5 Photos
Central Institute of Tool Design PG Diploma Courses and Fees 2025
- Public/Government Institute
- Estd. 1968
Last updated on 25 Apr '25Central Institute of Tool Design PG DiplomaWhat's new?
Admissions are open at Central Institute of Tool Designfor the academic session 2024-26.
Central Institute of Tool Design Overview
Table of content- Central Institute of Tool Design PG Diploma Eligibility and Highlights 2025
- Central Institute of Tool Design PG Diploma Popular courses
- Central Institute of Tool Design PG Diploma Fees details 2025
- Central Institute of Tool Design PG Diploma Seats 2025
- Students like you also explore these online PG Diploma courses
- + 2 more items
Central Institute of Tool Design PG Diploma Eligibility and Highlights 2025
PG Diploma at Central Institute of Tool Design is a Full Time course offered for a course duration of 18 months. During the 18 months course duration, students get to study various facets of their chosen specialisation. The program's curriculum is designed to prepare students to meet industry standards.
Admission to PG Diploma available at Central Institute of Tool Design is granted to students who satisfy the eligibility and selection criteria. Read on to know about the eligibility criteria:
Central Institute of Tool Design PG Diploma Fees 2025
To confirm admission to Central Institute of Tool Design courses, students must pay a certain amount of the total fees. The total fees for the PG Diploma programme consist of various components. One of the components that constitutes a majority part of the total fees is the tuition fees. The total tuition fee to pursue the course is INR 60,000 - 76,500. Also, it is important to note that the aforementioned fees is as per official sources. However, it is subject to change hence, it is indicative.
Check the table below to learn more about Central Institute of Tool Design PG Diploma course:
Return on InvestmentTotal Tuition Fees₹ 60K - 76.5K
Central Institute of Tool Design PG DiplomaPopular courses
Filter
Streams
Mode of Study
Specialization
Course Level
4 More
Showing 4 Courses
Central Institute of Tool DesignFees details 2025
| Fee components | Amount (for 18 months) |
|---|---|
₹ 60 K - 76.5 K | |
₹ 60 K - 76.5 K |
These are estimated fees information. Actual values may differ.
Recommended Colleges
Explore popular similar colleges
Students who showed interest in Central Institute of Tool Design - PG Diploma also showed interest in
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Confused about which college or exam to opt for?
- Chat with our counselor
- Get your personalised list of colleges & exams matching your preferences
View allCollections
Is this recommendation relevant?
Central Institute of Tool Design PG DiplomaCentral Institute of Tool Design PG Diploma Seats 2025
Central Institute of Tool Design has an intake of 200 students for its PG Diploma course. While allocating the seats, the university may follow the seat reservation policy prescribed by the state or the central government. Find below the total Central Institute of Tool Design PG Diploma seats:
Students like you also explore these online PG Diploma courses
₹6.4 K
1 year
₹2 L
15 months
₹3.5 L
1 year
₹18 K
1 year
View all courses
Central Institute of Tool DesignComparison with similar colleges
Compare PG Diploma at Central Institute of Tool Design with other similar colleges
| College | Median Salary | Total Tuition Fees | Ranking |
|---|---|---|---|
| -/- | ₹ 60 K - 76.5 K | -/- | |
| -/- | ₹ 79 K - 89 K | -/- | |
| -/- | ₹ 2.61 K - 40 K | -/- | |
| -/- | ₹ 2.4 K - 20 K | -/- | |
| -/- | ₹ 1.8 L | -/- | |
| -/- | -/- | -/- |
CompareThe values are of the latest years available with Shiksha. For more details, check detailed comparison
View comparisons
Central Institute of Tool Design PG DiplomaExplore Other Courses
S
Surya teja 
Post Graduate Diploma in Tool, Die and Mould Design - Batch of 2023
4.2
5Placements4Infrastructure3Faculty4Crowd & Campus Life5Value for Money
Review of Central Institute of Tool Design.
Placements: In our college, the placements are excellent. The placements are offered to every student in other states or in the college only.
Infrastructure: The infrastructure of our college is very nice. The food served in the canteen is good, which is available at affordable prices for day scholars and also for hostellers. The food is not very good but worth eating. Every machine is available in our college, which makes it easy to understand things very quickly and even makes it very easy to get placements.
Faculty: Faculty members here are very nice who are very experienced. They teach us very easily, and we can understand easily. But there is the main problem with exams, and they provide us the information about exams before 1 week or even before two or three days where we don't have any time to study for exams. The courses offered are also nice here.
Other: We can get a scholarship for our course.
Reviewed on 14 Oct 2021Read More
RS
Rithesh singh
Post Graduate Diploma in Tool, Die and Mould Design - Batch of 2018
4.2
5Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Overall, satisfied with the college.
Placements: CITD is providing good opportunities to every candidate. So, many good companies like Bajaj, Mercedes, Taal Tech, Cyient, Mekins, Siemens, Kia Motors etc. have been attended for the campus drive, but the thing is, the candidate must have skills to get the job. Package offered by various companies starts from Rs. 12,000 per month to Rs. 30,000 per month. So, I hope if anyone wants job, he/she must have good knowledge. To acquire that, they can join in this college.
Infrastructure: It has a well, and good infrastructure with lab facilities, which is open from 8 am to 9 pm. All the systems in the lab are in good working condition. There are enough systems for the students, on which they can practice in the college hours for 12 hours, also without any interruption. There is a good green environment. We have canteen food at very affordable cost.
