5 Photos

Central Institute of Tool Design Admission 2025: Fees, Courses, Eligibility and Selection

Bala Nagar, Hyderabad

3.9 /5

(28 Reviews)

19 Student Q&A

Public/Government Institute
Estd. 1968

Last updated on 8 Oct '25

Central Institute of Tool Design Admissions
What's new?

Central Institute of Tool Design admissions 2025 are open for all the courses. Aspirants who are interested in admission can apply for their desired course through the official institute website.

Central Institute of Tool Design Admissions

Table of contents

Central Institute of Tool Design Admission Process 2025
Central Institute of Tool Design Students review

Central Institute of Tool Design Admission Process 2025

Central Institute of Tool Design admissions are entrance-based. The institute accepts scores in TS SSC and CBSE 10th, etc. Central Institute of Tool Design offers courses at UG level in Engineering and IT and Software stream. The institute offers After 10th Diploma for 3 years in various specialisations. Candidates can fill out the application form online for admission.

The total tuition fees for UG course is INR 44,700. Aspirants have to pay the programme fees at the time of admission to confirm their seat in the institute. The total fees may also include other components such as caution deposit, hostel fees, etc.

Central Institute of Tool Design
After 10th Diploma Admissions 2026

4 courses 3 years

Seat Intake240

Total Tuition Fees₹ 44.7K

Eligibility Criteria

Accepting Exams: CBSE 12th, CBSE 10th, ICSE, ISC, TS SSC, TSBIE

View course details

Central Institute of Tool Design PG Diploma Admission 2025

4 courses 18 months

Central Institute of Tool Design offers a 18 months PG Diploma course at the PG level. The institute offers PG Diploma in full time mode. There are a total of 200 seats in the PG Diploma programme. The total tuition fees for this course is INR 60,000 - 76,500. Check below the eligibility criteria for PG Diploma:

Seat Intake200

Total Tuition Fees₹ 60K - 76.5K

View course details

Central Institute of Tool Design Certificate Admission 2025

27 courses 1 month - 4 years

Central Institute of Tool Design offers Certificate for 1 month to 4 years at the Certificate level. The institute offers Certificate in specialisations such as Mechanical Engineering and Pro E. The total tuition fees for Certificate is INR 18,000 - 49,000.

Check below the eligibility for Certificate course at Central Institute of Tool Design:

Total Tuition Fees₹ 18K - 49K

Commonly asked questions
On Certificate Admissions

Q: What is the fees range for courses offerred by the Central Institute of Tool Design?

The fees range for courses offerred by the Central Institute of Tool Design is around INR 18000 - INR 154500.

View course details

Central Institute of Tool Design M.E./M.Tech Admission 2025

4 courses 2 years

Candidates interested in the fields related to Engineering can enroll in the Central Institute of Tool Design M.E./M.Tech programme, which lasts for 2 years. Candidates are not required to appear for any entrance exams as the admission process is merit-based. The final shortlist for admission to the M.E./M.Tech programme is determined by the candidates' academic scores.

Seat Intake99

Total Tuition Fees₹ 1.3L - 1.5L

View course details

Recommended Colleges

Explore popular similar colleges

Students who showed interest in Central Institute of Tool Design - PG Diploma also showed interest in

College of Arts and Commerce, Andhra University, Visakhapatnam institute image

Visakhapatnam

Courses Offered1 course

Total FeesNA

MDSU - Maharshi Dayanand Saraswati University institute image

Ajmer

Courses Offered8 courses

Total Fees₹200.00

Faculty of Law, Banaras Hindu University institute image

Varanasi

Courses Offered6 courses4.2

Total FeesNA

MGAHV - Mahatma Gandhi Antarrashtriya Hindi Vishwavidyalaya institute image

Wardha

Courses Offered12 courses

Total Fees₹3.10 K

Want better recommendations?

There is a 90% more chance of getting best college recommendations by sharing preferences.

+ Add preferences

Institute of Hotel Management, Catering Technology & Applied Nutrition, Hyderabad institute image

Hyderabad

Courses Offered1 course4.6

Total FeesNA

Centre for Development of Advanced Computing, Kukatpally institute image

Hyderabad

Courses Offered13 courses

Total Fees₹79.00 K

Faculty of Social Sciences, Kurukshetra University institute image

Kurukshetra

Courses Offered3 courses

Total Fees₹5.76 K

Keltron Toolroom Research and Training Centre institute image

Kerala - Other

Courses Offered1 course

Total FeesNA

Centre for Distance and Online Education, Aligarh Muslim University institute image

Aligarh

Courses Offered15 courses

Total Fees₹4.50 K

UOU - Uttarakhand Open University institute image

Haldwani

Courses Offered9 courses3.0

Total FeesNA

Confused about which college or exam to opt for? assitentRcpRhsImage

Chat with our counselor
Get your personalised list of colleges & exams matching your preferences

View allCollections

Is this recommendation relevant?

