M.Tech in VLSI Design colleges in India
There are 796 colleges offering VLSI Design in India. Among these, split of colleges by ownership is private owned: 641, public / government owned: 112 and public private owned: 4.
Location wise
Major cities across the nation provide a variety of VLSI Design. Of all the cities, Andhra Pradesh has the most Top VLSI Design colleges in India, based on the number of institutions.
| Location Details | Colleges |
|---|---|
| Andhra Pradesh | 180 Colleges |
| Tamil Nadu | 139 Colleges |
| Telangana | 110 Colleges |
| Maharashtra | 61 Colleges |
| Madhya Pradesh | 57 Colleges |
| Hyderabad | 54 Colleges |
| Karnataka | 50 Colleges |
| Delhi/NCR | 34 Colleges |
| Bangalore | 32 Colleges |
| Coimbatore | 31 Colleges |
| Kerala | 31 Colleges |
| Pune | 31 Colleges |
| Chennai | 30 Colleges |
| Andhra Pradesh - Other | 27 Colleges |
| Bhopal | 27 Colleges |
| Rajasthan | 25 Colleges |
| Guntur | 24 Colleges |
| Uttar Pradesh | 24 Colleges |
| West Bengal | 17 Colleges |
| Tamil Nadu - Other | 16 Colleges |
Specializations
VLSI Design offers diversified specialisations like Computer Science Engineering, Mechanical Engineering and Electronics & Communication Engineering. Refer the table below showing number of colleges offering each VLSI Design specialisation:
| Specialization Details | Colleges |
|---|---|
| Computer Science Engineering | 2273 Colleges |
| Mechanical Engineering | 1092 Colleges |
| Electronics & Communication Engineering | 826 Colleges |
| Structural Engineering | 810 Colleges |
| VLSI Design | 796 Colleges |
| Power Engineering | 785 Colleges |
| Electrical Engineering | 595 Colleges |
| Civil Engineering | 564 Colleges |
| Electronics Engineering | 555 Colleges |
| Communications Engineering | 389 Colleges |
| Artificial Intelligence & Machine Learning | 295 Colleges |
| Information Technology | 271 Colleges |
| Environmental Engineering | 250 Colleges |
| Construction Engineering | 248 Colleges |
| Industrial Engineering | 178 Colleges |
| Production Engineering | 178 Colleges |
| Transportation Engineering | 174 Colleges |
| Biotechnology Engineering | 160 Colleges |
| Embedded Systems & VLSI | 150 Colleges |
| Chemical Engineering | 146 Colleges |
Entrance Exams
GATE is the most popular exam accepted by VLSI Design in India. Refer to the table below showing exams accepted by number of colleges:
| Exam Details | Colleges |
|---|---|
| GATE | 539 Colleges |
| AP PGECET | 154 Colleges |
| CEETA | 95 Colleges |
| MHTCET MTech | 49 Colleges |
| TS PGECET | 47 Colleges |
| Karnataka PGCET | 41 Colleges |
| CUET-PG | 18 Colleges |
| KCET | 15 Colleges |
| TANCET | 8 Colleges |
| OJEE | 8 Colleges |
| WBUT PGET | 6 Colleges |
| JEE Main | 5 Colleges |
| VITMEE | 4 Colleges |
| COAP | 4 Colleges |
| GUJCET | 3 Colleges |
| GITAM GAT | 3 Colleges |
| AMIE Exam | 3 Colleges |
| IPU CET | 3 Colleges |
| PERA CET | 3 Colleges |
| JEE Advanced | 2 Colleges |
There are 796 colleges offering VLSI Design in India. Among these, split of colleges by ownership is private owned: 641, public / government owned: 112 and public private owned: 4.
Location wise
Major cities across the nation provide a variety of VLSI Design. Of all the cities, Andhra Pradesh has the most Top VLSI Design colleges in India, based on the number of institutions.
| Location Details | Colleges |
|---|---|
| Andhra Pradesh | 180 Colleges |
| Tamil Nadu | 139 Colleges |
| Telangana | 110 Colleges |
| Maharashtra | 61 Colleges |
| Madhya Pradesh | 57 Colleges |
| Hyderabad | 54 Colleges |
| Karnataka | 50 Colleges |
| Delhi/NCR | 34 Colleges |
| Bangalore | 32 Colleges |
| Coimbatore | 31 Colleges |
| Kerala | 31 Colleges |
| Pune | 31 Colleges |
| Chennai | 30 Colleges |
| Andhra Pradesh - Other | 27 Colleges |
| Bhopal | 27 Colleges |
| Rajasthan | 25 Colleges |
| Guntur | 24 Colleges |
| Uttar Pradesh | 24 Colleges |
| West Bengal | 17 Colleges |
| Tamil Nadu - Other | 16 Colleges |
Specializations
VLSI Design offers diversified specialisations like Computer Science Engineering, Mechanical Engineering and Electronics & Communication Engineering. Refer the table below showing number of colleges offering each VLSI Design specialisation:
| Specialization Details | Colleges |
|---|---|
| Computer Science Engineering | 2273 Colleges |
| Mechanical Engineering | 1092 Colleges |
| Electronics & Communication Engineering | 826 Colleges |
| Structural Engineering | 810 Colleges |
| VLSI Design | 796 Colleges |
| Power Engineering | 785 Colleges |
| Electrical Engineering | 595 Colleges |
| Civil Engineering | 564 Colleges |
| Electronics Engineering | 555 Colleges |
| Communications Engineering | 389 Colleges |
| Artificial Intelligence & Machine Learning | 295 Colleges |
| Information Technology | 271 Colleges |
| Environmental Engineering | 250 Colleges |
| Construction Engineering | 248 Colleges |
| Industrial Engineering | 178 Colleges |
| Production Engineering | 178 Colleges |
| Transportation Engineering | 174 Colleges |
| Biotechnology Engineering | 160 Colleges |
| Embedded Systems & VLSI | 150 Colleges |
| Chemical Engineering | 146 Colleges |
Entrance Exams
GATE is the most popular exam accepted by VLSI Design in India. Refer to the table below showing exams accepted by number of colleges:
| Exam Details | Colleges |
|---|---|
| GATE | 539 Colleges |
| AP PGECET | 154 Colleges |
| CEETA | 95 Colleges |
| MHTCET MTech | 49 Colleges |
| TS PGECET | 47 Colleges |
| Karnataka PGCET | 41 Colleges |
| CUET-PG | 18 Colleges |
| KCET | 15 Colleges |
| TANCET | 8 Colleges |
| OJEE | 8 Colleges |
| WBUT PGET | 6 Colleges |
| JEE Main | 5 Colleges |
| VITMEE | 4 Colleges |
| COAP | 4 Colleges |
| GUJCET | 3 Colleges |
| GITAM GAT | 3 Colleges |
| AMIE Exam | 3 Colleges |
| IPU CET | 3 Colleges |
| PERA CET | 3 Colleges |
| JEE Advanced | 2 Colleges |
M.Tech in VLSI Design colleges in India
Commonly asked questions On M.Tech in VLSI Design colleges in India
Key highlights of VIT Vellore placements 2026 are mentioned below:
Particulars | Placement Statistics 2026 |
|---|---|
Highest package | INR 100 LPA |
Companies visited | 742 |
Students placed | 8,911 |
Super Dream Offers | 3,097 |
Dream Offers | 2,917 |
Total Offers | 10,071 |
Note: The above mentioned data are the combined data of all the 4 VIT Campuses.
No, to get admission into IIT Madras MTech course, students have to appear for the GATE exam. This is a part of minimum eligibility criteria for M.Tech course admissions. After clearing the GATE exam, the students are selected on the basis of merit list. The students have to obtain a minimum of 60% in their UG course to be eligiblr for admisison.
MTech is a two-year course divided into four semesters. SRM Institute of Technology Kattankulathur offers M.Tech in full-time mode in 27 specialisations and part-time in nine specialisations. M.Tech (full-time) specialisations are Automation and Robotics, Biomedical Engineering, Biotechnology, Chemical Engineering, Cloud Computing, Computer-Aided Design, Construction Engineering and Management, Electronics and Control Engineering, Embedded System Technology, Environmental Engineering, etc.
IIT Delhi has been ranked better than IIT Kanpur. Candidates can also look at the ROI calculated based on fee and average package offered to take a decision. The following table presents a comparison between the two institutes:
MTech Institutes | NIRF Ranking 2023 | Total Tuition Fee |
|---|---|---|
IIT Delhi | 2 | INR 3 Lacs - INR 8.7 lakh |
4 | INR 20,000 - INR 8 lakh |
NOTE: The fee mentioned above is taken from an unofficial source. Hence, is indicative.
Yes, NIT Trichy grants a wide range of scholarships as financial assistance to meritorious and various other category students. Students should fill the application form to secure the scholarship. This scholarship is available on the official website of the Institute. The decision regarding scholarships is made solely by the administration. NIT Tiruchirappalli provides scholarships like Adi-Dravidar Scholarship -Tamil, Adi-Dravidar Scholarship English SC/ST Scholarship, BC Scholarship, and others.
Commonly asked questions On M.Tech in VLSI Design colleges in India
IIT Kharagpur offers a joint MTech/ MCP PhD programme to students who have completed their UG degree in the relevant stream. Under this programme, at the end of the first year, interested students with a CGPA of 8.0 and above are eligible to appear for a written test and/or interview to check their suitability to enrol for PhD. Those who do not qualify for PhD can continue with their two-year MTech/MCP programme. Students selected for PhD will have to complete the two-year academic requirements of MTech/ MCP programme before enrolment for PhD. For these students, the MTech/MCP and PhD degrees will be awarded together upon successful completion of PhD. The programme is open to students of all categories with a Bachelor’s degree in Engineering/ Technology/ Architecture/ MSc or equivalent professional degrees (AMIE, etc.) with a valid GATE score.
IIT Hyderabad M.Tech fees is INR 2.63 Lacs in the academic year 2026. The aforementioned fees is charged from regular category students of IIT Hyderabad M.Tech course. However, for government sponsored students, the IIT Hyderabad M.Tech course fees is INR 3.75 lakh.
The aforementioned fees is charged on per semester basis in four instalments.
NIT Rourkela the highest package for 2025 placements is INR 62.44 LPA. A total of 1290 offers were made this year. Top recruiters of NIT Rourkela this year included Amazon, Deloitte and EY.
Yes, students who have taken admission to the Amrita School of Engineering Coimbatore M.Tech programme are required to submit project reports. The M.Tech curriculum requires all students to submit a minor and a major project in the seventh and eighth semesters, respectively. The topic of the projects must be relevant to the chosen specialisation.
The eligibility criteria to get admissions into MTech/ME courses at Thapar University are candidates must complete their BE/BTech/BSc/MSc degree in a relevant stream from a recognised university with a minimum aggregate of 60% (55% for reserved categories and industry-sponsored). Moreover, for the selection process, the university considers the scores of GATE followed by an interview process.
Note: In case the MSc is a qualifying exam, the vacant seats (if any) shall be filled on the basis of merit prepared by giving 50% weightage to BSc marks and 50% weightage to MSc marks (up to the end of the pre-final year). An overall minimum of 60% (55% for SC/ST/industry-sponsored) in MSc shall be required to be eligible for admission.
Commonly asked questions On M.Tech in VLSI Design colleges in India
The highest salary for M.Tech at DTU stood at INR 64 LPA for the academic year 2025. Other than the placements, DTU has been ranked 2nd position in the 'overall' category. In the 'University' category, it was ranked 42nd, while in the 'Engineering' category, it was ranked 30th. Hence, it is considered a good option for MTech. Further, as per the verified students’ reviews on Shiksha, the institute offers all the necessary amenities to the students. Hence, DTU can be considered a decent option for MTech.
The institute recorded an overall placement percentage of 62% during the academic year 2023-24. The IIT Guwahati highest package in 2025 stood at INR 1.25 crore per annum. The complete insight of IIT Guwahati placements between 2024 and 2025 are tabulated below:
Particulars | Placement Statistics (2024) | Placement Statistics (2025) |
|---|---|---|
Highest package | INR 2.05 Cr per annum | INR 1.25 Cr per annum |
Placement rate | 71% | 62% |
No. of students registered | 1,584 | 1,606 |
No. of students placed | 1,124 | 1,001 |
Companies participated | 466 | 260 |
PPOs offered | 229 | 193 |
The eligibility criteria for MTech course at the NIT Surathkal is that candidate should have passed BTech with a minimum of 60% aggregate from a recognised university. Aspirant should have the degree and mark sheets (original/copies) at the time of form filling and admission confirmation. The selection process include GATE + CCMT Counselling.
The applications are accepted by Jadavpur University in online mode. It is necessary that the application is submitted within the due date to be eligible for admission. Candidates seeking admission can follow the steps given below to fill out the application form for Jadavpur University admission:
Step 1: Visit the official website of Jadavpur University.
Step 2: On its homepage, click on ‘Admissions’ and further click on ‘Online Applications’.
Step 3: Read the admission guidelines carefully. Register by addressing details, including your course specifications, name, guardian details, mobile number, email ID, and address details.
Step 4: Click on ‘Submit’ once done. Conclude the application process by paying the application fee using a debit card/credit card/net banking.
Step 5: Take a screenshot of the application form for future use.
The GATE syllabus for Civil Engineering will help students enhance their exam preparations and plan their studies accordingly. Topics covered in Civil Engineering are structural analysis, design of concrete and steel structures, soil mechanics, foundation engineering, hydraulic engineering, hydrology, wastewater treatment, and transportation planning. It also consists of essential topics like probability and statistics, linear algebra, calculus, numerical methods, and differential equations.
Check the detailed syllabus provided below:
Section 1: Engineering Mathematics Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and Eigen vectors. Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, local maxima and minima; Taylor series, etc. Ordinary Differential Equation (ODE): First order (linear and non-linear) equations; higher order linear equations with constant coefficients; Euler-Cauchy equations, etc. Partial Differential Equation (PDE): Fourier series; separation of variables; solutions of one-dimensional diffusion equation, etc. Probability and Statistics: Sampling theorems; Conditional probability; Descriptive statistics Mean, median, mode and standard deviation, etc. Numerical Methods: Error analysis. Numerical solutions of linear and non-linear algebraic equations; Newtons and Lagrange polynomials, etc.
Section 2: Structural Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Frictions and its applications, etc. Solid Mechanics: Bending moment and shear force in statically determinate beams; Simple stress and strain relationships, etc. Structural Analysis: Statically determinate and indeterminate structures by force or energy methods; Method of superposition, etc. Construction Materials and Management: Construction Materials: Structural Steel Composition, material properties and behavior, etc. Concrete Structures: Working stress and Limit state design concepts, etc. Steel Structures: Working stress and Limit state design concepts; Design of tension and compression members, etc.
Section 3: Geotechnical Engineering Soil Mechanics: Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability, etc. Foundation Engineering: Sub-surface investigations - