Faculty Reviews

Overall Faculty Rating (Out of 5)

4.0

Based on 14 Verified Reviews

Distribution of Rating

The Verified badge indicates that the reviewer's details have been verified by Shiksha, and reviewers are bona fide students of this college. These reviews and ratings have been given by students. Shiksha does not endorse the same. Out of 25 published reviews, 14 reviews are verified.
Read reviews that mention
Course Curriculum DesignKnowledge SharingFaculty Easily ApproachableSupportive FacultyQuality educationIndustry ExposureTeaching ExperiencePedagogyTop FacultyCourse StructureCompulsory attendanceLive ProjectsStudent Faculty ratioPractical Focus in CurriculumLatest TechnologyView All
Very PositivePositiveNeutralNegativeVery Negative
K
Krish Prajapati | Diploma in Computer Science and Engineering - Batch of 2026
Reviewed on 7 Sep 2025
Verified
1.6
Placements 2 Infrastructure 1 Faculty & Course Curriculum 2 Crowd & Campus Life 1 Value for Money 2
About Government Polytechnic.

Faculty: Teachers are qualified and knowledgeable, but not helpful for students, and teaching quality is very poor. No, not make students ready for industry purposes. There are many difficulties faced by the students in exams because exam levels are tough and not helped by the teachers. The pass percentage of this is half.

Was this review helpful YesNo  
K
Krish Prajapati | Diploma in Computer Science and Engineering - Batch of 2026
Reviewed on 24 Aug 2025
Verified
2.0
Placements 2 Infrastructure 1 Faculty & Course Curriculum 2 Crowd & Campus Life 1 Value for Money 4
Not good for my side, according to this course because of lack of knowledge.

Faculty: Teachers are much qualified and knowledgeable. Difficult level of semester exams is tough. Passing percentage ratio is 50% because the board of these courses is BTEUP board which does not take the approximate marks.

Was this review helpful YesNo  
S
Saurav Kumar | Diploma in Mechanical Engineering (Production) - Batch of 2023
Reviewed on 31 May 2025
Verified
4.0
Placements 4 Infrastructure 4 Faculty & Course Curriculum 4 Crowd & Campus Life 3 Value for Money 5
Best college in Uttar Pradesh.

Faculty: Good faculty, always helpful, and the exam quotation for BTEUP board Bareilly is very money-friendly. Generally, lecturers are Ph.D. holders, they are fully knowledgeable and have very good teaching qualities. Students gain knowledge from the teachers and achieve very good faculty positions in industries.

Was this review helpful YesNo  
A
Abhay Pal | Diploma in Mechanical Engineering (Production) - Batch of 2026
Reviewed on 2 Jul 2025
Verified
4.4
Placements 4 Infrastructure 4 Faculty & Course Curriculum 5 Crowd & Campus Life 4 Value for Money 5
In our college, there are really good placements and good infrastructure.

Faculty: The teachers in my college are very helpful and of good quality. They are very knowledgeable and explain the topic clearly and instantly. 50-60% of students are ready for the industry. The college exams are very tough. Semester exams are conducted every 6 months, and the passing marks are 33-35%.

Was this review helpful YesNo  
G
Gaurav Singh Rath ... | Diploma in Mechanical Engineering (Production) - Batch of 2023
Reviewed on 14 Jan 2025
Verified
4.8
Placements 5 Infrastructure 5 Faculty & Course Curriculum 4 Crowd & Campus Life 5 Value for Money 5
College life to professional life.

Faculty: Teachers are helpful and cooperative. With the help of practice and practice, we are able to do work in the industrial area. A minimum of 33 percent marks are necessary to pass. With 75 percent attendance, all teachers are cooperative in solving any issues regarding studies or any issues.

Was this review helpful YesNo  
K
Kartikey Singh | Diploma in Mechanical Engineering (Production) - Batch of 2024
Reviewed on 12 Aug 2024
Verified
4.6
Placements 5 Infrastructure 4 Faculty & Course Curriculum 4 Crowd & Campus Life 5 Value for Money 5
Totally worth it if you want to take admission.

Faculty: As a mechanical student, the teachers in the Mechanical Department are very supportive and knowledgeable, especially Dr. Ashwani Sir and Arun Sir (HOD Mech.). Exams are always conducted late, around 1 month due to the BTEUP Board. The computer lab is equipped with the latest generation computer systems.

Was this review helpful YesNo  
Anonymous | Diploma in Computer Science and Engineering - Batch of 2021
Reviewed on 17 Sep 2023
Verified
2.8
Placements 1 Infrastructure 4 Faculty & Course Curriculum 3 Crowd & Campus Life 3 Value for Money 3
I am not satisfied with this college.

Faculty: Our teachers are not good. They fulfill their responsibilities without ensuring that their students comprehend the material. The pass percentage is around 60-70%. Semester exams are not always completed on schedule. If a student fails a semester exam, the teachers do not offer any assistance.

Was this review helpful YesNo  
V
Vineet Sharma | Diploma in Mechanical Engineering (Production) - Batch of 2022
Reviewed on 22 Jan 2023
Verified
4.6
Placements 5 Infrastructure 4 Faculty & Course Curriculum 5 Crowd & Campus Life 4 Value for Money 5
Very good college to get placed in a good company.

Faculty: Teachers are very helpful, qualified and knowledgeable. Also, they are very frank with students. They play cricket with us. Semester exams are not much difficult they are very easy to clear. Teachers are very good in their fields. They know about everything relevant to their subjects.

Was this review helpful YesNo  
A
Abhishek Sharma | Diploma in Mechanical Engineering (Production) - Batch of 2023
Reviewed on 7 May 2022
Verified
4.6
Placements 4 Infrastructure 5 Faculty & Course Curriculum 5 Crowd & Campus Life 4 Value for Money 5
College is best for all the students.

Faculty: All the teachers are well qualified and experienced. So they teach well to students and focus all on the development of students. Teachers focus on practical knowledge also very well because practical knowledge is very important for industrial experience.

Was this review helpful YesNo  
N
Neeraj Pandey | Diploma in Mechanical Engineering (Production) - Batch of 2018
Reviewed on 22 Apr 2022
Verified
4.4
Placements 5 Infrastructure 4 Faculty & Course Curriculum 5 Crowd & Campus Life 4 Value for Money 4
I was absolutely satisfied because of faculty and good placements in 2018.

Faculty: Teachers in our college were very helpful, knowledgeable, and qualified. Most of the lecturers were old but there was a private faculty to teach whose teaching skills were very good. Curriculum of the BTEUP board was very old. According to me, it should be changed now according to this digital world. There were semester exams conducted every six months.

Was this review helpful YesNo  
S
Sushant Deval | Diploma in Mechanical Engineering (Production) - Batch of 2019
Reviewed on 30 Oct 2021
Verified
4.2
Placements 4 Infrastructure 4 Faculty & Course Curriculum 4 Crowd & Campus Life 4 Value for Money 5
It is a good institute with excellent infrastructure.

Faculty: The teachers are very helpful and well qualified. They have the best knowledge of their streams. Their teaching skills are on point. In my point of view, this institute can provide in-depth knowledge about the industrial area, so this college makes you industry-ready. Semester exams are tough if you don't prepare well. The pass percentage is 45 or above.

Was this review helpful YesNo  
S
Saurabh kumar gupta | Diploma in Mechanical Engineering (Production) - Batch of 2018
Reviewed on 3 Aug 2021
Verified
3.8
Placements 4 Infrastructure 3 Faculty & Course Curriculum 4 Crowd & Campus Life 4 Value for Money 4
You should take admission in this college, as it provides all facilities and placements.

Faculty: The teachers are highly qualified and very helpful. They give you good knowledge. Semester exams are very tough, and cheating is not allowed.

Was this review helpful YesNo  
H
Harshit Kumar Rat ... | Diploma in Mechanical Engineering (Production) - Batch of 2022
Reviewed on 14 Mar 2021
Verified
3.2
Placements 3 Infrastructure 3 Faculty & Course Curriculum 4 Crowd & Campus Life 3 Value for Money 3
I am very much dissatisfied with the way of teaching here although it is a good college.

Faculty: There is a big problem for students who are from English medium schools as most of the teachers teach completely in Hindi language because most of the students here are from Hindi medium. So, here students of English medium have to compromise and struggle a lot in their study. Apart from that, teachers are good and helpful.

Was this review helpful YesNo  
G
Gaurav Kumar Patel | Diploma in Mechanical Engineering (Production) - Batch of 2021
Reviewed on 1 Mar 2021
Verified
4.2
Placements 4 Infrastructure 4 Faculty & Course Curriculum 5 Crowd & Campus Life 4 Value for Money 4
It is the best college for studies.

Faculty: The teaching quality is awesome. Every teacher gave their full efforts, and they are doing well. Some teachers like Dr. Ashwani Sir, Arun Sir, Aashish Sir and Javed Sir are very helpful for students, and they want their students to be good and gain knowledge.

Was this review helpful YesNo  
S
Saloni Priya | Diploma in Textile Technology - Batch of 2026
Reviewed on 12 Aug 2025
4.6
Placements 5 Infrastructure 5 Faculty & Course Curriculum 5 Crowd & Campus Life 4 Value for Money 4
Government Polytechnic College is the best technical institute in UP.

Faculty: My college teachers are very helpful and of good quality. They are very knowledgeable and explain any topic clearly. Around 50-60% of students are prepared for the industry. College exams are very tough. My semester exams are every six months. The passing marks are 33 to 35%.

Was this review helpful YesNo  

News & Updates

Latest NewsPopular News
Confused about which college or exam to opt for?
  • Chat with our counsellor
  • Get your personalised list of colleges & exams matching your preferences
qna

Student Forum

chatAnything you would want to ask experts?
Write here...

Answered a year ago

Government Polytechnic, Bareilly has been rated 4.2 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

A

Atul Mishra

Beginner-Level 1

Answered a year ago

Government Polytechnic, Bareilly has been rated 4 on placements.

A

Atul Mishra

Beginner-Level 1

Answered a year ago

Government Polytechnic, Bareilly has below criteria for taking admissions to it's various courses:
CoursesEligibility
After 10th DiplomaCandidate must have passed class 10th examination with a minimum of 35% marks from a recognised board/Institute. The minimum age is 14 years as on 1st July 2022, i.e. born on or before 01-07-2009.

A

Atul Mishra

Beginner-Level 1

Answered a year ago

Government Polytechnic, Bareilly has been rated 4.3 on Infrastructure parameter. Government Polytechnic, Bareilly has also been rated 4.5 for Campuslife.

A

Atul Mishra

Beginner-Level 1

Answered a year ago

Government Polytechnic, Bareilly offers Diploma courses including . Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Government Polytechnic, Bareilly has specializations such as After 10th Diploma specializations in Computer Science Engineering, Me

...Read more

A

Atul Mishra

Beginner-Level 1