2 Photos
Central Tool Room and Training Centre College, Khordha Admission 2025: Fees, Courses, Eligibility and Selection
- Public/Government Institute
- Estd. 1991
Central Tool Room and Training Centre College, Khordha Admissions
Table of content
- Central Tool Room and Training Centre College, Khordha Admission Process 2025
- Central Tool Room and Training Centre College, Khordha Students review
Central Tool Room and Training Centre College, Khordha Admission Process 2025
Central Tool Room and Training Centre College, Khordha admission is based on both merit or exam scores of the candidates. Besides, Central Tool Room and Training Centre College, Khordha considers scores in Odisha BSE and CBSE 10th for admission to specific courses. Central Tool Room and Training Centre College, Khordha offers courses at the After 10th level.
The college offers After 10th programmes for 3 years - 4 years.
Commonly asked questions On Admissions
Q: How can I get into Central Tool Room and Training Centre College, Khordha for UG/PG courses? Am I eligible for admission?
A:
Central Tool Room and Training Centre College, Khordha has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| After 10th Diploma | Candidate must have passed 10th examination from a recognised board. |
Q: How much is the intake across all courses being offerred at Central Tool Room and Training Centre College, Khordha?
A:
The overall seats available across all courses offered by Central Tool Room and Training Centre College, Khordha is up to 120. Good thing to know is that Central Tool Room and Training Centre College, Khordha has courses which are approved by prominent Government bodies like AICTE.
Central Tool Room and Training Centre College, Khordha After 10th Diploma Admission 2025
2 courses 3 - 4 years
Central Tool Room and Training Centre College, Khordha offers a After 10th Diploma course of 3 - 4 years in full time mode. The course is available in 2 specialisations. Some of the popular ones are Tool Engineering and Mechatronics Engineering. Admission to After 10th Diploma programme at Central Tool Room and Training Centre College, Khordha is merit-based. Candidates who meets the eligibility criteria can apply directly on the college’s official website. There are a total of 240 seats available for this programme.
240
Eligibility Criteria
- Accepting Exams: CBSE 10th, ICSE, Odisha BSE
Recommended Colleges
Explore popular similar colleges
Students who showed interest in Central Tool Room and Training Centre College, Khordha - After 10th Diploma also showed interest in
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Confused about which college or exam to opt for?
- Chat with our counselor
- Get your personalised list of colleges & exams matching your preferences
View allCollections
Is this recommendation relevant?
T
Triloka Kumar Ray 
Diploma in Mechatronics Engineeing - Batch of 2024
4.6
5Placements4Infrastructure5Faculty4Crowd & Campus Life5Value for Money
The unforgettable life of CTTC.
Placements: They claim they give 100% placement to the students, and actually they give it to the trainees. MNC companies like Maruti Suzuki, Hero Motors, and Tata are coming for campus drives. A trainee will sit from the 5th semester to get a campus. They prefer students first try for MNC. That is a very good thing.
Infrastructure: Infrastructure is very good. In boys hostels, the quality of food is very good. The boys hostel is a 3-story building behind the electronics block of the college. In boys hostels, a single room has four beds, and the toilet is cleaned by the sweepers. The floor is also cleaned daily by the sweepers.
Faculty: Excellent teachers and faculty members are always helpful to the trainees. They are very skilled. These courses actually prepare the students for industry. The exam is not very tough or very easy. The teachers always motivate students to develop strong practical skills. The entire college believes in practical knowledge.
Other: I chose this course because I could learn new technology and to make me feet for industries. The best thing is you can explore different parts of energy after completing this. Events like Tech Fest teach a lot of things. World skill preparation is very good. Every Saturday doing 5s and every morning the calisthenics period is very initiative to make the students fit.
Reviewed on 27 Sep 2024Read More
A
Anonymous
Diploma in Tool and Die Engineering - Batch of 2024
3.8
5Placements4Infrastructure4Faculty2Crowd & Campus Life4Value for Money
Review of entral Tool Room and Training Centre College.
Placements: Placements are good in our college. The placement cell is supportive. Our college provides 100% placements. The salary offered ranges between Rs. 15,000-25,000 per month. Our college provides one-year paid internships. Many students got placed from our college in top companies like Tata, Mahindra, Ashok Leyland, etc. Top roles offered are CNC operator, design engineer, etc.
Infrastructure: The infrastructure of our college is good. All machines are available in our labs. Wi-Fi and common rooms are not available in our college. The hostel is average. The food served in the hostel is not good. Sports and medical facilities are available on campus.
Faculty: Our teachers are good but not friendly. Their teaching quality is good. They organise workshops to enhance students' experience and learning. We can pass exams easily. The course curriculum is good. Exams depend on students' studies.
Reviewed on 1 Dec 2022Read More
S
Sarthak Kumar Kar
Diploma in Tool and Die Engineering - Batch of 2024
4.2
5Placements4Infrastructure3Faculty4Crowd & Campus Life5Value for Money
Satisfied by the placements but dissatisfied by the faculty members.
Placements: Great placements are there, the rate is 100%.
Monthly package is minimum 15,000 and maximum is 35,000. Tata, Suzuki, HAL, ISRO are the top recruiters. The college provides 1 year paid internship. In the period of internship, you can join here as a faculty, design engineer or a workshop instructor.
