Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
4.3 /5
- Public University
Department of Mechanical Engineering
Talk to ExpertMaster of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Overview
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
International students can pursue Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering (In German) at PG level at Technical University of Munich. The duration of the course at the university is 2 years. The course is among the top-ranked courses in the International students must meet the entry requirements such as complete academic qualification, a valid test score in exams such as IELTS, TOEFL and PTE to be eligible for the course. The University fees for international students for Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering (In German) is around EUR 12,000 for first-year. Students must manage additional costs such as
- Rent
- Hostel fees
- Food, books
- Supplies
- Utilities, etc.
Duration | 2 years Get Curriculum |
Tuition & Fees | ₹13.22 Lakh Get Fees details |
International Students Admission Website | Go to Website  |
Official Career Service Website | Go to Website |
Course Level | PG Degree |
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
Table of contents
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Fees
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
The Technical University of Munich Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering (In German) fees includes first year tuition fee and cost of living for international students. The first-year tuition fee is around EUR 12,000. The Technical University of Munich cost varies depending on the additional cost.
Refer to the table below for a detailed fee breakup of the Technical University of Munich Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering (In German).
1st year tuition fees | Fees components | Amount (for 1 year) |
|---|---|
| Tuition & fees | INR 13,22,266 |
Other expenses in 1st Year | Fees components | Amount (for 1 year) |
|---|---|
| Insurance | INR 1,21,208 |
| Mandatory Fees | INR 66,113 |
Calculated at the exchange rate of 1 Euro = INR 110.18882 | Tuition & expenses were last updated on 30ᵗʰ July 2025Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Curriculum
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
By clicking on the green icon below, students can download the PDF format of the university’s curriculum. From subjects taught to program credits, electives/specializations to choose from, and the semester-wise course structure. This PDF is packed with every detail of the Technical University of Munich for Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering (In German). Download now!
Download exam sample paper
IELTS
IELTS
TOEFL
PTE
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Entry Requirements
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
Requirements for 12th grade
- No specific cutoff mentioned
Graduation
- No specific cutoff mentioned
- Read less
- The minimum requirements to apply for a Master’s program at TUM are a recognized undergraduate degree (e.g. a Bachelor’s) and the successful completion of the aptitude assessment procedure. The aptitude assessment allows the TUM school to which students are applying to evaluate their individual talents and motivation for study
- specialised knowledge of fundamental subject areas relating to mechanical engineering:
- higher mathematics
- technical mechanics
- machine elements
- material science
- thermodynamics
- fluid mechanics
Convert your CGPA to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 10
3 year degree accepted
- N/A
- Applicant need an undergraduate degree which is at least equal to a German bachelor's degree with a duration of 3 years (6 semester) to be eligible to apply for a master's program
Sign-up to view details
Convert your CGPA to GPA
Calculate your score and check your eligibility at over 2000+ universities.
GPA
Percentage
CGPA
Out of 10
TOEFL
- No specific cutoff mentioned
PTE
- No specific cutoff mentioned
IELTS
- No specific cutoff mentioned
- Not mandatory
Other eligibility criteria
- Selection takes place through an aptitude assessment procedure. The aptitude assessment is a two-part procedure after the submission of an official application to a program. In this procedure, the TUM school determines whether students meet the specific requirements for its Master’s degree program
- In the initial stages, the grades students obtained during their Bachelor’s program, as well as written documents, will be evaluated using a point system. Depending on the amount of points accumulated, applicants are either immediately admitted, rejected or invited to an admissions interview
- Proof of German Language Proficiency is required
Sign-up to view details
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Rankings
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
Course Ranking
University Ranking
| Rank | Rank Publisher |
|---|---|
| #15 | |
| #16 | |
| #76 |
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Placements
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
| Particulars | Statistics (2025) |
|---|---|
| Internship Available | Yes, This degree program does not encompass a compulsory internship nor is an internship a requirement for admission. However, it is recommendable, as a rule, to gain practical experience as soon as possib This degree program does not encompass a compulsory internship nor is an internship a requirement for admission. However, it is recommendable, as a rule, to gain practical experience as soon as possible. |
Technical University of MunichStudents Ratings & Reviews
4.3/5
86 Verified ReviewsStudent Views (Based on Reviews)
- 54% students never faced discrimination in this university
Vibe of Campus
Academically oriented
Multi-dimensional
Stressful
Friendly
Internships4.1
Part time work4
Post study jobs3.9
Quality of faculty4.5
Student Life4.2
Value for money4.5
Public transportation4.7
Safety4.9
Indian Food3.8
Permanent Immigration3.9
A
Anonymous
Master of Science in Communications and Electronics Engineering - Batch of 2026
5.0
TUM is the land of Opportunities.
