Electronics & Communication Engineering colleges in Andhra Pradesh

As per information available, V.R. Institute of Post Graduate Studies has recorded (aprx) INR 360,000 median salary to students for B.E. / B.Tech course during placements.

Candidates after appearing for the accepted entrance exam need to fill out the enquiry form on the official website of Raghu Engineering College. Aspirants can also directly reach out to the college for the form. Below are the steps to apply online:

Step 1: Visit the official website of Raghu Engineering College.

Step 2: Click on 'Apply Now' on the Home page.

Step 3: Fill out the enquiry form.

Step 4: Someone from the admission team then reaches out to the candidates for further steps.

Pragati Engineering College is committed to maintaining a ragging-free and safe campus environment for its students. The institution has established an Anti-Ragging Committee to prevent and address any instances of ragging. This committee comprises senior faculty members and department heads who are responsible for monitoring and ensuring student safety.

Most of the areas of the academic blocks, hostels and mess are under 24/7 camera surveillance. The college has taken several measures to ensure safe campus for the students. Violations of the strict measures may result in disciplinary actions, including warnings, suspension, or expulsion, following established procedures to ensure fairness and due process.

G. Pulla Reddy Engineering College has been rated 4.36 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

The total programme fee for the BTech Computer Science and Engineering course is given below:

Yes, the Centurion University of Technology and Management is approved by UGC (University Grants Commission) and by the ITOT (Institute for Training of Trainers) of the Director General of Employment and the Training (DGET), Ministry of Skill Development, GOI. The university is accredited with A Grade by NAAC, Ministry of HRD. The university is also approved by the AICTE (All India Council for Technical Education).

The seats availability for offered courses at Sasi Institute of Technology and Engineering goes up to 1275. Courses offerred by Sasi Institute of Technology and Engineering are approved by eminent Government bodies such as AICTE.

Cut-off for Sri Padmavati Mahila Visvavidyalayam will release course-wise. Generally, the entrance exam test results are announced, and only after that, the university will release the cut-off.

Siddharth Institute of Engineering and Technology (SIETK) has been rated 4 on Infrastructure parameter. Institute has a well supported campus with facilities such as Auditorium, Cafeteria, Gym, Hostel, Labs, Library, Shuttle Service, Sports Complex. Siddharth Institute of Engineering and Technology (SIETK) has also been rated 4.3 for Campuslife.

On the basis of their fees, placements, cutoffs, reviews, seats, courses, and other information, compare the University College of Engineering, Kakinada B.Tech. in Computer Science and Engineering course with the JNTUA College of Engineering, Pulivendula B.Tech. in Computer Science and Engineering course. 72 real, confirmed students have rated the University College of Engineering, Kakinada B.Tech. in Computer Science and Engineering course 3.8 out of 5, whereas 8 students in Shiksha have rated the same course at JNTUA College of Engineering, Pulivendula 4.0 out of 5. Visit Shiksha to compare all course aspects in depth and get free information on eligibility requirements, placement report, admission data, and other topics related to B.Tech admissions.

JNTUA College of Engineering, Pulivendula has been rated 3.5 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

According to Shiksha verified reviews, for the faculty Annamacharya Institute of Technology and Sciences have rating of 3.95. It represents that Institute has good, qualified and experienced faculty members.

Bapatla Engineering College, Bapatla Education Society is a well-known institution for B.E./B.Tech, MCA, UG Diploma, M.Sc, M.E./M.Tech, After 10th Diploma courses. As per the Times ranking 2023, Bapatla Engineering College, Bapatla Education Society got the #169 rank in the 'Engineering' category.

These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Bapatla Engineering College, Bapatla Education Society has a rating of 4.12 based on Shiksha-verified reviews by students. Not just this, it has also been rated 4.38 on Campus Life, 3.57 on Placements, 4.24 on Faculty and 4.41 on Infrastructure.

 

Andhra Polytechnic College have rating of 4.41 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Gayatri Vidya Parishad College for Degree and PG Courses has been rated 4.2 on placements on the basis of 144 reviews done by students.

The following is a list of a few top companies who were a part of the recent placement drive at KITS College Guntur:

KITS College Top Recruiters
Riotech Software	Deloitte	Flipkart
Wallmart	BNY Mellon	DeltaX
Amazon	TCS	Hexaware
HCL Tech	Pilog	Cisco

The fees range for courses offerred by the Sir C R Reddy College of Engineering is around INR 70000 - INR 225280.

JNTUA College of Engineering, Kalikiri has been rated 4.1 on Infrastructure parameter. JNTUA College of Engineering, Kalikiri has also been rated 4 for Campuslife.

Gudlavalleru Engineering College has been rated 4.3 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Dhanekula Inst Of Engineering Technology has been rated 4 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

S.V.Government Polytechnic College have rating of 4.18 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Aditya College of Engineering has been rated 3.9 on placements on the basis of 181 reviews done by students. In Aditya College of Engineering, 602 students were admitted in year 2015-16, out of which 401 graduated in 2018-19. From this, 190 qualified students got placed with a median salary of INR 300000 and 56 students got selected for higher studies. In year 2016-17, 392 students were admitted, out of which 329 graduated in 2019-20. From this, 180 qualified students got placed with a median salary of INR 300000 and 65 students got selected for higher studies. In year 2017-18, 409 students were admitted, out of which 288 graduated in 2020-21. From this, 207 qualified students got placed with a median salary of INR 380000 and 33 students got selected for higher studies.

According to Shiksha verified reviews, for the faculty KIET have rating of 3.51. It represents that Institute has good, qualified and experienced faculty members.

Andhra Loyola Institute of Engineering and Technology has been rated 3.8 on Infrastructure parameter. Andhra Loyola Institute of Engineering and Technology offers good infrastructure such as Auditorium, Boys Hostel, Cafeteria, Co-ed Hostel, Girls Hostel, Labs, Library, Sports Complex to students. Andhra Loyola Institute of Engineering and Technology has also been rated 3.7 for Campuslife.

Vikas College of Engineering and Technology offers Degree and Diploma courses including 9 UG and 8 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Vikas College of Engineering and Technology has specializations such as UG Diploma specializations in Civil Engineering, After 10th Diploma specializations in Civil Engineering, Electrical Engineering, Mechanical Engineering, M.E./M.Tech specializations in Computer Science Engineering, Electronics Engineering, Power Engineering, Structural Engineering, B.Tech specializations in Agriculture & Farm Engineering, Civil Engineering, Electrical Engineering, Computer Science Engineering, Mechanical Engineering, Electronics & Communication Engineering, Artificial Intelligence & Machine Learning.