6 Videos,7 Photos
National Institute of Advanced Manufacturing Technology UG Diploma Courses and Fees 2025
- Public/Government Institute
- Estd. 1966
Last updated on 21 Nov '25NIAMT Overview
Table of contents
- National Institute of Foundry and Forge Technology UG Diploma Eligibility and Highlights 2025
- NIAMT UG Diploma Popular courses
- NIAMT UG Diploma Fees details 2026
- National Institute of Foundry and Forge Technology UG Diploma Seats 2025
- Students like you also explore these online UG Diploma courses
- + 2 more items
National Institute of Foundry and Forge Technology UG Diploma Eligibility and Highlights 2025
National Institute of Foundry and Forge Technology offers a
National Institute of Foundry and Forge Technology UG Diploma Fees 2025
Candidates selected for admission at National Institute of Foundry and Forge Technology must submit the applicable fees to confirm the seat allocation. The total National Institute of Foundry and Forge Technology UG Diploma fee is INR 59,250 for 18 months. Besides the course fee, candidates must pay certain one-time charges at admission. The mentioned fee is taken from the official website of the institute/sanctioning body. It is still subject to change and, hence, is indicative.
Check out the following table presenting the key highlights of the National Institute of Foundry and Forge Technology UG Diploma:
Return on InvestmentTotal Tuition Fees₹ 59.3K
Commonly asked questions On Highlights
Q: How much is the median salary of M.E./M.Tech course by National Institute of Foundry and Forge Technology?
A:
Median salary of M.E./M.Tech course is INR 425,000 as per the reports/data available.
Q: Is minimum rank of 50000 sufficient for admission in CE at National Institute of Foundry and Forge Technology under General AI?
A:
Yes, to get into National Institute of Foundry and Forge Technology, 50000 is satisfactory rank. With this rank, candidates can fetch any course including BTech in Computer Engineering. Moreover, considering the NIFFT cutoff 2025 the General AI category cutoffs for BTech for the same institute stood between 52112 and 79054. Similary, for the OBC AI category candidates, the needed rank ranged between 18159 and 31249. The rank is more than sufficient to get admission with General AI quota, However, not for OBC AI quota, as the rank is bit too low to get you any course under OBC quota.
Q: Which courses does National Institute of Advanced Manufacturing Technology offer to students?
A:
National Institute of Advanced Manufacturing Technology has courses such as M.E./M.Tech, UG Diploma, B.Tech to offer. These courses are in the stream of Engineering. National Institute of Advanced Manufacturing Technology has specializations such as M.E./M.Tech specializations in Environmental Engineering, Metallurgical Engineering, B.Tech specializations in Mechanical Engineering, Metallurgical Engineering, Production Engineering, Computer Science Engineering.
Q: How much is the intake across all courses being offerred at National Institute of Foundry and Forge Technology?
A:
The overall seats available across all courses offered by National Institute of Foundry and Forge Technology is up to 614. Good thing to know is that National Institute of Foundry and Forge Technology has courses which are approved by prominent Government bodies like AICTE.
NIAMT UG DiplomaPopular courses
Filter
Specialization
Exams Accepted
Total Fees
Streams
4 More
Showing 2 Courses
46
- – / –
– / –
₹59.25 K
46
- – / –
– / –
₹59.25 K
Commonly asked questions On All Courses
Q: What is the cutoff of National Institute of Foundry and Forge Technology for 2025 admission?
A:
The Round 1 seat allotment has been released by NIFF Ranchi, The National Institute of Foundry and Forge Technology cutoff 2025 closing ranks for BTech admission stood between 44591 and 68691 for the General AI category candidates. Among all the specialisations, the CSE being the most favourable one. The cutoff for Mechanical Engineering and B.Tech. in Production and Industrial Engineering specialisations stood at 57853 and 68354, respectively, for the students belonging to the General AI quota. Candidates can refer to the table below to view the last three years final round cutoff data for the General AI quota to understand the cutoff trends:
| Course | 2023 | 2024 | 2025 |
|---|---|---|---|
| B.Tech. in Metallurgy and Material Engineering | 135582 | 160019 | 68691 |
| B.Tech. in Mechanical Engineering | 103803 | 114041 | 57853 |
| B.Tech. in Production and Industrial Engineering | 170137 | 285813 | 68354 |
| B.Tech. in Computer Engineering | 74765 | 91147 | 44591 |
Q: What specializations do National Institute of Foundry and Forge Technology offer in their courses?
A:
National Institute of Foundry and Forge Technology is a good institution for M.E./M.Tech, UG Diploma, B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at National Institute of Foundry and Forge Technology are Environmental Engineering, Metallurgical Engineering, Mechanical Engineering, Production Engineering, Computer Science Engineering.
Q: Which major specializations are available at National Institute of Advanced Manufacturing Technology?
A:
National Institute of Advanced Manufacturing Technology offers Degree and Diploma courses including 7 UG and 5 PG courses. These programs are offerred in Full Time mode. National Institute of Advanced Manufacturing Technology has specializations such as M.E./M.Tech specializations in Environmental Engineering, Metallurgical Engineering, B.Tech specializations in Mechanical Engineering, Metallurgical Engineering, Production Engineering, Computer Science Engineering.
NIAMT UG DiplomaFees details 2026
| Fee components | Amount (for 18 months) |
|---|---|
₹ 59.25 K | |
₹ 59.25 K |
These are estimated fees information. Actual values may differ.
Recommended Colleges
Explore popular similar colleges
Students who showed interest in National Institute of Advanced Manufacturing Technology - UG Diploma also showed interest in
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Confused about which college or exam to opt for?
- Chat with our counselor
- Get your personalised list of colleges & exams matching your preferences
View allCollections
Is this recommendation relevant?
NIAMT UG DiplomaNational Institute of Foundry and Forge Technology UG Diploma Seats 2025
The seat intake can vary from one specialisation to another. Students who get through the selection process get a seat. The institute may follow the seat reservation rules of the state or central government. Students can check below table for the National Institute of Foundry and Forge Technology UG Diploma seat intake:
92
Total Seats AvailableStudents like you also explore these online UG Diploma courses
View all courses
NIAMT UG DiplomaComparison with similar colleges
Compare UG Diploma at NIAMT with other similar colleges
| College | Median Salary | Total Tuition Fees | Ranking |
|---|---|---|---|
| -/- | ₹ 59.25 K | -/- | |
| -/- | ₹ 86.5 K - 1.4 L | -/- | |
| -/- | ₹ 30 K - 1.2 L | -/- | |
| -/- | -/- | -/- | |
| -/- | -/- | -/- | |
| -/- | ₹ 8 K - 1.06 L | -/- |
The values are of the latest years available with Shiksha. For more details, check detailed comparison
View comparisons
NIAMT UG DiplomaExplore Other Courses
P
Prasenjit pandey 
Advance Diploma in Forge Technology - Batch of 2022
4.8
5Placements5Infrastructure4Faculty5Crowd & Campus Life5Value for Money
Advance Diploma in forging (nifft).
Placements: In our course there are 40 students and almost 100% get placed in reputed forging company like RKFL Jamshedpur, Bharat forge, Viraj profiles Ltd, kems forging, bansal forging, che forge etc. The highest package was INR 3.2 lakhs CTC per year, the lowest was INR 2.4 lakhs CTC per year and average package was INR 2.8 lakhs CTC per year. Almost 100% got internship in Rkfl, bharat forge, kems forging etc. All the students got placed in GET position.