Tips: Technical University of Munich (TUM) has allowed me to grow not just personally but also professionally. Managing studies and part-time work was always challenging. I will advise learning German up to the A2/B1 level to get part-time jobs quickly after landing here.
Total Monthly ExpenseEuro 850
Prepping time for classes20 hours/Week
Expected Annual SalaryEuro 52000
A
Anonymous
Bachelor of Science (B.Sc.) in Information Engineering - Batch of 2027
4.4
I genuinely think my university prepares for the practical career paths after college.
Tips: I did experience a culture shift. Academic processes and living standards are very different from my bringing. I didn't get any scholarship since education is free here. Very satisfied, although I need to go the extra mile to create a social life here.
Total Monthly ExpenseEuro 1300
Prepping time for classes20 hours/Week
Expected Annual SalaryEuro 70000
A
Anandu Krishna Surendran
Master of Science (M.Sc.) in Biomass Technology (In German) - Batch of 2025
3.1
A lot of opportunities so the competition.
Tips: You have to be flexible to align with a new culture, and balancing your academics and part-time job is not easy. Nowadays, finding part times are also getting difficult, but with a consistent mindset, you can earn one. Indeed, Xing and similar websites/apps can be very helpful in finding jobs.
Likes (Quality of faculty): The faculty are highly educated and talented and would help us with everything. They share their intellectual property and ideas with us and treat us without any discrimination. Quality faculty can help us academically, but getting a job after the course, they can’t do anything.
Dislikes (Internships): There are a lot of internship opportunities, but getting one is highly competitive, and you have to apply for a lot to get into one. Nowadays, the competition is among Indian students because we have a minimum of bachelor's degrees, English knowledge, and a good IT background, which makes us a good choice for companies, but there are a lot!!
Total Monthly ExpenseEuro 1500
Prepping time for classes20 hours/Week
Expected Annual SalaryEuro 48200
D
Durganshu Mishra
Master of Science (M.Sc.) in Computational Science and Engineering (CSE) - Batch of 2024
4.9
TUM: An amazing university that offers great learning experience.
Tips: Learn at least B1 level of German, even though your course is in English - Scholarship opportunities are mostly limited to students with some German skills, but there are a few that don't require German skills. Do good research in this area. - I really enjoyed being at TUM. It has an amazing culture and research environment. If given a chance, I'll do it all over again.
Likes (Internships): There are a lot of internship-related opportunities in and out of TUM. CSE doesn't have a mandatory internship, but if somebody wants to do one, they get sufficient support from the course coordinators. Focus on building a strong network with PhDs and professionals to get good internship opportunities.
Dislikes (Post study jobs): You don't need sponsorship to work in Germany. However, the rank of a university doesn't have a lot of impact on job applications. Apart from TUM Career-related initiatives and some job fairs, students don't get any direct support in their job search.
Total Monthly ExpenseEuro 850
Prepping time for classes30 hours/Week
Expected Annual SalaryEuro
R
Rayan Bandyopadhyay
Master of Arts in Science and Technology Studies (STS) - Batch of 2028
4.3
There are levels to this
Tips: Should have some grasp of the German language. Scholarships are given on the basis of academic achievements in some semesters. I'm really satisfied with my university teaching as well as hackathons and other co-curricular activities. It's an all-round university.
Total Monthly ExpenseEuro 1325
Prepping time for classes12 hours/Week
Expected Annual SalaryEuro 61300
View All 101 Reviews
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Highlights
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
- Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering (In German) is offered by Department of Mechanical Engineering under Technical University of Munich, Germany.
This a Masters level program of a course duration of 2 Years.
Download the brochure to read more details of this course.
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Scholarships
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
Resources for you
Learn the process in simple steps with these guides handpicked for you
Explore courses offered by TU Munich
Select the Degree you are Interested in
Other Courses offered by TU Munich
Similar courses in different Universities
RWTH Aachen University
Aachen, GermanyPublic
Hamburg University of Technology
Hamburg, GermanyPublic
University of Stuttgart
Stuttgart, GermanyPublic
University of Stuttgart
Stuttgart, GermanyPublic
Hamburg University of Technology
Hamburg, GermanyPublic
RWTH Aachen University
Aachen, GermanyPublic
Technical University of Munich
Munich, GermanyPublic
Technical University Dortmund
Dortmund, GermanyPublic
About the author
Study in GermanyUniversities in GermanyUniversities in MunichTU MunichMaster of Science (M.Sc.) in Development, Production and Management in Mechanical EngineeringMaster of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Popular & recent articles
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
View more articles
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering at TU Munich Contact Information
Master of Science (M.Sc.) in Development, Production and Management in Mechanical Engineering
at TU Munich
Address
Technical University of Munich
Arcis street 21, D-80333 Munich, Germany
Munich ( Other - Germany)
Phone
Email
Go to College Website ->