BEng in Mechanical and Manufacturing Engineering
3.9 /5
- Public University
Faculty of Engineering and Computing
Talk to ExpertBEng in Mechanical and Manufacturing Engineering at Dublin City University Overview
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
International students can pursue BEng in Mechanical and Manufacturing Engineering at UG level at Dublin City University. The duration of the course at the university is 4 years. The course is among the top-ranked courses in the International students must meet the entry requirements such as complete academic qualification, a valid test score in exams such as IELTS, TOEFL, PTE and Duolingo to be eligible for the course. The Dublin City University tuition fee for international students for BEng in Mechanical and Manufacturing Engineering is around EUR 16,000 for first-year. Students must manage additional costs such as
- Rent
- Hostel fees
- Food, books
- supplies
- Utilities, etc.
Duration | 4 years |
Tuition & Fees | ₹16.38 Lakh Get Fees details |
International Students Admission Website | Go to Website  |
Official Career Service Website | Go to Website |
Course Level | UG Degree |
BEng in Mechanical and Manufacturing Engineering
Table of contents
BEng in Mechanical and Manufacturing Engineering at Dublin City University Fees
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
For enrolling at the Dublin City University, for BEng in Mechanical and Manufacturing Engineering, students must pay the tuition and living cost. Moreover, the Dublin City University BEng in Mechanical and Manufacturing Engineering fee structure can vary from domestic to international students.
International students must pay the EUR 16,000 for the first year. Along with this, they must be ready for other costs of living such housing, food, transportation, books and supplies, and other miscellaneous expenses. The average Dublin City University cost of living for international students is EUR 6,076. Check out Dublin City University BEng in Mechanical and Manufacturing Engineering on the fee breakup, from the table mentioned below.
1st year tuition fees | Fees components | Amount (for 1 year) |
|---|---|
| Tuition & fees | INR 16,37,920 |
Other expenses in 1st Year | Fees components | Amount (for 1 year) |
|---|---|
| Hostel & Meals | INR 6,22,000 |
| Insurance | INR 48,012 |
Calculated at the exchange rate of 1 Euro = INR 102.37 | Tuition & expenses were last updated on 26ᵗʰ February 2025Download exam sample paper
TOEFL
TOEFL
PTE
IELTS
Duolingo
BEng in Mechanical and Manufacturing Engineering at Dublin City University Entry Requirements
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
Requirements for 12th grade
- 80%
- Read less
- Applicants must have passed high school
-
Applicants presenting with the Standard XII from an acceptable recognised exam board with an average of 80% may be considered for direct entry into Undergraduate programmes at DCU.
-
Applicants who have completed an alternative qualification from this nation may be considered for direct entry into Undergraduate programmes at DCU.
- Prerequisites : Mathematics
TOEFL
- Marks - 92/120
-
Register for TOEFL iBT® Test Today and get Rs 500 Off. Use code SHIKTOEFL to avail the discount. Hurry Register now for TOEFL
-
PTE
- Marks - 63/90
- with a minimum of 59 in all components
Sign-up to view details
IELTS
- Marks - 6.5/9
- Read less
- with no less than 6.0 in any one component
- Get a Full FREE IELTS Prep Course with Shiksha Study Abroad – Limited Seats for Weekend & Weekday Batches! Register now for IELTS
Duolingo
- Marks - 120/160
- Read less
- A score of at least 110 in each subscore.
- Take Duolingo English Test from your home, in just 1 hour and get results in 2 days. 70% cheaper than other English Tests. Register now for Duolingo
Sign-up to view details
BEng in Mechanical and Manufacturing Engineering at Dublin City University Rankings
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
University Ranking
| Rank | Rank Publisher |
|---|---|
| #301 | |
| #152 | |
| #856 |
BEng in Mechanical and Manufacturing Engineering at Dublin City University Placements
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
| Particulars | Statistics (2021) |
|---|---|
| Internship Available | Yes |
Dublin City UniversityStudents Ratings & Reviews
3.9/5
117 Verified ReviewsStudent Views (Based on Reviews)
- 57% students never faced discrimination in this university
Vibe of Campus
Academically oriented
Friendly
Multi-dimensional
Fun loving
Internships3.4
Part time work3.8
Post study jobs3.8
Quality of faculty4.1
Student Life4.4
Value for money3.9
Public transportation4.4
Safety4.1
Indian Food3.7
Permanent Immigration3.9
A
Anonymous
MSc in Management of Operations - Batch of 2026
Offered by Dublin City University
3.4
The faculty is extremely helpful and understanding.
Tips: I didn't face a cultural shift as such as I had done my research beforehand. People are extremely polite here so ensure that you don't disturb them in any way. Scholarships are available that the university provides based on merit. I am truly satisfied with my university, course and country so far.
Likes (Quality of faculty): The faculty is extremely helpful and understanding they will help you with any and everything. The teaching style of faculty at its core is more preference given to self study and more on academic and real world examples in class and a lot of self reading. The teaching faculty is diverse and brings varying responses and thoughts to the table.
