

MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German)
- Public University
Faculty of Construction, Production and Vehicle Technology
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Overview
The University of Stuttgart offers a really good MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) program at the PG level, which lasts for 2 years. To get admission to the program, students must meet the requirements for the course which include having a valid score on tests like IELTS. The University of Stuttgart tuition fee for the first year of the MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) is EUR 3,000. Also, the students should budget well for living expenses, which has:
- Accommodation (rent or hostel)
- Food
- Books
- Other important utilities
Duration | 2 years |
Tuition & Fees | ₹3.45 Lakh Get Fees details |
International Students Admission Website | Go to Website |
Official Career Service Website | Go to Website |
Course Level | PG Degree |
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Fees
For enrolling at the University of Stuttgart, for MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German), students must pay the tuition and living cost. Moreover, the University of Stuttgart MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) fee structure can vary from domestic to international students.
International students must pay the EUR 3,000 for the first year. Along with this, they must be ready for other costs of living such housing, food, transportation, books and supplies, and other miscellaneous expenses. Check out University of Stuttgart MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) on the fee breakup, from the table mentioned below.
| Fees components | Amount (for 1 year) |
|---|---|
| Tuition & fees | INR 3,44,782 |
| Fees components | Amount (for 1 year) |
|---|---|
| Insurance | INR 1,12,607 |
| Transportation | INR 61,422 |
Download exam sample paper
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Entry Requirements
- No specific cutoff mentioned
- No specific cutoff mentioned
- Read less
Applicants must meet the following requirements:
- The Master’s study program in Mechanical Engineering / Micro Engineering, Apparatus Technology and Technical Optics is for Bachelor’s degree holders in the following fields:
- Mechanical engineering
- Automotive and engine technology
- Technology management
- Mechatronics
- Engineering cybernetics
- Aerospace engineering
- Electrical engineering and information technology
- Physics (conditionally)
- The Master’s study program in Mechanical Engineering / Micro Engineering, Apparatus Technology and Technical Optics is for Bachelor’s degree holders in the following fields:

Calculate your score and check your eligibility at over 2000+ universities.
Out of 10
- No specific cutoff mentioned

Calculate your score and check your eligibility at over 2000+ universities.
Out of 10
- No specific cutoff mentioned
- Not mandatory
- Get a Full FREE IELTS Prep Course with Shiksha Study Abroad – Limited Seats for Weekend & Weekday Batches! Register now for IELTS
The following examinations and certificates are accepted as proof of German language proficiency:
- Test of German as a foreign language [de] (TestDaF 4x4) for foreign applicants with a result of TestDaF level 4 or better in all four parts of the test
- Goethe Certificate C1 or C2 (Großes deutsches Sprachdiplom/GDS) from the Goethe Institute
- Großes or Kleines Deutsches Sprachdiplom or High School examination (Zentrale Oberstufenprüfung (ZOP)) from the Goethe Institute (old version until 01.01.2012)
- German Language Diploma (Deutsches Sprachdiplom) from the Standing Conference of the Ministers of Education and Cultural Affairs - Level II (DSD II)
- Passing the German section of an assessment test at a preparatory college (“Examination to determine the aptitude of foreign applicants for admission to a course of study at universities in the Federal Republic of Germany”) (Studienkolleg)
- Starting from the summer semester 2025: “telc Deutsch C1 Hochschule” exam
- Starting from the summer semester 2025: German language examination for university admission for foreign applicants (DSH) with an overall result of DSH-2 or above
- Starting from the summer semester 2025: Certificate of the Austrian Language Diploma C2 (Österreichische Sprachdiplom C2) (ÖSD C2)
- German Language Test II (Deutsche Sprachprüfung II) from the Munich Language and Interpreting Institute
- A degree of which the courses were instructed in the German language (Bachelor's, Master's, Diplom)
- Yes
- Read lessConditional admission is possible in any Master’s study program whose admissions regulation was promulgated from 2011 on and for which a Numerus Clausus (NC), i.e. a limited number of places available, has not been set. Bachelor’s students can apply for conditional admission if they have a certain number of credit points (ECTS). The exact number is set down in each Master’s study program’s admissions regulation; normally, the number is 110 credit points. Students are required to provide evidence of the claimed ECTS in the form of their exams extract at the time they apply.
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Rankings
| Rank | Rank Publisher |
|---|---|
| #82 | |
| #101 | |
| #201 |
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Placements
| Particulars | Statistics (2025) |
|---|---|
| Internship Available | Yes, The course includes an internship program. A twelve-week industrial internship is an important component of this study program, providing students with practical insights into what it is like to work The course includes an internship program. A twelve-week industrial internship is an important component of this study program, providing students with practical insights into what it is like to work in this growth market |
University of StuttgartStudents Ratings & Reviews
- 54% students never faced discrimination in this university
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Highlights
- This Master’s studies program deepens knowledge of mechanical engineering with a specialization in the field of microengineering, apparatus technology, or technical optics in application to the following occupational fields
- Occupational fields include:
Micro- or nanotechnology
Microsystems engineering
Electronics manufacturing
Actuator engineering in apparatus technology
Apparatus design and manufacture
Lasers in materials processing
Technical optics and optical measurement systems Biomedical technology and medical device technology - These studies are scientifically-based, research-oriented, but also application-related. Students benefit from comprehensive supervisory offerings
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Scholarships
Resources for you
Learn the process in simple steps with these guides handpicked for youExplore courses offered by University of Stuttgart
Other Courses offered by University of Stuttgart
Similar courses in different Universities
Lubeck, GermanyPublic
Bochum, GermanyPublic
Brunswick, GermanyPublic
Dusseldorf, GermanyPublic
Kaiserslautern, GermanyPublic
Erlangen, GermanyPublic
Freiberg, GermanyPublic
Chemnitz, GermanyPublic
Esslingen, GermanyPublic
Rosenheim, GermanyPublic
About the author
Study Abroad Expert
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Popular & recent articles
MSc in Mechanical Engineering / Microtechnology, Device Technology and Technical Optics (In German) at University of Stuttgart Contact Information
Keplerstrasse 7, 70174 Stuttgart, Germany
Stuttgart ( Other - Germany)