Central Institute of Tool Design
Students Ratings & Reviews

3.9/5

22 Verified Reviews Info Icon

4-5
10
3-4
7
2-3
5

Placements4

Infrastructure3.7

Faculty & Course4

Campus Life3.9

Value for Money4

What students say about Central Institute of Tool Design

Placements

Infrastructure

Faculty

Other

LikesView All

Wipro, Mahindra, Castrol, general electronic, Godrej are the top companies that visited the campus.

Based on 12 Reviews

Anonymous

Diploma in Tool Die and Mould Making - Batch of 2023

4.4

4Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money

It is not easy and not really worth the time and effort.

Placements: Dtdm students gets 100% placements, cuz you will spend your 4th year training an any company, which is your internship. Most of the time you will be get the offer to continue in the company after your completion of course, about mostly everyone will opt out to higher education. Some continue tho. When comes to package know if should call that cuz just stipend. The highest stipend offered to my batch was around 19k from skyroot aerospace and they got an offer to continue with good increment. We also got tata and for our succeding batch tata took like 40 students. You will start as a trainee and in most cases do helping jobs so do not expect much from these internships.

Infrastructure: I would Definetly say CITD has more than enough facilities compared to any other Polytechnic college. You got really big workshop other Polytechnic colleges do not even have one. Multiple cncs, lathes, milling machines. Library is also great. Hostels are okay too not bad not. Mess Food is something comment on cuz was a dayscholar and canteen contact always keeps changing. But form what heard it was not that good. When it comes to sports. No sports,. Nothing.

Faculty: Faculty was really great when joined most of them were qualified but to the end of my course most of them left still there are some good ones. And course curriculum is definitely relevant but insanely hard to cope for a student who just finished his 10 and is just 15-16 years old. So really be carefull before joining semester exams are really difficult you have to score 50% marks to pass the exam and just to tell you how hard the course is nearly 70% of students (sometimes more) get a backlog in any subject for every semester. There will be 20 (including lab and theory) subjects each from second year. So really think before joining.

Other: Even tho it sounded like a positive review would still say not to join this course because it is not easy or worth your time. If you take other courses okay, because you get to experience pretty good campus life.

Reviewed on 28 Sep 2023Read More

Anonymous

Diploma in Electronics & Communication Engineering (DECE) - Batch of 2022

2.4

1Placements2Infrastructure3Faculty5Crowd & Campus Life1Value for Money

I am not satisfied with this college but the infrastructure is good.

Placements: After completing the syllabus assessment, no classes were conducted, and we got leisure hours. Placements were not offered in this college. Internships or training were also provided. This college scammed people.

Infrastructure: The infrastructure was good. The food quality was not good. Laboratory classes were not conducted properly. Hostels were not clean. They offered expired products.

Faculty: Teachers were not well-qualified. The teaching skills were not good. They were also not helpful. They did not speak English. They speak Telugu. We prepared ourselves so that we never faced difficulty during semester exams. Teachers made students fail. The pass percentage was 60%.

Other: Events and extracurricular activities were not conducted. The teaching was only limited to every exam.

Reviewed on 26 Jan 2023Read More

Soyam Sandeep Verified Icon

Diploma in Tool Die and Mould Making - Batch of 2022

4.6

5Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money

Joining this college is a really good opportunity.

Placements: Students must get around 50% in the entrance exam. 75,000 is the highest salary offered in the tool design course. A lot of companies offer placements. Many companies offer jobs after completing this course.

Infrastructure: Good hostel facilities are available in this college. A canteen is available near the hostel. Good water facilities and 24-hour electricity are available. The classrooms, labs and a library are available nearby. Out passes are provided during holidays. Attendance is mandatory.

Faculty: The faculty members are helpful and guide us in subjects and also about our goals. They help every student well. Exams are held to test students' knowledge. The faculty are good and cooperative.

Other: Scholarships are available.

Reviewed on 22 Aug 2022Read More

Lokesh Muttineni Verified Icon

Diploma in Tool Die and Mould Making - Batch of 2020

4Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money

I am satisfied, with the good placements, infrastructure, and facilities.