Infrastructure: In this college for ADC Forge and Foundry hostel, Homi J bhabha Hostel for boys there is free Wi-Fi available. In hostel one room is for two students with two beds, two study tables, fans etc. In hostel mess the food quality is very good and tasty and food is available three times ,breakfast lunch and dinner. There are big classrooms with projector facilities, labs available for practical and library available for books which is related to course which are not available in the market. There is also medical facilities available from 9am to 6pm. There is a big ground available for sports activities like cricket, football, running, jogging, exercise etc.
Faculty: Yes in this college teachers are very helpful and highly qualified from reputed college like IITs.
Their teaching quality is very practically understandable. These teachers are highly qualified and some have worked at the industries. Then there is knowledge about practicals that we can gain. Yes, there are some difficulty in semester exams but if you study hard then there are no problems. Passing percentage is 40%.
Other: Because I am interested in this field. In forging industry there is great scope. You get to learn many things in forging industry.
Yes in this college there are annual festival organised by students and college committee like Jinks fest, tech fest, annual sports, etc. Yes in this course, scholarship facilities are available for all the ADC students and no reservation issues are there for this.
Reviewed on 26 Feb 2023Read More
N
NARAYAN CH BOSE
Advance Diploma in Forge Technology - Batch of 2017
4.4
4Placements5Infrastructure5Faculty3Crowd & Campus Life5Value for Money
It is the only institute that provides forge and foundry courses.
Placements: This college was very good and confirms 100% of placements. A lot of companies visit the campus to hire students and offer very good packages. Previous year, the average salary offered for ADC was around Rs 23,000 per month. The maximum salary offered was Rs 35,000 per month. The top recruiting companies were Jindal, RKFL, Viraj, Nysam, etc., visit for placements.
Infrastructure: This college provides different hostels for different courses like Homi J Bhabha hostel for ADC and Nirala Chatrawas for girls. Hostels were clean and beautiful. Four hostels for boys and one for girls. It had one library, and a mess where students can get food. Mess was very cleaned and it provides students good food. The mess fee was Rs 3,100 per month. It provides one medical block, and two big grounds for play.
Faculty: The course curriculum was very good. They use traditional teaching methods. They had a workshop where can students gain practical knowledge. The professors were very good and helpful. Students will never know when the exam will knock on their door, and many exams were held by this college so always prepared themselves. Students will be pass if they attend the classes on regular basis.
Other: Scholarships were available for ADC students as well as for B. Tech and M. Tech students. ADC courses offered Rs 2500 per month and for M. Tech Rs 12,500 per month. This college organise Jinks fest every year, and celebrate during fests. This was the only institute that provides forge and foundry courses in Aisa.
Reviewed on 23 Feb 2022Read More
PM
Parimal Manna
Advance Diploma in Foundry Technology - Batch of 2021
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
There are almost 100% placements in most years. Hostel infrastructure is very good.
Placements: Almost 95% of the students in our course are placed. The highest salary offered is around Rs. 40,000 per month. The lowest salary offered is around Rs. 18,000 per month. Many companies like Hindalco, Jindal, MIDHANI, Sigma, Patil, etc., are the top recruiters. Students are posting in as supervisor, manager, foundryman, forge master level. The highest salary package offered in our course is 4.3 LPA. The lowest salary package offered in our course is around 2.1 LPA. The average salary package offered in our course is around 2.5 LPA. Almost 100% of the students got internships from our college in Tata Motors and Sigma.
Infrastructure: Library books are available for students. Here we have a playground for cricket and football. There is a volleyball court. Wi-Fi facility is available in the hostel. Labs are there with complete instruments. Workshops are here with complete instruments and machines. In the classroom, there is a projector and sound system. The quality of our mess is a bit good. For a medical check-up, we have a medical card. On the campus, there is a clinic, and the doctor is also available for free check-up or medicine.
Faculty: Teachers here are very good and helpful for us. They are highly qualified. They all are PhD holders. Their teaching quality is very good. The course curriculum is relevant, and it makes student industrial ready with the help of different subjects. Personality development classes are conducted here. There is a 6-month of training for development which makes all students industrial-ready.