Faculty: Faculty members are very active and efficient. They have minimum ten years of experience in teaching. They teach the students not only theoretically but also practically. They are regular to the classes. Some will take us to the tool room for practical understanding.
Reviewed on 1 Feb 2018Read More
KV
Kittu varma
Post Diploma in Tool Design (PDTD) - Batch of 2017
3.4
5Placements4Infrastructure3Faculty2Crowd & Campus Life3Value for Money
Satisfied from a holistic approach.
Placements: Tata Motors came for recruitment and around 30-40% students were placed in Tata Motors last year (DTDM batch).
And others were placed in different companies like Tata Cummins Limited, Tata Sykrosky, Godrej,
NRB Bearing
and lot more.
There is 90-100% placement guarantee. There is no doubt in it.
We can expect posts like machine operators, design, quality, PPC,
CNC controller, etc. for DTDM batches.
Infrastructure: It's a wonderful experience to study in CITD.
You have all workshop equipment, CNC, all computer aided design software.
Labs are pretty good with a wide display.
You have a register provided where you can provide feedback and it will be rectified very soon.
There are also labs for hydraulic and pneumatic.
You get a wide knowledge about these.
Faculty: The faculty is somewhat dull compared to other colleges. Experienced faculty members are extraordinary but freshers are weak to meet their requirements.
Management is somewhat poor and there are no proper guidelines for the students. Some rules are disgusting and some need to be changed but as it is a government college, they behave ignorantly.
Other: CITD has a good name across the world.
So many outside the state or country can recognise you by the college name itself.
If you have interest, you can learn a lot.
Reviewed on 6 May 2017Read More
KS
Khadar BASHA Shaik
Post Diploma in Tool Design (PDTD) - Batch of 2015
3
2Placements1Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Other: Good faculty and learning facilities but not having a good infrastructure for M.E. students. Lot of machines and machinery are there which will be helpful in gaining knowledge. Main drawback was that there is very less % of placement for masters through campus.
Reviewed on 31 Aug 2015Read More
KS
Kuda Subramanyam
Post Graduate Diploma in Tool, Die and Mould Design - Batch of 2018
4.2
4Placements4Infrastructure4Faculty5Crowd & Campus Life4Value for Money
100% placement record with good internship opportunities
Placements: 100 percent placement. The minimum percentage of students placed is 65% and above. Companies like Tata Motors, Godrej have tie-ups with the college. The students also got an internship from the college. Diploma students are also placed.
Infrastructure: Good classrooms with smart classes and advanced technology. CNC machines are also there. Well maintained workshop. AC is provided at the CNC machine centres. The lab is provided for every course. Hostel facility is available. The canteen food was good.
Faculty: Highly skilled faculty is provided by the college. They have a good understanding with the students. We get both theoretical and practical knowledge. We are also taken to JNTU Hyderabad for practicals.
Other: Events are not there in the college. Campus surrounding is good with a lot of greenery. Fees relaxation for SC/ST students.
Reviewed on 1 Mar 2018Read More
View All 5 Reviews
Central Institute of Tool Design
Student Forum
Anything you would want to ask experts?Answered a year ago
Central Institute of Tool Design provides programmes including PG Diploma, Certificate, M.E./M.Tech, After 10th Diploma in streams such as Engineering, IT & Software, and are excellent for students to build their careers. The institute has specializations in Mechatronics Engineering, Embedded System
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Institute of Tool Design is a well-known institution for PG Diploma, Certificate, M.E./M.Tech, After 10th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Central Institute of Tool Design has a rating of 3.89 on the basis of Shik
A
Atul Mishra
Beginner-Level 1
Answered a year ago
The fees range for courses offerred by the Central Institute of Tool Design is around INR 18000 - INR 154500.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
As per Shiksha verified reviews, Central Institute of Tool Design has an impressive review rating of 3.7 by 29 students.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
The seats availability for offered courses at Central Institute of Tool Design goes up to 539. Courses offerred by Central Institute of Tool Design are approved by eminent Government bodies such as AICTE.
A
Atul Mishra
Beginner-Level 1
Content authored by:
Nishtha Shukla
Updated on Apr 25, 2025
Central Institute of Tool DesignTake a look at Campus
Computer Lab
Lab
Administration Block
Classroom
Seminar HallCentral Institute of Tool DesignContact Information
Address
Bala Nagar Chaurastha, Narsapur X Road, Hyderabad, Telangana
Hyderabad ( Telangana)
Phone
04027496178
(For general query)
04023772748
(For admission query)
Email
citdplacements@citdindia.org
(For general query)
citdmarketing2@gmail.com
(For admission query)
Go to College Website ->
Useful Links
Know more about Central Institute of Tool Design
- All About Central Institute of Tool Design
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Tool Design Faculty
- Compare Central Institute of Tool Design
- Central Institute of Tool Design Q&A
Explore Courses at similar colleges
- NTTF Bangalore Campus
- Institute for Design of Electrical Measuring Instruments, Mumbai
- CIPET Bhubaneswar
- VJTI Mumbai
- Shraddha Technical Institute
- Central Tool Room and Training Centre
- Centre for Development of Advanced Computing, Kukatpally
- Nano Scientific Research Centre
- Magnus Global Tech Education
- NIELIT Calicut
What are the courses that Central Institute of Tool Design offers?