M.Tech in VLSI Design colleges in Andhra Pradesh

The scholarship seats are alloted in all programmees on the basis of merit, number of seats and first come first served basis at Vignan University. The scholarship is applicable for four years of study subject to maintaining a minimum of 70% aggregate in the preceding year (s) without any backlogs.

 

JNTUA cutoff 2024 has been released for the Last Round. As per the JNTUA cutoff 2024 released for the BTech courses, the required rank should ranged between . Considering the Last Round cutoff, the required rank needed would be varied from 6855 to 136972 for getting admission at JNTUA.

Further, check out the courses available under this range for the General AI candidates as per the JNTUA Last Round cutoff 2024:

Course	2024
B.Tech. in Civil Engineering	43852
B.Tech. in Electrical and Electronics Engineering	16442.1
B.Tech. in Mechanical Engineering	33700
B.Tech. in Electronics and Communication Engineering	6855
B.Tech. in Chemical Engineering	66065
B.Tech. in Computer Science and Engineering	136972

 

Siddhartha Academy of Higher Education, Deemed to be University has not released its course wise placement statistics for 2025 placement drive. Refer to the table below to know about the overall placement highlights at Siddhartha Academy of Higher Education, Deemed to be University-

Godavari Institute of Engineering and Technology is one of the most authentic institutions for engineering that boasts an appropriate curriculum and robust infrastructure for the campus. This college runs a host of different engineering programs with experienced faculty members emphasizing practically located learning with industry relevance.

GMR Institute of Technology - GMRIT is a reputed institute for B.Tech, M.E./M.Tech. Students can opt these programs to pursue their career in Engineering. Institute has trained & experienced faculty who deliver these programs. GMR Institute of Technology - GMRIT has a review rating of 4.2 on the basis of reviews by students. In addition to this, it has been rated 4.4 on campuslife, 4 on placements, 4.1 on faculty and 4.4 on Infrastructure.

The university offers BTech, MTech, BBA, etc., courses at the UG and PG level. Students can check the table below to know some of the course-wise total tuition fee from the table presented below:

Course Name	Total Tuition Fee
BTech	INR 2 lakh-INR 11 lakh
MTech	INR 1.1 lakh-INR 2 lakh
MBA	INR 2 lakh-INR 5 lakh

This information is sourced from official website/ sanctioning body and is subject to change.

Madanapalle Institute of Technology and Science (MITS) Deemed to be University offers placement support to its students. Notable organizations that visit the institute for recruitment include Citrus Hotel, Linpack Technologies Pvt Ltd, Pinnacle Academy Of Aviation And Management Studies, Terminal Contacts, Nivika Enterprisese, Vilas Rajapkar Consultancy ( Opc ) Pvtltd, Topline Computers, Eprofess, Astamed Healthcare, Clixlogix Technologies Pvt Ltd, Linuxbean Pvt Solution, Healthsignz Pvt Limited, Globetele Services, Edvizo, Genaaue Engineering, Zone By The Park, K Nagaprathyusha, Grayquest Education Finance Private Limited, Deloitte And Touche Assurancr Enterprise Risk And Services India Pvt Ltd.

Yes, Aditya Institute of Technology and Management offers scholarships mainly under three categories. Under the scholarship schemes, college grants financial assistance to meritorious students. The scholarships are as follows:

• AICTE Scholarship scheme
• Swanath Scholarship schemes for students
• AICTE - Post Graduate (PG) Scholarship

Vignan's Institute of Information Technology is generally rated as a Tier 2 institution. It is well known for its academic standard and has also won several great rankings, one being NIRF's ranking for engineering 2024 at #201-300 and the Times ranking, 79th in 2023. These rankings point towards some good reputation but certainly do not establish it among the elite tier-1, a set of established universities that includes IITs and NITs. VIIT has focused programs and average placement rates, which has made it a very competitive choice within its tier.

 

Sri Venkateswara College of Engineering, Tirupati has been rated 4.1 on placements on the basis of 389 reviews done by students.

Sri Venkateswara College of Engineering and Technology offers admission to the two-year M.Tech course is through GATE/AP PGECET. The degree is offered in affiliation with Jawaharlal Nehru Technological University, Ananthapuramu. This course is offered across five specilisations. These are Data Science, Structural Engineering, Power Electronics and Electrical Drives, CSE, CAD/CAM, VLSI Design.

Rajeev Gandhi Memorial College of Engineering and Technology is a well-known institution for B.E. / B.Tech, M.E./M.Tech, MBA/PGDM, MCA courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Rajeev Gandhi Memorial College of Engineering and Technology has a rating of 3.79 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.85 on Campus Life, 3.54 on Placements, 3.85 on Faculty and 3.98 on Infrastructure.

As per Shiksha verified reviews, QIS College of Engineering & Technology has an impressive review rating of 3.58 by 181 students.

The required minimal score is 55%. A minimum of fifty-five per cent of marks in a B.E./B.Tech (Chemical Engg./Leather Technology/Bio-Tech./Industrial Bio-Tech./Bio-Chemical Engg./Bio-Informatics) or B.Pharm. Or M.Sc.(Ag.)/M.V.Sc./M.Sc. In any discipline of Life Sciences is needed for admission to the M.Tech. Bio-Technology application.

A GATE or PGECET scorecard is needed for admission to KL University's M.Tech application. For others, the university administers a front exam, with admission based on the merit rank of certified candidates.

In addition contact your college seniors for accurate information

It's really a good experience being here I would say. You will experience the beautiful college life especially with your friends, campus, hostel life. The infrastructure is so good with placements as well. The faculty is also so friendly (interactive). You will learn more about tech life and student's life would be in engineering.

To get admission to BTech course at RVR and JC, students must pass the Andhra Pradesh EAMCET exam. Candidates willing to secure admission to the BTech course need to acquire a cutoff between 4947 and 78641 under General AI quota. Further, 7000 rank is a decent rank to get admission. Candidates can find out below the course available under this rank:

Course	2024
B.Tech. in Civil Engineering	78641
B.Tech. in Mechanical Engineering	60982
B.Tech. in Electronics and Communication Engineering	11128
B.Tech. in Electrical and Electronics Engineering	44199
B.Tech. in Information Technology	13885
B.Tech. in Chemical Engineering	56998
B.Tech. in Computer Science and Business Systems	12116
B.Tech. in Computer Science & Engineering (IoT)	12440
B.Tech. in Computer Science & Engineering (Data Science)	8751

 

The fees range for courses offerred by the Narasaraopeta Engineering College INR INR 295,200 under convener quota (Admission through EAPCET based rank) for BTech , For MBA and MCA admissions are based on I-CET entrance ranks and for MTech, it is based on PG CET Entrance ranks.  For MBA the fee is INR 50,400, MCA -INR 56,600 and MTech - INR 51300.

No, you can't get direct admission to Aditya Engineering College.

The basic eligibility criteria for admission is passing class 12 with a minimum of 50% marks in Physics, Chemistry, and Mathematics taken together.

Candidates are selected on the basis of marks obtained in the state-level engineering exam (AP EAMCET).