Other: This is a higher study course that for I have chosen this course after qualifying in the entrance exam. After 18 months, the students get a job with good campusing every year. Gaining high knowledge is the best thing in this course. Everything is the best in this course, so there is nothing to improve. Events like Viswakarma Puja, Janmashtami, Saraswati Puja, Alumni Association fest, Jinks programme, are conducted here. The campus crowd is very much for ADC, B.Tech, M.Tech, PhD. Extracurricular activities like football, cricket, basketball, volleyball, badminton, table tennis, carrom, music room, music instruments room, gymkhana, all are present in the college.
Reviewed on 26 Jan 2020Read More
(1) 1 person found this helpfulAP
Ankita Pal
Advance Diploma in Foundry Technology - Batch of 2021
4.8
5Placements5Infrastructure5Faculty5Crowd & Campus Life4Value for Money
The college provides almost 100% of the placements. Hostel and infrastructure are very good.
Placements: Almost 95% of the students in our course got placed. The highest salary offered is Rs. 40,000 per month and the lowest salary offered is Rs. 18,000 per month. Top recruiting companies like Hindalco, Jindal, Midhani and Sigma visit our campus for placements. Top roles, like a supervisor, manager, foundryman, and forge master, are offered to the students. The highest salary package offered in our course is 4 LPA, and the average salary package offered is 2 LPA, and the lowest salary package offered is 1.8 LPA. Almost 100% of the students got an internship from our college in companies like Tata Motors and Sigma.
Infrastructure: Facilities like a library, playing instruments, ground, labs with the complete instrument and machines and classrooms are equipped with a projector. Workshops are conducted. Wi-Fi facility is available in the hostel. Quality of food served in the mess is a little bit good. For Medical check-up, we have a medical card. On-campus there is a doctor available for us for a free check-up with medicines. Gymkhana is also available in our college.
Faculty: Teachers in our college are very much helpful to us. They are very much qualified. They all are PhD holders. Their teaching quality is very good. The course curriculum is relevant. They make the students industry-ready with the help of different subjects, personality development class, and 6 months of training.
Other: I have chosen this course because it is a higher study course. After qualifying in the entrance exam, I have chosen this course. After 18 months students get a job with good campusing every year, and they gain high knowledge which is the best thing in our course. Everything is best in our course, so nothing should be improved. Events like Viswakarma Puja, Janmashtami and alumni association, and fest like jinks programme are organised at our college. Campus crowd is more. Connectivity is good. It will take more than 40 minutes for surrounding of all the campus. Scholarships are provided for all the course including ADC, B.Tech, M.Tech and PhD. Extracurricular activities like football, cricket ground, basketball, volleyball, badminton court, carrom, table tennis and music room are conducted in our college.
Reviewed on 15 Jan 2020Read More
SA
SALIM AZHAR
Advance Diploma in Foundry Technology - Batch of 2016
4.2
4Placements4Infrastructure4Faculty4Crowd & Campus Life5Value for Money
The college has good placements and infrastructure.
Placements: The placement in the college is good as almost all the students placed nearly around ending of the session. The salary offered from 2.6-4.5 lacs per annum. The companies like Maruti Suzuki, Tata Motors, Kores India, Shriram Piston & Rings, Lava Cast, GPP, etc., have visited the college every year. The position offered by the companies to students are as GET. The stipend offered to students through MHRD is Rs. 2,500 per month. The placements conduct through the placement cell in the college.
Infrastructure: The college has a lecture hall, library, medical facilities, gymkhana, sports grounds for cricket, badminton, volleyball, and football for students. We have an excellent quality of labs and lecture hall, and the food offering to students in the canteen is good. The hostel rooms are also available for single and duet students on the campus.
Faculty: The teachers available in the college are highly qualified from IITs. The teachings skills are good, and the student to faculty ratio in the college is around 45:1, which is good. We get industrial training from the companies like Tata Motors and BHEL India Ltd. The course curriculum of the college is good for foundry purpose, and it covers all.
Other: Every year, the events like Jinks conducted on the campus in which the celebrities interact with students. The scholarships are offered to the students. The sports competition is conducted every year in the college.
Reviewed on 25 Mar 2018Read More
AK
Ambun Kumar
Advance Diploma in Foundry Technology - Batch of 2017
3.8
4Placements4Infrastructure3Faculty3Crowd & Campus Life5Value for Money
The placements of the college are excellent.
Placements: My batch placement was almost 80% with the average package of 2.4 LPA. The campus placement of this college is excellent. The companies like Tata Motors, Maruti, DCM visited every year for placement with the exciting package. Now my friends and I are working very happily.
Infrastructure: The infrastructure of ht college is excellent and are equipped with all major and minor facilities. The hostels and classrooms are excellent. There is a football stadium, gymkhana club for students activities and library in the college. The labs and workshops are world class equipped with modern machinery, and there is also free Wi-Fi facility.
Faculty: The course curriculum for foundry tech is specifically designed very well considering industrial aspects. There are very helpful and very many knowledgeable teachers. All the teachers have done PhDs from IIT. The way they teach is very good. The last semester is especially for industry exposure of students by doing VT at two major industries for 3 months.
Reviewed on 26 Jan 2018Read More
View All 8 Reviews
NIAMT
Student Forum
Anything you would want to ask experts?Answered a year ago
Yes, the National Institute of NIAMT, fomerly known as the National Institute of Foundry and Forge Technology (NIFFT), has a placement cell :
- Placement cell: The placement cell at NIAMT conducts placement drives with top companies for final year degree students. The cell aims to help students develop
K
Keerthi Vishnumolakala
Contributor-Level 7
Answered a year ago
B.E. / B.Tech is the best choice at National Institute of Foundry and Forge Technology because of its high placement rate, good infrastructre and faculty. Almost 98% of the students get placed every year. The highest package offered till now is INR 16 lakh per annum, and the lowest is INR 4 LPA. All
K
Keerthi Vishnumolakala
Contributor-Level 7
Answered a year ago
Yes, the National institute of Foundry and Forge Technology (NIFFT) in Ranchi has experienced faculty:
- Faculty qualifications: More than 90% of the faculty have a Ph.D. and many have industrial experience.
- Faculty support: Students say the faculty is supportive and helpful, and that they provide aca
K
Keerthi Vishnumolakala
Contributor-Level 7
Answered a year ago
The quality of food in the hostel mess at the National Institute of Foundry and Forge Technology (NIAMT) in Ranchi is average or below average.
Meal times | |
|---|---|
Breakfast | 7–8:30 AM |
Lunch | 12:30–2:30 PM |
Snacks | 5–6 PM |
Dinner | 7:30–9 PM |
K
Keerthi Vishnumolakala
Contributor-Level 7
Answered a year ago
The faculty at the National Institute of Foundry and Forge Technology (NIAMT) in Ranchi, India is known for being well-qualified, helpful, and knowledgeable:
- Qualifications: More than 90% of the faculty members have a Ph.D. degree, and many have industrial experience.
- Teaching quality: Some say the
K
Keerthi Vishnumolakala
Contributor-Level 7
Content authored by:
Nishtha Shukla
Updated on Nov 21, 2025
NIAMTTake a look at Campus
Administrative Building
Classroom
Entrance
NIAMTContact Information
Address
Near Kanchnatoli,
Hatia, Ranchi
Ranchi ( Jharkhand)
Phone
06512292076
(For general query)
06512290859
(For admission query)
Email
gsdnifft@gmail.com
(For general query)
nifftranchi@gmail.com
(For admission query)
Go to College Website ->
Is there a placement cell available at National Institute of Foundry and Forge Technology?