Exam

Electrical syllabus for the ISRO scientist:
1- Electric circuits: Network elements, V and I sources, dependent sources, Network methods, theorems, transient response of dc and ac networks, sinusoidal steady-state analysis, resonance, 2-port networks, balanced 3-phase circuits, star-delta transformation, complex power.
2- Signals and Systems
Continuous and discrete time signal representation, shifting & scaling properties, linear time invariance, causal systems Fourier series representation, sampling theorem, applications of the Fourier transform, the Laplace transform, Z transform, R.M.S. value, average value calculation for any general periodic waveform.
3- Electrical Machines
Single-phase and 3-phase transformers, auto-transformers, electromechanical energy conversion principles; DC machines, speed control of DC motors, 3-phase induction machines, equivalent circuits, starting, and speed control, operating principles of single-phase induction motors; Synchronous machines: cylindrical & salient pole machines; regulation and parallel operation of generators; starting of synchronous motors.
4- Power Systems
Basic electrical power generation concepts, alternating current, and direct current transmission concepts Models and performance of transmission lines and cables, Economic load dispatch, series & shunt compensation, Electric field distribution & insulators, Distribution systems, Per-unit quantities, bus admittance matrix, Gauss-Seidel, and Newton-Raphson load flow methods, V and F Control, Power Factor Correction, Symmetrical components, Principles of over-current, differential, directional, and distance protection; circuit breakers, System stability concepts, equal area criterion.
5- Control Systems
Modeling and representation of systems, Feedback, TF, Block diagrams, signal flow graphs, Transient and steady-state analysis of LTI systems, Routh-Hurwitz and Nyquist criteria, Bode plots, root loci, lag, lead, & lead-lag compensators; P, PI, PID controllers; Solution of state equations of LTI systems.
6- Electrical and electronic measurements
7- Analog & Digital Electronics.
8- Power Electronics.
9- Electromagnetic Field: Coulombs Law, Electric Field Intensity, Electric Flux Density, Gauss Law, Divergence, Electric Field, & Potential Due to Point, Line, Plane, & Spherical Charge Distributions, Capacitance of Simple Configurations, Biot-Savarts law, Amperes law, Curl, Faraday's law, Lorentz force, Inductance, etc.

The Bhabha Atomic Research Centre (BARC) has a two-stage process exam.
1- Written Exam: GATE/ BARC online exam.
2- Interview. Preparation strategy for Written exam: No special strategy just try to prepare for the Graduate Aptitude Test in Engineering Exam, thoroughly. If you do well in the Graduate Aptitude Test in Engineering, Bhabha Atomic Research Centre will become one of the options among many, GATE scores are going to offer you. If you don't perform well in the Graduate Aptitude Test in Engineering, then you have to prepare for the online exam. For this just solve Engineering Services Examination (ESE's) previous questions, from the GATE syllabus. Practice and try to answer each question in Less than a minute because you have only 3 hours to solve 100 questions. Preparation strategy for the Interview:
For the Interview, you just need to study five subjects of your Choice. Make sure Power systems are present and Machines. Try to prepare each subject from a standard textbook. Also, focus on the basics concept and analysis part. For the Interview, the numerical part is not needed. Power Systems by CL Wadhwa. Machines by Nagrath and Kothari
Power Electronics by PS Bimbhra. You can also try the NPTEL lectures or youtube videos for the above subjects. I hope this will help you.

The SET is conducted for admission to undergraduate courses at Symbiosis. To prepare for this exam, you can follow these expert tips:
1. You can prepare for this exam in six months with 5 to 6 hours of study.
2. In the initial two months, focus on covering the syllabus of SET.
3. You can start studying section-wise as per exam requirements.
4. This time, focus on your foundational concepts in quantitative and English topics.
5. You need to regularly read the newspaper for English as well as Current Affairs.
6. For next month, you can start preparing notes on important SET topics.
7. By the fourth month, you should be able to begin practicing sections-wise.
8. Beginning in the fifth month, you can begin giving mock tests with a one-hour time limit to increase speed.
9. You have to attempt 60 questions in one month; therefore, you need to allot the last month to practice and revision to improve your score in each section.

First of all, I would congratulate you for getting a good rank in JEE Mains. Well, there seems to be a slight miss-match with the general trend of ratio between OBC Rank 1338 to General Rank 48k but According to your data if the OBC Rank 1338 You can get top branches like CSE, ECE, EEE in top 7 NITs like VNIT, NITC, NITW, NITRKL, NITK or MNIT which is a very good thing! Whereas it might be slightly difficult to get CSE branch in NIT-Trichy as CSE branch in NIT-Trichy has the highest cutoff amongst all NITs but you can still aim for CSE Branch in any of these 7 NITs (except for NIT-Trichy). Now talking about IITs, you need to provide your JEE Advanced Rank as JEE Mains Score cannot give you admission to IITs. So with this rank, You have very high chances of getting all top branches like CSE, ECE or EEE in top NITs. Good Luck for your Counselling!

Hello dear, Any graduate can apply for UPSC CSE examination. UPSC is India's central agency which conducts exams like Civil Services Exam (CSE) to recruit candidates into top government services like IAS IPS, IFS, etc. UPSC recruits candidates to both civil services as well as defense services. UPSC Civil Services Exam Age Limit: The candidate must be a minimum of 21 years of age and must not be more than 32 years of age. General Category & EWS: 32 years; 6 attempts. OBC (with Certificate 32 years + 3 years; 9 attempts. SC/ST: 32 years + 5 years; unlimited attempts. UPSC exam is conducted in 3 modes - pre, Mains and interview. All those candidates who want to prepare and qualify can download LK ACADEMY learning app for more details, guidance and complete preparation with lectures, doubt sessions, daily and full mock tests and study material.

Hello dear, UPSC is India's central agency which conducts exams like Civil Services Exam (CSE) to recruit candidates into top government services like IAS IPS, IFS, etc. UPSC recruits candidates to both civil services as well as defense services. UPSC Civil Services Exam Age Limit: The candidate must be a minimum of 21 years of age and must not be more than 32 years of age. General Category & EWS: 32 years; 6 attempts. OBC (with Certificate 32 years + 3 years; 9 attempts. SC/ST: 32 years + 5 years; unlimited attempts. UPSC exam is conducted in 3 modes - pre, Mains and interview. All those candidates who want to prepare and qualify can download LK ACADEMY learning app for more details, guidance and complete preparation with lectures, doubt sessions, daily and full mock tests and study material.

First of all, I would really congratulate you for getting a good rank in JEE Mains. With this good rank, You can easily get top branches like CSE, ECE, EEE in decent NITs like MNIT, MNNIT, NIT-KKR, SVNIT. Even you are able to secure decent branches like Mechanical or Chemical in Top 7 NITs!
If you appear for CSAB Rounds, then you also have good enough chances to get top branches like ECE and EEE in Top NITs like VNIT, NITC, NITW, NITRKL or even NIT-Trichy in case if there are seats available in these branches!
So with this rank, You have a huge scope of getting all top branches like CSE, ECE or EEE and even you can get top branches in top NITs and IIITs with this rank. Good Luck for your Counselling!