Filter IconAll FiltersClear All
Andhra Pradesh
VLSI Design
LocationUp Arrow Icon
Search IconClose Icon
CourseUp Arrow Icon
Total FeesUp Arrow Icon
  • (28)
  • (136)
  • (3)
  • (1)
  • (2)
  • (1)
RatingUp Arrow Icon
  • (1)
  • (4)
  • (11)
SpecializationUp Arrow Icon
Search IconClose Icon
181 results

VLSI Design colleges in Andhra Pradesh

Sort By:Popularity
86 K
– / –
70 K
– / –
– / –
– / –
86 K
70 K
– / –
Q&A Icon
Commonly asked questions
On VLSI Design colleges in Andhra Pradesh
Q:   What is the fee range for the courses offered at Sai Rajeswari Institute of Technology?
A: 
The fee bracket for programs offerred by the Sai Rajeswari Institute of Technology is approximately INR 54000 - INR 172000.
Q:   What is the eligibility to get admission in Kakinada Institute Of Engineering And Technology For Women for UG/PG courses?
A: 
Kakinada Institute Of Engineering And Technology For Women has below criteria for taking admissions to it's various courses:
CoursesEligibility
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.TechCandidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
After 10th DiplomaCandidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
Q:   How can I get into Global College Of Engineering And Technology for UG/PG courses? Am I eligible for admission?
A: 
Global College Of Engineering And Technology has below criteria for taking admissions to it's various courses:
CoursesEligibility
After 10th DiplomaCandidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.TechCandidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
MBA/PGDMCandidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
Q:   Who are the top recruiters at Sai Tirumala N V R Engineering College during placements?
A: 
Sai Tirumala N V R Engineering College offers placement support to its students. Notable organizations that visit the institute for recruitment include Green Ripples Pvt Ltd, Indusnet Techshu, Linpack Technologies Pvt Ltd, National Residency, Topline Computers, 3D Logic, Fluid Metal, Terminal Contacts, Edvizo, Sk Construction.
Q:   How is the infrastructure at Sri Chundi Ranganayakulu Engineering College (SCREC)? What are the facilities available for students?
A: 
Sri Chundi Ranganayakulu Engineering College (SCREC) has been rated 4.2 on Infrastructure parameter. Institute has a well supported campus with facilities such as Auditorium, Cafeteria, Gym, Hostel, Labs, Library, Shuttle Service, Sports Complex, Wi-Fi Campus. Sri Chundi Ranganayakulu Engineering College (SCREC) has also been rated 3.7 for Campuslife.
1 L
– / –
1 L
– / –
1.14 L
– / –
86 K
– / –
1.14 L
– / –
Q&A Icon
Commonly asked questions
On VLSI Design colleges in Andhra Pradesh
Q:   How can I get into Eluru College of Engineering and Technology (ECET, Eluru) for UG/PG courses? Am I eligible for admission?
A: 
Eluru College of Engineering and Technology (ECET, Eluru) has below criteria for taking admissions to it's various courses:
CoursesEligibility
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.TechCandidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
MBA/PGDMCandidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
Q:   What is the eligibility to get admission in DJR Institute of Engineering and Technology (DJRIET) for UG/PG courses?
A: 
DJR Institute of Engineering and Technology (DJRIET) has below criteria for taking admissions to it's various courses:
CoursesEligibility
MBA/PGDMCandidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
After 10th DiplomaCandidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.TechCandidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
Q:   How can I get into Narasaraopeta Institute Of Technology for UG/PG courses? Am I eligible for admission?
A: 
Narasaraopeta Institute Of Technology has below criteria for taking admissions to it's various courses:
CoursesEligibility
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.TechCandidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
MBA/PGDMCandidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
Q:   Is VRS And YRN College of Engineering & Technology a good college/Institute?
A: 
VRS And YRN College of Engineering & Technology is a reputed institute for MCA, MBA/PGDM, After 1th Diploma, B.Tech, M.E./M.Tech. Students can opt these programs to pursue their career in IT & Software, Business & Management Studies, Engineering. Institute has trained & experienced faculty who deliver these programs. VRS And YRN College of Engineering & Technology has a review rating of 3.6 on the basis of reviews by students. In addition to this, it has been rated 3.8 on campuslife, 3.8 on placements, 3.8 on faculty and 3.5 on Infrastructure.
Q:   Which companies generally recruit from Shree Rama Educational Society Group Of Institutions?
A: 
Shree Rama Educational Society Group Of Institutions provides placement assistance to students. The Institute is visited by reputed organizations such as Indusnet Techshu, Ncord Health, Shahin Construction, Vilas Rajapkar Consultancy ( Opc ) Pvtltd, Matrix Financial Consultants, Samsung R And D Institute India Noida, Terminal Contacts, Topline Computers.
1 L
– / –
1.14 L
– / –
    – / –
1 L
– / –
1.14 L
– / –
70 K - 97 K
– / –
Q&A Icon
Commonly asked questions
On VLSI Design colleges in Andhra Pradesh
Q:   Which major specializations are available at Kandula Obul Reddy Memorial College Of Engineering?
A: 
Kandula Obul Reddy Memorial College Of Engineering offers Degree courses including 6 UG and 3 PG courses. These programs are offerred in Full Time mode. Kandula Obul Reddy Memorial College Of Engineering has specializations such as B.Tech specializations in Civil Engineering, Electrical Engineering, Computer Science Engineering, Electronics & Communication Engineering, M.E./M.Tech specializations in Computer Science Engineering, VLSI Design.
Q:   What is the fees range for courses offerred by the Intell Engineering College?
A: 
The fees range for courses offerred by the Intell Engineering College is around INR 114000 - INR 216000.
Q:   What courses are available at PBR Visvodaya Institute of Technology And Science?
A: 
PBR Visvodaya Institute of Technology And Science offers courses such as MCA, MBA/PGDM in the stream of IT & Software, Business & Management Studies.
Q:   What is the intake for offered courses at VRS and YNR College of Engineering and Technology?
A: 
The seats availability for offered courses at VRS and YNR College of Engineering and Technology goes up to 504. Courses offerred by VRS and YNR College of Engineering and Technology are approved by eminent Government bodies such as AICTE.
Q:   How is the placement facility at Swamy Vivekananda Engineering College?
A: 
As per Shiksha verified reviews, Swamy Vivekananda Engineering College has an impressive review rating of 2.96 by 19 students.
Most preferred Courses for VLSI Design
    – / –
1 L
– / –
1.14 L
– / –
1 L
– / –
1.53 L
– / –
86 K
Q&A Icon
Commonly asked questions
On VLSI Design colleges in Andhra Pradesh
Q:   How is the placement facility at Krishna Chaitanya Institute Of Technology And Sciences?
A: 
Krishna Chaitanya Institute Of Technology And Sciences has been rated 3.5 on placements.
Q:   How much is the intake across all courses being offerred at Benaiah Institute of Technology and Sciences?
A: 
The overall seats available across all courses offered by Benaiah Institute of Technology and Sciences is up to 447. Good thing to know is that Benaiah Institute of Technology and Sciences has courses which are approved by prominent Government bodies like AICTE.
Q:   How can I get into Paladugu Parvathi Devi College Of Engineering And Technology for UG/PG courses? Am I eligible for admission?
A: 
Paladugu Parvathi Devi College Of Engineering And Technology has below criteria for taking admissions to it's various courses:
CoursesEligibility
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.TechCandidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
MBA/PGDMCandidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
Q:   How can I get into Srinivasa Inst Of Technology Science for UG/PG courses? Am I eligible for admission?
A: 
Srinivasa Inst Of Technology Science has below criteria for taking admissions to it's various courses:
CoursesEligibility
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.TechCandidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
Q:   Which courses does Sri Sunflower College of Engineering and Technology offer?
A: 
Sri Sunflower College of Engineering and Technology provides programmes including B.E. / B.Tech, After 10th Diploma, M.E./M.Tech in streams such as Engineering, and are excellent for students to build their careers. The institute has specializations in Computer Science Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering, Electronics & Communication Engineering, Structural Engineering, Information Technology, VLSI Design.
View colleges in your budget of
< 1 Lakh (28)
1 - 3 Lakh (136)
3 - 5 Lakh (3)
5 - 7 Lakh (1)
7 - 10 Lakh (2)
10 - 15 Lakh (1)
1.44 L
– / –
1 L
– / –
    – / –
1.6 L
– / –
– / –
– / –
1.14 L
– / –
Q&A Icon
Commonly asked questions
On VLSI Design colleges in Andhra Pradesh
Q:   Who are the top recruiters from Gokul Institute of Technology and Sciences when it comes to placements?
A: 
Gokul Institute of Technology and Sciences has placed its selected students in known and reputed companies such as Grab India, Teerthanker Mahaveer University, 4Dimensions Retail Design, Green Ripples Pvt Ltd, Grid Inddia Power Cable Pvt Ltd, Indusnet Techshu, Linpack Technologies Pvt Ltd, Linuxbean Pvt Solution, Narhari Engineering Works Palghar, Citrus Hotel, Terminal Contacts, Deloitte And Touche Assurancr Enterprise Risk And Services India Pvt Ltd, Paramount Export House, Unilever, Fariyas Resort Lonawla Pune.
Q:   Who are the top recruiters of Sri Venkateswara Institute of Science and Technology?
A: 

