Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi, Alwar

4.0 /5

(11 Reviews)

Public/Government Institute

Diploma in Tool and Die Making

Table of contents

Overview
Fees
Student Reviews
Entry Requirements
Admission Process

Diploma in Tool and Die Making
at
MSME Technology Centre, Bhiwadi
Overview

At MSME Technology Centre, Bhiwadi, After 10th Diploma is offered across various specialisations, including Diploma in Tool and Die Making. This course is a After 10th level course. Moreover, it is offered for a duration of 3 years. The total seat intake is 60. Students interested in knowing about the other specialisations can visit the MSME Technology Centre, Bhiwadi After 10th Diploma page. Also, check out the below table to know other key highlights about Diploma in Tool and Die Making offered by MSME Technology Centre, Bhiwadi:

Total Tuition Fees	₹66,000 Get Fees details
Duration	3 years
Course Level	After 10th Diploma
Mode of Course	Full Time
Official Website	Go to Website
Seat breakup	60
Type of University	Public/Government

Diploma in Tool and Die Making
at
MSME Technology Centre, Bhiwadi
Fees

The MSME Technology Centre, Bhiwadi Diploma in Tool and Die Making fee is inclusive of components such as Tuition Fees, One-Time Fees, Registration Fees, Exam Fees, and others. Also, candidates may be required to pay extra fees that are specific to the institution. The total tuition fee for the Diploma in Tool and Die Making program at MSME Technology Centre, Bhiwadi is INR 66,000. More information on the MSME Technology Centre, Bhiwadi Diploma in Tool and Die Making fee is as follows:

Fee components	Amount (3 years)
Tuition Fees The above mentioned fees is as per DTE Rajasthan. Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary.	₹ 66,000
Hostel Fees The above mentioned fee is for 3 seater room. It does not include Caution money 2000 Mess charges 1000 General fund 500 Maintenance charges 800	₹ 1,800
One-time Payment The above mentioned fee includes Caution money	₹ 7,500
Total fee	₹ 75,300

These are based on information available on various sources. Latest values may differ.

Diploma in Tool and Die Making
at
MSME Technology Centre, Bhiwadi

Frequently Asked Questions

Diploma in Tool and Die Making
at
MSME Technology Centre, Bhiwadi
Students Ratings & Reviews

4/5

11 Verified Reviews Info Icon

4-5
7
3-4
3
1-2
1

Placements4

Infrastructure3.8

Faculty & Course4.3

Campus Life3.5

Value for Money4.5

Sandeep kumar Verified Icon

Diploma in Tool and Die Making - Batch of 2023

4.2

4Placements3Infrastructure5Faculty4Crowd & Campus Life5Value for Money

Good college for practical knowledge.

Placements: Placement opportunities at MSME Technology Centre, Bhiwadi are excellent. The highest package offered is almost 2.5 Lacs per annum, and the lowest package is 1.5 Lacs per annum. Companies like Tata Motors, Baxy, and Lenskart hire our graduates. About 90% to 95% of our students get internships. The top role offered is tool design and manufacturing.

Infrastructure: Our college has the facilities required for both practical and theoretical classes. For theory classes, we have air-conditioned classrooms equipped with projectors, PCs, and whiteboards. For practical classes, we have a computer lab, machine workshops, and a simulation lab. Hostels are available for outstation boys and girls.

Faculty: The course curriculum is relevant, and we get trained on all design software like AutoCAD, SolidWorks, and Mastercam that are required in the industry. For the manufacturing industry, all machines and operations are done in college. The teachers are knowledgeable and have industry experience.

Other: I chose this college for their facilities and education. The hostel food and facilities should be better.

Reviewed on 24 Oct 2024Read More

Anonymous

Diploma in Tool and Die Making - Batch of 2026

4.2

4Placements4Infrastructure5Faculty3Crowd & Campus Life5Value for Money

Good infrastructure and facilities available.

Placements: Almost 80 to 90% of students get placement in different companies. Tata Motors, JCB, Lenskart, Maruti Suzuki are the recruiting companies for placements. The highest package is 4 LPA and the lowest package offered by companies is 15 LPA.

Infrastructure: The college has three main blocks. One is the admin block, the second is the training block where classes are located, and the third is the production block where the production of different items is held by the production team. Infrastructure of the college is good. Hostel and canteen facilities are also available.

Faculty: The curriculum of the course is very relevant. For tool and die making students, tool design, die assembly, software like AutoCAD, SolidWorks, NX, Mastercam are important. Here you gain knowledge of all these points. One important thing is practical. You get here 70% practical and 30% theory which makes you ready for the industries. Semester exams are not difficult. Pass percentage is 70-80%.

Other: The best thing about our course is you do more practical than theory. Practical knowledge makes you ready for the industry.

Reviewed on 10 Feb 2024Read More

Anonymous

Diploma in Tool and Die Making - Batch of 2024

4.6

4Placements4Infrastructure5Faculty5Crowd & Campus Life5Value for Money

College has good infrastructure and facilities.

Placements: Top roles offered in our course are design of jigs and fixtures, design of moulds, design of press tools, cnc programming. Almost 80-90% students gets internships from our course in 4th year. Top recruiting company are Tata motors, Maruti Suzuki, Lenskart etc. The highest package is of 350000 per annum and the lowest package is of 150000 per annum.

Infrastructure: The college has very good infrastructure and facilities. The college have Hostel and canteen facilities for outstation students. Hostel are available for both boys and girls separately. Classrooms are available with Wi-Fi, projector and air conditioning. Computer labs and cnc labs are also available.

Faculty: Experienced teachers are available in college. They are well qualified and knowledgeable. The semester exams are not difficult. Pass percentage is of almost 70-80%. The course curriculum is also relevant. Tool design and die assembly are main work in tool industry that we study in college.

Other: The college is located in RIICO Industrial area. Main bus stand is almost 10km away.

Reviewed on 10 Feb 2024Read More

Anonymous

Diploma in Tool and Die Making - Batch of 2025

4.2

4Placements4Infrastructure4Faculty4Crowd & Campus Life5Value for Money

Satisfied because of faculty and good placement in 2019-2020 batch.

Placements: Top recruiting company are Lenskart, continental engine, Tata motors, Baxy pvt ltd. , Pvt Ltd. 80-90% students get internships from our course in above mentioned companies. Top roles offered in our course are cnc programming, tools and die making and design of various tools.

Infrastructure: The college have four main blocks. One is admin block and other are Training block in which our classes are located. Other is production block in which there are various machines like 5-axis cnc machines, cnc wire cut machines, coordinated measuring machines etc.

Faculty: Semester exams are not so difficult. Almost 50-60% students get pass in semester exam easily. Other remaining students are fails in only 1-2 subjects. The teachers are very helpful and qualified. Our course curriculum is also relevant. We here learn all the things that are useful for work in a industry.

Other: In extracurricular activities, college visits different industry by which we can learn how big industry are works. How products can be made from raw materials.

Reviewed on 29 Jan 2024Read More

Anonymous

Diploma in Tool and Die Making - Batch of 2023

5Placements4Infrastructure4Faculty3Crowd & Campus Life4Value for Money

Best college for Diploma students as they get more practical knowledge.

Placements: Almost 70-80% of students get placements in many industries from our college. The highest package given by Tata Mobility is 3.6 LPA, and the lowest package is 1.5 LPA. Tata Motors, JCB, Baxy, Lenskart, Continental Engine are the top recruiting companies for our course.

Infrastructure: All facilities that are required for diploma students as well as degree students are available in our college. Like computer lab for design software and CNC simulation lab for CNC programming and machining practice. Classrooms with Wi-Fi and projector facilities are available. Hostel and canteen facilities are also available.

Faculty: Yes, the teachers are very helpful, well-qualified, and knowledgeable. Experienced faculty members are available for teaching. The semester exams are not so difficult. The pass percentage is almost 60-70% every semester. The course curriculum is also relevant. This course makes students ready for the industry.

Other: I want to choose this course because I want to gain practical knowledge, not only theoretical knowledge. This is the best college for both practical and theoretical knowledge.

Reviewed on 25 Jan 2024Read More

View All 11 Reviews

Diploma in Tool and Die Making
at
MSME Technology Centre, Bhiwadi

Students also asked

Download exam sample paper

Diploma in Tool and Die Making
at
MSME Technology Centre, Bhiwadi
Entry Requirements

Requirements for 12th grade Up Arrow Icon

N/A
Candidate passed 10th/equivalent from any recognized institute/board are eligible to apply.

RBSE 10th

CBSE 10th

ICSE

Other eligibility criteria Up Arrow Icon

Candidate must have passed class 10th examination or its equivalent with Science and Mathematics subjects and secured at least 35% marks from a recognized board.