Automobile Engineering colleges in Uttar Pradesh

SET is a national-level entrance exam conducted for admission to various undergraduate courses. SET 2026 will be conducted in the computer-based test mode. The difficulty level of the SET exam is usually easy to moderate. But, a few questions might trick your mind and can be time-consuming.

General Knowledge and Analytical and Logical Reasoning are easier than the Quantitative Aptitude section. In 2025, according to the students who appeared for the SET session 1 exam, the SET exam was moderate. The General English section was the easiest of all four sections. The Quantitative Aptitude section was the toughest, and the other two sections were moderate to easy. The overall difficulty level of the SET question paper was moderate. Students who appeared for the SET 2025 session 2 exam said that the overall difficulty level was easy. Again, the General English section was the easiest. In this session, the Analytical and Logical Reasoning section was also easy to moderate. The Quant section was easy to moderate, and the General Knowledge section was difficult.

Amity University Greater Noida offers more than 50 courses. Check below the fee for top Amity Greater Noida courses:

Course Name	Total Tuition Fee
BTech	INR 6.64 Lacs - INR 10.24 lakh
MBA	INR 8.23 Lacs - INR 8.34 lakh
BCA	INR 4.20 lakh
MCA	INR 3.30 lakh
BBA	INR 2.40 Lacs - INR 6.81 lakh

Shri Siddhi Vinayak Group of Institutions is one of the well-known colleges in Bareilly to offer quality education to students at the UG and PG levels. SSVGI Bareilly courses are offered to students at the UG, PG, and Diploma levels, mainly in streams such as Engineering, Management, Nursing, Medicine & Health Sciences, Pharmacy, and many more. In addition to this, the college provides students with the opportunity to learn from skilled and experienced faculty members who specialise in the respective fields. 

Some medical field which offer best work and life balance are shown below -

• Dentistry (BDS & MDS) – Fixed clinic hours, fewer emergencies.

• Pharmacy (BPharm & MPharm) – Less stress compared to hospital-based jobs.

• Physiotherapy (BPT & MPT) – Flexible working hours, minimal emergency calls.

• Public Health & Community Medicine – Focus on preventive healthcare rather than emergency treatments.

• Clinical Research & Medical Writing – Research-based work with no direct patient responsibilities.

Institute of Technology and Management, Lucknow has been rated 3.3 on Infrastructure parameter. Institute of Technology and Management, Lucknow provide good facilities all around the campus such as Boys Hostel, Girls Hostel, Hospital / Medical Facilities, Hostel, Labs, Library, Sports Complex. Institute of Technology and Management, Lucknow has also been rated 3.9 for Campuslife.

Axis Colleges has been rated 3.9 on Infrastructure parameter. Axis Colleges provide good facilities all around the campus such as Auditorium, Boys Hostel, Cafeteria, Girls Hostel, Gym, Hospital / Medical Facilities, Hostel, Labs, Library, Shuttle Service, Sports Complex, Wi-Fi Campus. Axis Colleges has also been rated 3.9 for Campuslife.

SHEAT College of Engineering has below criteria for taking admissions to it's various courses:

Courses	Eligibility
MBA/PGDM	Candidates are also eligible for admission on Direct Admission Basis.
After 10th Diploma	Candidate must have passed class 10th examination with a minimum of 35% marks from a recognised board/Institute. The minimum age is 14 years as on 1st July 2022, i.e. born on or before 01-07-2009.
BCA	Candidate must have completed 10+2 with mandatory subjects from a recognised board.

XAT 2026 registration process began from July 10, 2025. Official announcement of commencement of XAT registration process 2026 has been made by XLRI at its website. Interested candidates have to register for XAT 2026 by creating a login ID at xatonline.in website. The XAT application fee will be INR 2200. Candidates will have to pay the fee to submit the XAT application form.

Government Polytechnic College, Kanpur offers various courses like PG Diploma, After 10th Diploma in Accounting & Commerce, Science, Business & Management Studies, Engineering, Design stream. Government Polytechnic College, Kanpur has specializations such as Computer Science, Sales & Marketing, Web Design, Retail, Chemical Engineering, Civil Engineering, Electrical Engineering, Electronics Engineering, Information Technology, Instrumentation Technology, Automobile Engineering, Production Engineering, Textile Engineering.

The seats availability for offered courses at Hindustan College of Science and Technology - HCST goes up to 516. Courses offerred by Hindustan College of Science and Technology - HCST are approved by eminent Government bodies such as AICTE.

JP Institute of Engineering and Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have passed Diploma in relevant stream from a recognised Institute.
After 10th Diploma	Candidate must have passed class 10th examination with a minimum of 35% marks from a recognised board/Institute. The minimum age is 14 years as on 1st July 2022, i.e. born on or before 01-07-2009.

The seats availability for offered courses at G.C.R.G. Group of Institutions goes up to 1566. Courses offerred by G.C.R.G. Group of Institutions are approved by eminent Government bodies such as INC, AICTE, PCI.

HRIT University conducts HRIT HNAT Test to shortlist candidates for admission. The university also accepts scores in GPAT, UGAT, PG Admission Test conducted by AKTU, etc. for specific programmes. Hence, admission to most of the courses is entrance-based.

The seats availability for offered courses at Delhi Institute of Engineering and Technology goes up to 810. Courses offerred by Delhi Institute of Engineering and Technology are approved by eminent Government bodies such as AICTE.

According to Shiksha verified reviews, for the faculty Institute of Technology Management, Aligarh (ITM Aligarh) have rating of 4.43. It represents that Institute has good, qualified and experienced faculty members.

Government Polytechnic College, Ghaziabad have rating of 3.75 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

B.S.A. College of Engineering and Technology has been rated 3.9 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Karnataka State Open University, Lucknow has below criteria for taking admissions to it's various courses:

Courses	Eligibility
UG Diploma	Candidate must have passed 10+2 from a recognized board.
M.Sc.	Candidate must be a graduate from a recognized college /university.
B.E. / B.Tech	Candidate must have passed 10+2 from a recognized board.
B.A.	Candidate must have passed 10+2 or equivalent examination from a recognized school/board.
B.Com	Candidate must have passed 10+2 or equivalent examination from a recognized school/board.
B.Lib.I.Sc.	Candidate must have passed graduation from a recognized University/Institute.
B.Sc.	Candidate must have passed 10+2 or equivalent examination from a recognized school/board.
BBA	Candidate must have passed 10+2 or equivalent examination from a recognized school/board.
BCA	Candidate must have passed 10+2 or equivalent examination from a recognized school/board.

DEI Technical College has a Faculty review rating of 4.25 by students. This represents that Institute has decent, qualified and experienced faculty members.

In order to get admission at IIMT Studies Ghaziabad candidates must keep certain documents ready. Student can check the list of documents below:

• Scanned Class 10, Class 12 and graduation marksheet
• Leaving Certificate
• Aadhaar Card
• Passport-size photograph
• Signature

Note: The list of documents mentioned above are the general documents. For more details visit the official website.

S. D. College of Engineering and Technology is a good institution for B.E. / B.Tech, After 10th Diploma, M.E./M.Tech, MBA/PGDM courses, and these programs are delivered by highly experienced faculty. Major specialisation at S. D. College of Engineering and Technology are Chemical Engineering, Civil Engineering, Automobile Engineering, Computer Science Engineering, Electrical Engineering, Production Engineering, Electronics & Communication Engineering, Information Technology, Mechanical Engineering, Biotechnology Engineering.

Some medical field which offer best work and life balance are shown below -

• Dentistry (BDS & MDS) – Fixed clinic hours, fewer emergencies.

• Pharmacy (BPharm & MPharm) – Less stress compared to hospital-based jobs.

• Physiotherapy (BPT & MPT) – Flexible working hours, minimal emergency calls.

• Public Health & Community Medicine – Focus on preventive healthcare rather than emergency treatments.

• Clinical Research & Medical Writing – Research-based work with no direct patient responsibilities.

Some medical field which offer best work and life balance are shown below -

• Dentistry (BDS & MDS) – Fixed clinic hours, fewer emergencies.

• Pharmacy (BPharm & MPharm) – Less stress compared to hospital-based jobs.

• Physiotherapy (BPT & MPT) – Flexible working hours, minimal emergency calls.

• Public Health & Community Medicine – Focus on preventive healthcare rather than emergency treatments.

• Clinical Research & Medical Writing – Research-based work with no direct patient responsibilities.

With the online application mode, students can apply for admissions from anywhere in India. IIMT Studies Noida conducts the application process in the online mode. Students meeting the eligibility requirements need to fill out the form available on the institute's website. For any query, aspirants can also fill out the enquiry form on IIMT's website. Below are the steps to apply for IIMT Studies Noida admissions:

Step 1: Visit the official website of IIMT Studies Noida.

Step 2: Click on 'Apply Now' on the Home page.

Step 3: Click on the course of choice and fill out the details under 'Apply Now' section.

Step 4: Admission team will then contact the candidates with the further process.