mechanics of Materials and Structures at PG level. The program has a duration of 2 years. This particular course is directed towards individuals who seek a higher level of the educational cycle. The program is considered one of the best in the country, which is responsible for the program's excellent quality and honouring. For the course, applicants must satisfy evaluation based on eligibility criteria among which entrance scores obtained in tests such as IELTS and TOEFL are imperative for attaining admission. The University of Stuttgart tuition fee for the first year to pursue this course is EUR 3,000. Added should be living expenditures, rent, hostel fees, boards, books and supplies, utilities, or any other expense for the course. This complete budgeting plan ensures that the students go through their college life hassle-free.
Duration | 2 years Get Curriculum |
Tuition & Fees | ₹3.55 Lakh Get Fees details |
International Students Admission Website | Go to Website  |
Official Career Service Website | Go to Website |
Course Level | PG Degree |
Master of Science in Computational Mechanics of Materials and Structures
Table of contents
Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Fees
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
University of Stuttgart Master of Science in Computational Mechanics of Materials and Structures fee structure includes first-year tuition fee that all the students have to pay. The total expense may vary, depending on the additional charges provided by the University of Stuttgart. The total first-year tuition fees of Master of Science in Computational Mechanics of Materials and Structures is EUR 3,000.
To know more about University of Stuttgart Master of Science in Computational Mechanics of Materials and Structures fee breakup, check out the table below:
1st year tuition fees | Fees components | Amount (for 1 year) |
|---|---|
| Tuition & fees | INR 3,55,021 |
Other expenses in 1st Year | Fees components | Amount (for 1 year) |
|---|---|
| Insurance | INR 1,15,951 |
| Transportation | INR 63,246 |
Calculated at the exchange rate of 1 Euro = INR 105.41 | Tuition & expenses were last updated on 15ᵗʰ April 2025Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Curriculum
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
Candidates interested in the University of Stuttgart Master of Science in Computational Mechanics of Materials and Structures course can easily download the detailed curriculum by clicking the green button below. The disciplines that will be taught during the program, the different electives that students can select from, and other crucial course material are all included in one extensive PDF. It also includes a synopsis of the course structure per semester, which helps potential students see how their academic path will develop over time.
Download exam sample paper
IELTS
IELTS
TOEFL
PTE
Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Entry Requirements
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
Requirements for 12th grade
- No specific cutoff mentioned
Graduation
- No specific cutoff mentioned
Applicants must meet the following requirements:
- A Bachelor degree in Engineering or Natural Science or a related field.
Convert your CGPA to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 10
TOEFL
- Marks - 79/120
- TOEFL IBT 79Register for TOEFL iBT® Test Today and get Rs 500 Off. Use code SHIKTOEFL to avail the discount. Hurry Register now for TOEFL
Sign-up to view details
Convert your CGPA to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 10
PTE
- No specific cutoff mentioned
IELTS
- Marks - 6.5/9
- IELTS - 6.5
- Get a Full FREE IELTS Prep Course with Shiksha Study Abroad – Limited Seats for Weekend & Weekday Batches! Register now for IELTS
Conditional Offer
- Yes
- Read lessConditional admission is possible in any Master’s study program whose admissions regulation was promulgated from 2011 on and for which a Numerus Clausus (NC), i.e. a limited number of places available, has not been set. Bachelor’s students can apply for conditional admission if they have a certain number of credit points (ECTS). The exact number is set down in each Master’s study program’s admissions regulation; normally, the number is 110 credit points. Students are required to provide evidence of the claimed ECTS in the form of their exams extract at the time they apply.
Sign-up to view details
Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Application Process
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
Step one
Additional documents required
- A school certificate authorizing the holder to enter a university or an authorization regarded as equivalent by the board of examination of COMMAS
- Academic Transcripts
- Proof of English Language Proficiency
- Copy of Passport
- Applicants must need to show their German language proficiency
- Country-specific documentation: Applicants with educational credentials from the below country must upload these additional documents:
- India - Certificate issued by Academic Examination Office (APS) in the Embassy of the Federal Republic of Germany.
- Exams extract with grade point average
- Bachelor's diploma, if you completed your Bachelor's studies and already received the diploma
- Depending on the subject, there may be supplementary amendments that you should attach to the application.
- Description of the contents of your completed Bachelor's study program
Step two
Start your online application
Step three
Application deadline
Winter (Oct): 15th Feb
*The dates specified are tentative dates as per the previous year records. Our expert counselors can help with exact deadline date. Connect with the expert now!
Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Rankings
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
Course Ranking
University Ranking
| Rank | Rank Publisher |
|---|---|
| #101 | |
| #82 | |
| #151 |
University of StuttgartStudents Ratings & Reviews
4.1/5
29 Verified ReviewsStudent Views (Based on Reviews)
- 58% students never faced discrimination in this university
Vibe of Campus
Academically oriented
Friendly
Multi-dimensional
Stressful
Internships3.8
Part time work4.3
Post study jobs3.6
Quality of faculty4.2
Student Life4.2
Value for money4
Public transportation4.7
Safety4.8
Indian Food3.7
Permanent Immigration3.7
A
Anonymous
MSc in Vehicle Technology (In German) - Batch of 2026
4.2
Theory and research-oriented study program.
Tips: In Germany, there is a division when it comes to higher education - 'University' and 'University of applied sciences'. University focuses more on research and university of applied sciences focus on applied knowledge. Since Stuttgart is a University, it is more theoretical. It is completely in our responsibility to gain experience through clubs, Formula Student or similar things. So it might be stressful, but it is manageable.
Likes (Safety): Germany is generally safe compared to other European countries. Immediate help on and off campus from mentors and tutors. It is easy to get help even from the police or the general public in case of emergencies. There are lots of international affairs people in the university or general coordinators who make sure students feel safe on campus.
Dislikes (Part time work): On campus part time jobs are extremely scarce to find. Also the competition is higher. The pay is relatively very low compared to off campus part time jobs. Since International students who already pay large tuition fee, they won't be choosing on campus jobs unless they are really desperate for a part time job.
Total Monthly ExpenseEuro 800
Prepping time for classes15 hours/Week
Expected Annual SalaryEuro 50000
A
Ayush Mittal
MSc in Electrical Engineering - Batch of 2024
3.9
Research oriented prestigious university.
Tips: This is a university oriented towards research. Good mathematical skills are expected. There will be some cultural differences in lectures but that will be on the positive side. I did not apply for any scholarships. However, you can look for DAAD scholarships. I liked the course, teaching material and especially the professors.
Likes (Safety): The city is very well connected through public transport via the university campus. I have lived there for 3 years and never heard a concern about safety. You could see police patrolling every in the campus at night sometimes. There are many helpline numbers for emergencies. However it is always advised not to travel alone in secluded areas which is a general advice valid for every place. There is not much of a nightlife in the city, so there is not much you could do during the dark hours.
Dislikes (Post study jobs): The job market is pretty bad at the moment. Moreover, even with good German language skills the opportunities are too less. Work sponsorship is not needed. You just need to find a job with a minimum salary range then you can get the EU blue card which is a work permit. Generally, after graduation, you can get into a PhD programme, of course you will have a stipend which is approximately 55,000. So it is pretty decent. Apart from this you can work in the industry with an average salary of 60,000 however, it is difficult to find one at the moment. Internships are easy to get but a full-time job is hard.
Total Monthly ExpenseEuro 850
Prepping time for classes10 hours/Week
Expected Annual SalaryEuro 60000
V
Vaibhav Bardhan
Master of Science in Computational Mechanics of Materials and Structures - Batch of 2026
4.3
Challenging but rewarding journey at University of Stuttgart.
Tips: Students should be prepared for a rigorous, mathematically intensive programme. COMMAS is research driven, so self study and good fundamental knowledge in mathematics and programming are important though not necessary. Administrative processes in Germany can be slow, so patience and planning are essential.
Likes (Safety): Student residences have controlled entry systems. I have always felt safe moving around Stuttgart even when it's midnight. The police presence is consistent even when it's too late. The city is generally calm, well organised. I have never had any negative experience so far.
Dislikes (Quality of faculty): The teaching is highly theoretical and research oriented. The faculty is not very diverse in nationality. They are often very busy with research and projects. Some professors use advanced simulation examples, which is a unique strength. Getting quick response from the professors can sometimes be difficult.
Total Monthly ExpenseEuro 800
Prepping time for classes40 hours/Week
Expected Annual SalaryEuro 59750
A
Anonymous
MSc in Electrical Engineering - Batch of 2025
4
Academically oriented university with good opportunities.
Tips: It's important to research about the course that one is taking. For the Electrical Engineering Master's, a few courses are difficult. It's important to choose a subject that interests you. It's always good to get an opinion about each subject from any senior students before writing the exam. Once you write an exam, it's not possible to register for that subject.
Likes (Part time work): There are good Indian restaurants in the city, but not many options when it comes to South Indian food. There are Sri-lankan restaurants, which do provide good south Indian food as well. Mostly, students cook for themselves as dining out is not an affordable option.
Dislikes (Indian Food): There are good Indian restaurants in the city, but not many options when it comes to South Indian food. There are Sri-Lankan restaurants, which do provide good South Indian food as well. Mostly, students cook for themselves as dining out is not an affordable option.
Total Monthly ExpenseEuro 850
Prepping time for classes20 hours/Week
Expected Annual SalaryEuro 65000
A
Anonymous
MSc in Electrical Engineering - Batch of 2026
4.4
My honest take on studying in Stuttgart.
Tips: Well, students should know that Stuttgart is a big city and you might feel a bit lost in the beginning. If you are someone who likes European architecture and buildings, I will have to disappoint you because Stuttgart is not the most beautiful city when it comes to architecture. They do have a lot of industrial opportunities which also comes with a lot of competition from other international students. Unfortunately you also won't have the most international environment in your classes if you decide to pursue engineering here because mostly there are Indians so you might have to put yourself more out there for sports and extra curricular activities so that you can interact with more international people. We do have a lot of nature spots here. If you like nature and forest and hiking, you might like it here, especially on the Vaihingen campus at the University of Stuttgart.
Likes (Quality of faculty): The faculty here is highly qualified and they have themselves studied from the world's best institutions. They are quite passionate at what they do. The research institutes also offer a wide range of thesis topics which can be pursued in order to fulfil your areas of expertise in the course of your Masters studies.
Dislikes (Permanent Immigration): The chances of permanent settling in the city of Stuttgart are less because the Visa office has really long waiting days. If you need to switch your visa from student to job seeker or a full time employee, it is a very overwhelming process. You could work in Stuttgart but it is highly recommended to shift to nearby cities in order to have smooth paperwork regarding the bureaucracy.
Total Monthly ExpenseEuro 1000
Prepping time for classes10 hours/Week
Expected Annual SalaryEuro 45000
View All 31 Reviews
Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Highlights
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
- COMMAS is about the development and implementation of numerical methods based on the principles of mechanics, mathematics, and computer science. Students learn different practical and powerful approaches to model, understand, and predict responses of complex materials and structures encountered in almost all engineering disciplines
- Students are usually asked to prepare a study plan and encouraged to get in touch with the advising professors to make sure that they can find out their interest areas and decide on the electives
- Graduates of this program can apply their knowledge in almost all engineering problems. Examples are simulation of automobile crash tests, prediction of failure load of materials, modeling biological tissues, development of functional materials to be used in robotics among others.
Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Scholarships
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
Scholarship information is not available. You can apply to non-college specific scholarships available for
Germany.
View all 32 scholarships
Resources for you
Learn the process in simple steps with these guides handpicked for you
Explore courses offered by University of Stuttgart
Select the Degree you are Interested in
Other Courses offered by University of Stuttgart
2 years
2 years
View Other 162 Courses
Similar courses in different Universities
Braunschweig University of Technology
Brunswick, GermanyPublic
University of Applied Sciences Lubeck
Lubeck, GermanyPublic
Technische Universität Darmstadt
Darmstadt, GermanyPublic
University of Stuttgart
Stuttgart, GermanyPublic
Technical University Dortmund
Dortmund, GermanyPublic
Esslingen University of Applied Sciences
Esslingen, GermanyPublic
Hamburg University of Technology
Hamburg, GermanyPublic
Karlsruhe Institute of Technology
Karlsruhe, GermanyPublic
University of Stuttgart
Stuttgart, GermanyPublic
About the author
Tasneem Hoda is a Content Creator and Writer working for Shiksha.com. Her role includes developing and maintaining web pages for international universities at the Shiksha Study Abroad Portal, ensuring accuracy, completeness, and alignment with instit...Read Full Bio
Study in GermanyUniversities in GermanyUniversities in StuttgartUniversity of StuttgartMaster of Science in Computational Mechanics of Materials and StructuresMaster of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Popular & recent articles
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
View more articles
Master of Science in Computational Mechanics of Materials and Structures at University of Stuttgart Contact Information
Master of Science in Computational Mechanics of Materials and Structures
at University of Stuttgart
Address
Keplerstrasse 7, 70174 Stuttgart, Germany
Stuttgart ( Other - Germany)
Phone
Go to College Website ->