Infrastructure: Classrooms are okay, but the hostel and canteen are not good as expected. No Wi-Fi is there but workshop is great. Very good machineries are available. The college is more oriented about mechanical, and all software are available for mechanical design. Infrastructure is good but area is less.
Faculty: Faculty members are good but some of them are not that friendly. Exams are conducted in a fair way. The DTDM course is having a great placement opportunity. As per your study, you will clear the semesters without any difficulty. Basically, you will gain more practical knowledge.
Reviewed on 21 Nov 2022Read More
R
Roysen Tudu
Diploma in Tool and Die Engineering - Batch of 2024
4.4
5Placements4Infrastructure4Faculty4Crowd & Campus Life5Value for Money
Good infrastructure and facilities.
Placements: Almost 100% placement and good companies come fore recruiting the students. Good opportunities and also a lot of companies comes for placement. This college has production centre also where skilled students can also get a job and they can be a faculty also.
Infrastructure: Well, cleaned hostel hygienic foods are available. Good room size and well furnished. Safety for students as the hostel is fully CCTV monitored the good amount of open area not too much problem in summer and well serviced as if bulbs are not working if informed it get repaired within 24 hrs.
Faculty: Faculty members r well educated and well trained for trainees. They are very much interactive and helpful. For any issues, if personal also help and support positively. Well, teachers are like friends. Helpful at exam times. They provide good notes.
Other: Normal campus.
Reviewed on 28 Apr 2022Read More
Soubhagya Ranjan Pradhan
Diploma in Mechatronics Engineeing - Batch of 2021
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Teachers are really nice.
Placements: Placement is the backbone of this college beside this bad management team. They provide every possible resource for preparing for placement. We have good teachers and good courses. This year a student got the package of 23 lacs and the average placement is around 4-5 lacs. Every company ranging from average to big product based companies come here like HCL, Amazon, wipro etc.
Infrastructure: Our infrastructure is okay. Its not too big campus but it is good enough. We have Wi-Fi but it's not accessible in the classroom. There are library for every department. Library has proper Wi-Fi. Our labs are okayish they are not too big but it has every required equipment. Campus has boys hostel which is very good.
Faculty: Teachers are really nice. They are proper knowledgeable. We are provided here course structure and every teachers follow it. Maths and Physics faculty are very good in this college. Exam are little bit tough. We have to study for our exams. And around 80% students passes their semester exam here.
Other: Overall this is a good college.
Reviewed on 31 Aug 2021Read More
Photos
K
K Premsai Patra
Diploma in Tool and Die Engineering - Batch of 2020
4.2
5Placements3Infrastructure5Faculty4Crowd & Campus Life4Value for Money
I suggest this college to those who are interested in engineering.
Placements: Every student gets placed on campus. In this course, the package offered is 1.8 LPA. Top recruiting companies are Maruti Suzuki, Ahresty India Pvt., Ltd etc. Every student got an internship for one year in different companies.
The top role offered is CAD designer.
Infrastructure: The fee is minimal for hostel and food, but the food quality is average. They provide a better environment and better guidance in hostels. Wi-Fi, television, lift, library, etc., are available. The food quality is different on different days.
Faculty: The faculty members are hired by the central government of India, and they provide you with minimal course and no unnecessary study material. They give you more practical knowledge than theory. That helps to work smoothly in the company/industry. Teaching quality is excellent and digital.
Reviewed on 31 May 2021Read More
View All 6 Reviews
Central Tool Room and Training Centre College, Khordha
Student Forum
Anything you would want to ask experts?Answered a year ago
Central Tool Room and Training Centre College, Khordha has been rated 4.4 on Infrastructure parameter.
Central Tool Room and Training Centre College, Khordha provide good facilities all around the campus such as Auditorium, Boys Hostel, Cafeteria, Girls Hostel, Gym, Hospital / Medical Facilities, Ho
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Tool Room and Training Centre College, Khordha has been rated 4.5 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Tool Room and Training Centre College, Khordha has been rated 5 on placements.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Tool Room and Training Centre College, Khordha is a well-known institution for After 1th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Central Tool Room and Training Centre College, Khordha has a rating of 4.6 on the basis of re
A
Atul Mishra
Beginner-Level 1
Content authored by:
Nishtha Shukla
Updated on Aug 23, 2024
Central Tool Room and Training Centre College, KhordhaTake a look at Campus
Campus Building
Hostel BuildingCentral Tool Room and Training Centre College, Khordha News & Updates
Latest
Popular
Central Tool Room and Training Centre College, KhordhaContact Information
Address
B-36, Chandaka Industrial Area Po KIIt Campus
Khurda ( Orissa)
Go to College Website ->
Useful Links
Know more about Central Tool Room and Training Centre College, Khordha
- All About Central Tool Room and Training Centre College, Khordha
- Courses 2026
- Reviews on Placements, Faculty & Facilities
- Placement - Highest & Average Salary Package
- Gallery 2026
- Infrastructure Details & Reviews
- Central Tool Room and Training Centre College, Khordha Faculty
- Compare Central Tool Room and Training Centre College, Khordha
- Central Tool Room and Training Centre College, Khordha Q&A
What facilities are there at Central Tool Room and Training Centre College, Khordha in terms of infrastructure?