Dislikes (Permanent Immigration): Things are always changing here, especially with immigration, so that's why I gave it a 3. It's tough to get a permanent residency because it mostly depends on sponsorship. But I'd really love to stay here for good if I could, because I've enjoyed my time here a lot.
Total Monthly ExpenseEuro 1425
Prepping time for classes5 hours/Week
Expected Annual SalaryEuro 35050
A
Anonymous
MSc in Human Resource Management - Batch of 2026
Offered by Dublin City University
4
My transformative learning journey at DCU.
Tips: Students must know the fact that DCU offers a highly supportive academic environment where all the students should be prepared for a research oriented and fast paced learning.
Likes (Quality of faculty): The lecturers in my department are highly knowledgeable, well skilled and experienced. They ensure a supportive learning environment which combines a positive and inclusive classroom. The most important factor I have noticed about their teaching style is the use of practical real world case studies for discussion rather than just delivering information to the students. Since we have got lecturers from different nationalities and backgrounds, students are getting exposed to global perspectives at a higher level which prepares them professionally and academically.
Dislikes (Value for money): I feel the tuition fee to be relatively higher even though the quality of teaching, resources provided qualities are unmatched. I ensure that quality of the content and staff support are top notch. Additional student support activities can be incorporated on a regular basis.
Total Monthly ExpenseEuro 2000
Prepping time for classes30 hours/Week
Expected Annual SalaryEuro 35850
J
Jigyashu Rajput
MSc in Computing (with Major Options) - Batch of 2024
Offered by Dublin City University
4.7
Great college with strong learning in every subject and many societies to join based on interests.
Tips: The university offers a great learning experience with supportive faculty and diverse opportunities. Irish people are known to be warm, welcoming, and friendly. Always say "thank you" often, and avoid using "sir" for everyone; address people by their names instead. You should also remember there is not much difference in which university you join to complete your studies, since you have to do applications by yourself for jobs. Also, it is not that easy to get the jobs you need to do a lot of applications.
Total Monthly ExpenseEuro 900
Prepping time for classes25 hours/Week
Expected Annual SalaryEuro 40000
A
Anonymous
MSc in Finance - Batch of 2025
Offered by Dublin City University
3.3
Flexible but hectic during peak time.
Tips: Focus on finishing your course work first before looking for part time jobs. Be interactive and engage during classes. And be super careful with your assignments. Make sure they're all original and no plagiarism. The school takes that stuff super seriously and it could even lead to visa problems.
Total Monthly ExpenseEuro 1200
Prepping time for classes20 hours/Week
Expected Annual SalaryEuro
A
Anonymous
MSc in Finance - Batch of 2026
Offered by Dublin City University
3.6
Well designed to cater educational needs.
Tips: The accent was a bit challenging initially, but I eventually got used to it. I received a scholarship of 2000 euros, awarded based on my academic performance. I am satisfied with the university; it's fun and offers a good balance between part-time work and studies. The only downside is the weather.
Likes (Public transportation): It's all well-connected and well-designed, with most places offering 24/7 services. Students benefit from cheaper transportation paying just 1 euro for a 90-minute bus ride. While Ireland also has good rail and Luas systems the bus provides reliable 24/7 service.
Dislikes (Safety): Safety is everyone's utmost priority, but recently Indians have faced issues with teenagers, including bullying theft and fights. Garda is not readily available, and some loopholes favour teenagers, which are being exploited. Medical services are also not up to par.
Total Monthly ExpenseEuro 1000
Prepping time for classes30 hours/Week
Expected Annual SalaryEuro 40475
View All 124 Reviews
BEng in Mechanical and Manufacturing Engineering at Dublin City University Highlights
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
- BEng in Mechanical and Manufacturing Engineering is offered by Faculty of Engineering and Computing under Dublin City University, Ireland.
This a Bachelors level program of a course duration of 4 Years.
Download the brochure to read more details of this course.
BEng in Mechanical and Manufacturing Engineering at Dublin City University Scholarships
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
Resources for you
Learn the process in simple steps with these guides handpicked for you
Explore courses offered by Dublin City University
Select the Degree you are Interested in
Other Courses offered by Dublin City University
About the author
Anushree is a Graduate in Bachelor's degree in Journalism and Mass Communication and takes keen interest in content creation. She has affinity for writing and travelling around the world takes the top spot on her bucket list. Bringing out the creativ...Read Full Bio
Study in IrelandUniversities in IrelandUniversities in DublinDublin City UniversityBEng in Mechanical and Manufacturing EngineeringBEng in Mechanical and Manufacturing Engineering at Dublin City University Popular & recent articles
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
View more articles
BEng in Mechanical and Manufacturing Engineering at Dublin City University Contact Information
BEng in Mechanical and Manufacturing Engineering
at Dublin City University
Address
DCU Glasnevin Campus,
Dublin 9,
Ireland.
Dublin ( Other - Ireland)
Phone
Go to College Website ->