Engineer

Hi Prakash,
Aeronautical engineering is one of the most challenging branches of engineering. It has a wide scope of growth in the field of engineering. This field is concerned mostly with the technical as well as the mechanisms of the flying aircrafts. This is an emerging field. This field deals with the development of new technologies in aviation and defense systems. This field mainly consists of the construction, designing, working, testing, operation, maintenance of the space craft's, satellites, missiles, space vehicles, etc.,
List of top 10 institutes:
These are the top Aerospace/Aeronautical colleges in India
1.Indian Institute of Technology Bombay
2.Indian Institute of Technology Kanpur
3.Indian Institute of Technology Kharagpur
4.Indian Institute of Technology Madras
5.PEC University of Technology , Chandigarh
6. Bengal Engineering and Science University , West Bengal
7.Manipal Institute of Technology, Karnataka ,Manipal
8.Sathyabama University ,Chennai
9.Acharya Institute of Technology ,Bangalore
10.Amrita School of Engineering ,Bangalore
For admission in a bachelor's degree, you need to complete 10+2 examination with science subject such as physics, maths and chemistry. For IITs, It is mandatory to qualify in the Joint Entrance Examinations (J.E.E). The duration for this course is 4 years.
Some of the exams are:
UPSEE,
SRMEEE,
CET,
COMEDK,
KCET, ,
EAMCET,
MPPEPT,
KEAM,
GPET,
BITSAT.
etc.
Also, some engineering institutes conduct their own entrance examination for admission. Below is the link for institutes offering engineering. You can refine the list as per your branch and city preference.
https://engineering.shiksha.com/be-btech-courses-in-india-ctpg?sort=none&nl=0
For your preparation, you can join a good coaching institute as these coaching institutes will prepare you for not only engineering, but for your 12th as well.
For the list of coaching institutes, kindly refer to the below link:
https://testprep.shiksha.com/iitjee-entrance-exams-coaching-classes-in-india-categorypage-14-48-836-0-0-1-1-2-0-none-1-0#cateSearchBlock
However, there are few question which one should ask the coaching institute before enrolling. For the list of questions, refer to the below link
https://www.shiksha.com/10-most-important-questions-you-must-ask-before-joining-a-coaching-institute-article-7594-1
Click on thumbs up or mark it as the best, if you found it useful.
Wish You Luck!

Hi Asif,
As an automobile engineer, you can find employment in :
-manufacturing industries
-production plants
-service stations
-state road transport corporations
-private transport companies
-insurance companies
-motor vehicle departments
Automobile manufacturing industries such as TELCO, L&T, Ashok Leyland, Mahindra & Mahindra, Heldex India, Bajaj Auto and Gabrial employ automotive engineering graduates as Senior Production Engineer, Quality Engineer, Mechanical Design Engineer etc.
You may also join defense services of the country.
You may set up your own business venture.
You may even take up traditional teaching profession.
* As you have shown interest in automobile engineering, you may gain advance learning in the field to enhance your career opportunities. You can go for short / long term courses comprising of different levels such as designing, development or manufacturing. It depends on you where do you want to fit in.
Hope this information helps. Please feel free to revert. Click on the thumbs up or mark it as the best, if you found this useful.
Wish You Luck!

Hi Jovel,
Robotics is a field of engineering that deals with design and application of robots and the use of computer for their manipulation and processing.
It requires the application of computer integrated manufacturing, mechanical engineering, electrical engineering, biological mechanics, software engineering and the like.
Branches of Robotics engineering :
Artificial Intelligence
Computer Aided Manufacturing
Computational Geometry
Robot Motion Planning
Digital Electronics and Micro-processors
Robot Manipulators
In India there is no robotics in under graduate level, you have to go for M.tech. Only Mechanical, Electrical, Computer and Electronics engineers are eligible to pursue M.tech in Robotics.
The premier institute in Robotics is The Center for Robotics and Mechatronics at IIT (Indian Institute of Technology), Kanpur which offers a Master's Degree Course in Robotics. Admission is through valid GATE score.
The Mechanical Engineering, Electrical Engineering & Computer Science Departments of the IIT's offer courses in Computer Science with specialization in Artificial Intelligence, which is an integral part of Robotics.
Mainly following Institutes in India offers courses in Robotics :
Indian Institute of Technology Kanpur, Uttar Pradesh
National Institute of Technology, the University of Hyderabad- M.Tech in Artificial Intelligence and Robotics
Jadavpur University, Kolkata
Birla Institute of Technology and Science, Pilani
Sri Sathya Sai Institute of Higher Learning, Prasanthinilayam, Tamil Nadu- M.Tech
PSG College of Technology, Coimbatore (Tamil Nadu) Mechanical (Robotics as an elective subject)
You may contact them personally for detailed information.
For more details on Robotics and career prospects, kindly refer the link below:
https://www.shiksha.com/robotics-program-article-4610-1
Hope it helps. Please feel free to revert. Click on the thumbs up or mark it as the best, if you found this useful.
Wish You Luck!