Recruiters from diverse sectors took part in the campus placement drive. The top recruiters of Sri Venkateswara Institute of Science and Technology are Wipro, Tech Mahindra, Infosys, Oppo, TCS, Accenture, HCL Technologies, Yamaha Motor India and many more. Students of current batch got placed at lesser salary packages compared to previous.The highest package offered at Sri Venkateswara Institute of Science and Technology was INR 8 LPA. batches. 80% of the students got placed. Maximum package and median package offered to the recent batch  were INR 3.7 LPA and INR 2.4 LPA.

Q:   Which courses are offered by Nova's Institute Of Technology?
A: 
Nova's Institute Of Technology has courses such as B.Tech, After 1th Diploma, M.E./M.Tech which are primarily in the stream of Engineering. Nova's Institute Of Technology has specializations such as B.Tech specializations in Electrical Engineering, Civil Engineering, Computer Science Engineering, Electronics & Communication Engineering, Mechanical Engineering, Robotics Engineering, After 10th Diploma specializations in Civil Engineering, Electronics & Communication Engineering, Mechanical Engineering, M.E./M.Tech specializations in Computer Science Engineering, Structural Engineering, VLSI Design.
Q:   What is the eligibility to get admission in Swetha Institute Of Technology and Science for UG/PG courses?
A: 
Swetha Institute Of Technology and Science has below criteria for taking admissions to it's various courses:
CoursesEligibility
B.E. / B.TechCandidates who have passed Diploma in Engineering or any other examination recognized as equivalent there to, from a recognized Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.TechCandidate must have completed B.E./B.Tech. in relevant stream of engineering and technology with the above-mentioned minimum percentage (45% in case of reserved category candidates) from AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Preference will be given to candidates qualified GATE in the relevant branch based on their test scores and the remaining seats will be for candidates qualified in APPGECET as per their merit ranks
70 K
– / –
70 K - 1.14 L
– / –
– / –
– / –