Diploma in Tool Die and Mould Making
at Central Institute of Tool Design, Bala Nagar

4.3 /5

(3 Reviews)

Public/Government Institute
Estd. 1968

Diploma in Tool Die and Mould Making
at
Central Institute of Tool Design
Overview

Central Institute of Tool Design offers Diploma in Tool Die and Mould Making at After 10th level. The duration of the course is 3 years. To confirm their admission into the college, students need to pay a one-time admission fee of INR 200. Moreover, the total tuition fee for Diploma in Tool Die and Mould Making admission at Central Institute of Tool Design is INR 44,700, which is valid for the entire duration of the course. Students can also check the other Central Institute of Tool Design After 10th Diploma courses.

Total Tuition Fees	₹44,700 Get Fees details
Duration	3 years
Course Level	After 10th Diploma
Mode of Course	Full Time
Official Website	Go to Website
Seat breakup	60
Type of University	Public/Government

Diploma in Tool Die and Mould Making

Table of content

Overview
Fees
Student Reviews
Entry Requirements
Admission Process

Diploma in Tool Die and Mould Making
at
Central Institute of Tool Design
Fees

Central Institute of Tool Design has a well-defined fee structure, which includes various components. The major part of the Central Institute of Tool Design Diploma in Tool Die and Mould Making fee comprises tuition fee. Other than this, other fee components, such as exam fees, on-time admission fees, registration fees, etc. are also included in the total fee structure. In addition, the total fee structure of Central Institute of Tool Design Diploma in Tool Die and Mould Making has refundable and non-refundable components as well.

Fee components	Amount (3 years)
Tuition Fees The mentioned fees is as per TS POLYCET.	₹ 44,700
One-time Payment One-time payment includes : Admission Fee Alumni Fee (only at the time of admission)	₹ 200
Total fee	₹ 44,900

These are based on information available on various sources. Latest values may differ.

Diploma in Tool Die and Mould Making
at
Central Institute of Tool Design
Students Ratings & Reviews

4.3/5

3 Verified Reviews Info Icon

4-5
2
3-4
1

Placements4.3

Infrastructure4.7

Faculty & Course4

Campus Life4

Value for Money4.7

Anonymous

Diploma in Tool Die and Mould Making - Batch of 2023

Offered by Central Institute of Tool Design

4.4

4Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money

It is not easy and not really worth the time and effort.

Placements: Dtdm students gets 100% placements, cuz you will spend your 4th year training an any company, which is your internship. Most of the time you will be get the offer to continue in the company after your completion of course, about mostly everyone will opt out to higher education. Some continue tho. When comes to package know if should call that cuz just stipend. The highest stipend offered to my batch was around 19k from skyroot aerospace and they got an offer to continue with good increment. We also got tata and for our succeding batch tata took like 40 students. You will start as a trainee and in most cases do helping jobs so do not expect much from these internships.

Infrastructure: I would Definetly say CITD has more than enough facilities compared to any other Polytechnic college. You got really big workshop other Polytechnic colleges do not even have one. Multiple cncs, lathes, milling machines. Library is also great. Hostels are okay too not bad not. Mess Food is something comment on cuz was a dayscholar and canteen contact always keeps changing. But form what heard it was not that good. When it comes to sports. No sports,. Nothing.

Faculty: Faculty was really great when joined most of them were qualified but to the end of my course most of them left still there are some good ones. And course curriculum is definitely relevant but insanely hard to cope for a student who just finished his 10 and is just 15-16 years old. So really be carefull before joining semester exams are really difficult you have to score 50% marks to pass the exam and just to tell you how hard the course is nearly 70% of students (sometimes more) get a backlog in any subject for every semester. There will be 20 (including lab and theory) subjects each from second year. So really think before joining.

Other: Even tho it sounded like a positive review would still say not to join this course because it is not easy or worth your time. If you take other courses okay, because you get to experience pretty good campus life.

Reviewed on 28 Sep 2023Read More

Soyam Sandeep Verified Icon

Diploma in Tool Die and Mould Making - Batch of 2022

Offered by Central Institute of Tool Design

4.6

5Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money

Joining this college is a really good opportunity.

Placements: Students must get around 50% in the entrance exam. 75,000 is the highest salary offered in the tool design course. A lot of companies offer placements. Many companies offer jobs after completing this course.

Infrastructure: Good hostel facilities are available in this college. A canteen is available near the hostel. Good water facilities and 24-hour electricity are available. The classrooms, labs and a library are available nearby. Out passes are provided during holidays. Attendance is mandatory.

Faculty: The faculty members are helpful and guide us in subjects and also about our goals. They help every student well. Exams are held to test students' knowledge. The faculty are good and cooperative.

Other: Scholarships are available.

Reviewed on 22 Aug 2022Read More

Lokesh Muttineni Verified Icon

Diploma in Tool Die and Mould Making - Batch of 2020

Offered by Central Institute of Tool Design

4Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money

I am satisfied, with the good placements, infrastructure, and facilities.

Placements: Every student gets placed in a company as a part of an internship which can be further continued. Almost 100% placement assurance is provided but only for internships, we get opportunities in the companies related to the course like production and design. The average package offered for the internship will be 1.5 LPA approximately.

Infrastructure: The infrastructure for this course is best here It is the only place in Telangana to do this course and all the facilities are great. Labs are excellent with all the equipment required also the library facility is very good with a good environment, the hostel is provided only for the first year and there is a canteen facility with minimal charge.

Faculty: Well-experienced teachers help us to learn theoretically as well as practically which increases the chance of better understanding. Exams are a good student has to work hard for the semester and the pass percentage is 60%, this course makes students industry ready if one does it perfectly.

Other: Unknowingly don't go for the course, the only choice, if you are interested as it is a part of mechanical engineering high earning, isn't possible in starting placements.

Reviewed on 30 Jun 2022Read More

View All 3 Reviews