Placements: Every student gets placed in a company as a part of an internship which can be further continued. Almost 100% placement assurance is provided but only for internships, we get opportunities in the companies related to the course like production and design. The average package offered for the internship will be 1.5 LPA approximately.

Infrastructure: The infrastructure for this course is best here It is the only place in Telangana to do this course and all the facilities are great. Labs are excellent with all the equipment required also the library facility is very good with a good environment, the hostel is provided only for the first year and there is a canteen facility with minimal charge.

Faculty: Well-experienced teachers help us to learn theoretically as well as practically which increases the chance of better understanding. Exams are a good student has to work hard for the semester and the pass percentage is 60%, this course makes students industry ready if one does it perfectly.

Other: Unknowingly don't go for the course, the only choice, if you are interested as it is a part of mechanical engineering high earning, isn't possible in starting placements.

Reviewed on 30 Jun 2022Read More

Manish nethas Verified Icon

Diploma in Electronics & Communication Engineering (DECE) - Batch of 2022

3.6

3Placements3Infrastructure4Faculty3Crowd & Campus Life5Value for Money

Good campus placement offers are there with good companies .

Placements: Being a trainee is like getting a first internship, and the college does provide internships in good company like Samsung. The students are satisfied with the placements, the packages may be limited and they are available only for toppers.

Infrastructure: Only the food is unsatisfactory. Water and other facilities are average, along with the good sanitation. The beds are of high quality and the environment is good at hostels. There is a large space provided and the playground is also there. .

Faculty: The faculty is good. The classrooms are excellent with digital boards available, they are neat and clean, the benches are comfortable too. Faculty members are highly educated.

Other: Freshers event id conducted and every festival related events are conducted along with quiz competitions.

Reviewed on 10 Feb 2022Read More

Dhanraj Nadivenkeri Verified Icon

Diploma in Production Engineering (DPE) - Batch of 2023

4.6

5Placements4Infrastructure5Faculty4Crowd & Campus Life5Value for Money

Review of Central Institute of Tool Design.

Placements: Around 50% of students are placed in our course. The top recruiting companies are Tata, Mahindra and Mahindra, and DRDO. The top roles offered in our course are molding and casting works. The college is very good at placements and other sections. It provides tool rooms where the machines are explained.

Infrastructure: It provides good library and tool rooms to know a brief about the machines and other work tools. The hostels are good and the food provided by the canteen is also good. It does not provide many sports and games in this college. The canteen has fresh food and good seating capacity.

Faculty: Faculty members are good and experienced. They teach students excellently. This makes the students work anywhere in the industry. The pass percentage in this college is above 50%. Students have to work hard in this college to get better placements.

Other: I opted for this course because students can have a future in this course. The other courses may end up for some time but this is the everlasting course which is helpful for every sector.

Reviewed on 6 Nov 2021Read More

View All 28 Reviews

Central Institute of Tool Design

Student Forum

Anything you would want to ask experts?

Write here...

What are the courses that Central Institute of Tool Design offers?

Answered 2 years ago

Central Institute of Tool Design provides programmes including PG Diploma, Certificate, M.E./M.Tech, After 10th Diploma in streams such as Engineering, IT & Software, and are excellent for students to build their careers. The institute has specializations in Mechatronics Engineering, Embedded System

Atul Mishra

Beginner-Level 1

Is Central Institute of Tool Design a good college/Institute?

Answered 2 years ago

Central Institute of Tool Design is a well-known institution for PG Diploma, Certificate, M.E./M.Tech, After 10th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Central Institute of Tool Design has a rating of 3.89 on the basis of Shik

Atul Mishra

Beginner-Level 1

What is the intake for offered courses at Central Institute of Tool Design?

Answered 2 years ago

The seats availability for offered courses at Central Institute of Tool Design goes up to 539. Courses offerred by Central Institute of Tool Design are approved by eminent Government bodies such as AICTE.

Atul Mishra

Beginner-Level 1

How is the placement facility at Central Institute of Tool Design?

Answered 2 years ago

As per Shiksha verified reviews, Central Institute of Tool Design has an impressive review rating of 3.7 by 29 students.

Atul Mishra

Beginner-Level 1

How is the faculty at Central Institute of Tool Design?

Answered 2 years ago

Central Institute of Tool Design has been rated 4.09 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

Atul Mishra

Beginner-Level 1

Content authored by: