Diploma in Electrical Engineering colleges in India

The fees range for courses offerred by the Prakasam Engineering College is around INR 54000 - INR 172000.

V.S.M College Of Engineering has below criteria for taking admissions to it's various courses:

Courses	Eligibility
MCA	Candidate must have passed Bachelor degree of 3/4 years duration with Mathematics as one of the subject at Intermediate or Degree level with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.

Government Co-Ed Polytechnic College, Raipur courses are approved by eminent Government bodies such as AICTE. The combined seats available for various programmes provided by Government Co-Ed Polytechnic College, Raipur goes up to 180.

Sir C Ramalinga Reddy Polytechnic offers various courses in Engineering, Science stream. The courses are available in full-time mode. Sir C Ramalinga Reddy Polytechnic has specializations such as Electrical Engineering, Electronics Engineering, Civil Engineering, Computer Science, Mechanical Engineering, Electronics & Communication Engineering.

No, the Gokula Krishna College of Engineering doesn't provide direct admission to the students. Admissions to the College are made along with the other Engineering Colleges in the State through a common entrance test (EAMCET) conducted by the Govt. of Andhra Pradesh.

Tolani F G Polytechnic College provides programmes including After 10th Diploma in streams such as Engineering, and are excellent for students to build their careers. The institute has specializations in Mechanical Engineering, Civil Engineering, Electrical Engineering, Computer Science Engineering.

Birla Technical Training Institute Pilani is known for its Polytechnic Diploma courses offered in the field of Engineering. The courses are offered in the streams like Mechanical, Electrical, Electronics & Computer Science. The college gives students a good infrastructure with required facilities like hostel and library, trained faculty and 100% placement assistance. Top companies like CarDekho, Maruti Suzuki, etc. come to hire the students in various job roles. It is definitely worth doing the courses from BTTI.

Memari Government Polytechnic College has been rated 5 on Infrastructure parameter. Memari Government Polytechnic College offers good infrastructure such as Auditorium, Cafeteria, Gym, Hospital / Medical Facilities, Hostel, Labs, Library, Sports Complex, Wi-Fi Campus to students. Memari Government Polytechnic College has also been rated 5 for Campuslife.

Courses offerred by Bhiwadi College of Polytechnic are approved by eminent Government bodies like AICTE. The combined seats available for courses offered at Bhiwadi College of Polytechnic goes up to 720.

Government Polytechnic, Mau has been rated 4 on Infrastructure parameter. Government Polytechnic, Mau has also been rated 4 for Campuslife.

The flagship courses offered at C.V. Raman Polytechnic are After 10th Diploma. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, C.V. Raman Polytechnic has a rating of 5 by students. The college's Campus Life, Placements, Faculty, and Infrastructure have been rated as 5, 5 and 5 respectively.

Shree Dev Bhoomi Institute of Education, Science and Technology is a good institution for M.Ed, B.Ed, B.Pharma, M.Pharma, Pharm.D, UG Diploma, After 10th Diploma, D.Pharma, B.Sc, BBA, BCA, GNM courses, and these programs are delivered by highly experienced faculty. Major specialisation at Shree Dev Bhoomi Institute of Education, Science and Technology are Quality Assurance, Pharmaceutical, Automobile Engineering, Civil Engineering, Mechanical Engineering, Electrical Engineering, Agriculture, General Nursing & Midwifery.

Rourkela Institute of Technology have rating of 3.17 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Combined intake across all courses at Ludhiana Polytechnic College is up to 360. Ludhiana Polytechnic College offers After 10th Diploma courses for students to build their careers in Engineering. These highly regarded programs are available in full-time mode, catering to the needs of students who wish to obtain a comprehensive education in this field.

The Techno School (TTS, Bhubaneswar) has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have passed 10+2 examination with Physics, Mathematics and Chemistry and obtained at least 45% marks for general (40% marks for in case of candidates belonging to reserved category) in the above subjects taken together.
MBA/PGDM	Candidate must have completed Bachelor degree of minimum 3 years duration with above mentioned marks from any recognised University/Institute. 45% marks in case of candidates belonging to reserved category.
MCA	Candidate must have completed BCA/ Bachelor Degree in Computer Science Engineering or equivalent Degree with above mentioned marks from any recognised University/Institute. OR Candidate who have completed B.Sc./ B.Com./ B.A. with Mathematics at 10+2 Level or at Graduation Level can also apply. 45% marks in case of candidates belonging to reserved category.
M.E./M.Tech	Candidate must have completed Bachelor degree or equivalent in the relevant field of engineering and technology with above mentioned marks from any recognised University/Institute. 45% marks in case of candidates belonging to reserved category.
After 10th Diploma	Candidate passed 10th class/equivalent conducted by BSE, Odisha/equivalent are eligible to apply. The lower age limit is 14 years and there is no upper age limit.

The fee bracket for programs offerred by the Santiniketan Institute of Polytechnic is approximately INR 54000.

Beharagora Polytechnic College offers various courses like After 10th Diploma in Engineering stream. Beharagora Polytechnic College has specializations such as Mining Engineering, Metallurgical Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering.

At the undergraduate level, AISECT University offers BA, BCA, BCom,  BSc, and other courses to students. At the PG level, the university provides MA, MCA,  MCom, MSc, and other courses to students. MA is provided in nine specialisations, namely Economics, Sociology, Psychology, and others. 

Yashwantrao Chavan Polytechnic College have rating of 3 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Chhatrapati Shahu Ji Maharaj Group of Institutions has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have passed 10+2 or equivalent examination from a recognised school/board.
After 10th Diploma	Candidate must have passed class 10th examination with a minimum of 35% marks from a recognised board/Institute. The minimum age is 14 years as on 1st July 2022, i.e. born on or before 01-07-2009.

Netaji Subhas Institute of Polytechnic has below criteria for taking admissions to it's various courses:

Courses	Eligibility
After 10th Diploma	Candidate must have passed class 10th from any recognised board/council. Result awaited candidate can also apply.

Government Polytechnic College, Sirsa provides programmes including After 10th Diploma in streams such as Engineering, and are excellent for students to build their careers. The institute has specializations in Computer Science Engineering, Mechanical Engineering, Agriculture & Farm Engineering, Civil Engineering, Electrical Engineering, Electronics & Communication Engineering.

SD Mewat Institute of Engineering and Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidates who have 10+2 in Physics, Chemistry and Mathematics (PCM) with 55% marks from a recognised board are eligible to apply.
After 10th Diploma	Candidate must have passed 10th Std/ SSC Examination from a recognised board.

Mahavir Polytechnic College offers various courses like After 10th Diploma in Engineering stream. Mahavir Polytechnic College has specializations such as Electronics Engineering, Civil Engineering, Computer Science Engineering, Electrical Engineering, Information Technology, Mechanical Engineering.