Hi Sai Krishna Varma,
Aircraft maintenance engineering is not a degree or a diploma course, but a training programme. On completion of the training, a license is issued by the Directorate General of Civil Aviation (DGCA).
-A three-year aircraft maintenance engineering license training course is being offered by several institutes approved by the DGCA.
-You require 10+2 exam with 50 per cent marks in aggregate in physics, chemistry and mathematics or a three-year diploma course in any branch of engineering or B.Sc. degree holders after 10+2 with maths, physics and chemistry are eligible for admission to AME training courses
-Total training cost will be around Rs.1.5 lakh.
- To become an Aircraft Maintenance Engineer (AME) you need to obtain a license from the Director General of Civil Aviation (DGCA). The AME (Associate Membership Exam) certification is not a degree but a specialized licensing programme for servicing and maintenance of aircraft and only those institutes approved by the DGCA can impart training in this field to prepare you for the AME exam conducted by the Aeronautical Society of India .
-Upon clearing the internal exams (Section A & B), the DGCA will issue you an AME license, which is considered at par with a BE/BTech in aeronautical engineering from an Indian university. Age limit: 23 years (at times, the upper age limit is relaxed for engineering diploma holders in any branch of engineering (50% marks) and science graduates.
-On completing of year one (two semesters) of the three year training programme, you can take the basic Paper I of the AME License Exam, followed by Paper II at the end of the second year and Paper III on completion of the fifth semester.
- Clearing these three papers at the earliest will fetch you the Basic Aircraft Maintenance Engineer Certificate (BAMEC) from DGCA which will make you eligible for a job in the aviation industry.
-That leaves you with Paper IV in your specific area of competence, which will fetch you the coveted AME license.
Job prospects after completing Aircraft Maintenance Engineering :
- Air India, Pawan Hans, Helicopter Corporation of India and flying clubs, private airlines and government-owned air service,Hindustan Aeronautical Ltd, Defense Research and Development Laboratories, National Aeronautical Lab, Aeronautical Development Establishment,
Please refer to the link mentioned below:
https://www.shiksha.com/career-as-aircraft-maintenance-engineer-cc-9

Hi Tom,
Electronics engineers use scientific knowledge of the behaviour and effects of electrons to design, develop and test components, devices, systems or equipment that use electricity as part of their source of power. These components include capacitors, diodes, resistors and transistors.
Electronics engineers usually work in cross-functional project teams with colleagues in other branches of engineering.
Work can be found in a variety of areas as electronics are used in many things including:
acoustics;
defence;
medical instruments;
mobile phones;
nanotechnology;
radio and satellite communication;
robotics.
Subfields of electronic engineering include:
control engineering;
instrumentation;
signal processing;
telecommunications engineering.
Typical work activities
Electronics engineers work on a project through all its stages; from the initial brief for a concept, through the design and development stage, to the testing of one or more prototypes, and through to the final manufacture and implementation of a new product or system.
Exact duties vary, depending on the industry, but tasks may include:
discussing proposals with clients;
working with colleagues to design new systems, circuits and devices or develop existing technology;
testing theoretical designs;
writing specifications and technical reports;
following defined development processes;
systematically improving the detailed design of a piece of electronic equipment;
ensuring that a product will work with devices developed by others, can be made again reliably, and will perform consistently in specified operating environments;
creating user-friendly interfaces;
ensuring safety regulations are met;
project planning and preparing budgets;
attending meetings with subcontractors;
supervising technicians, craftspeople and other colleagues;
keeping up to date with developments in technologies and regulations.
The tasks carried out can vary depending on the level at which you work:
Chartered engineers (CEng) have the greatest level of responsibility for complete engineering projects. They develop solutions to problems using new or existing technologies in a strategic role.
Incorporated engineers (IEng) take responsibility for specific aspects of a project and day to day operations. They maintain and manage applications of current and developing technology.
Feel free to ask more questions. Hit like or mark it as the best answer.
All the best.

Hi Rupa,
An Internet engineer works with a company's current information system, assesses its growing needs and designs and implements new software and applications that will help the company move forward in its market. To do this, the Engineer must gain a quick understanding of what the company does, how it markets its product and how it communicates internally.
The Internet engineer must have good communication skills. He or she must be able to teach and offer support services to employees, part of this is accurately assessing the technology skills of the work force. Some people find new technology intimidating and the engineer must demonstrate the ability to explain programs with patience and clarity.
You may go for a course in .Net Technologies or Java and Oracle from any of the institutes like:
1. NIIT.
2. Aptech.
3. STG, etc.
If your finances permit you to go for career courses of three year duration like GNIIT, then that will be best.
After that you may go for a course in internet security, otherwise it will be useless. After the completion of the course you may look for better job. Moreover these institutes also provide placement assistance, which will be helpful in transiting to a better job.
Feel free to raise more questions.
Appreciate by giving it thumbs up or marking as best.
All the Best.

Some of the top universities at international level offering industrial design courses include : Virginia Polytechnic Institute and State University offering Bachelor's in Industrial Design, University of Houston offering Bachelor's degrees in Industrial and Product Design, Montclair State University offering Bachelor's degrees,Massachusetts College of Art and Design offering Bachelor's degrees in Industrial and Product Design, and Associate degrees in Graphic Design, Ferris State University offering Bachelor's degrees in Industrial and Product Design, Clemson University offering Bachelor's and master's degrees available in industrial design, Auburn University offering Bachelor's and Master's degrees in related areas and ofcourse Carnegie Mellon University through their school of design. In India few courses are available at some IITs including the one at Mumbai. There are private players as well offering certificate courses. UPES. MIT Institute of design etc are xome of the universities and institutes offering related courses.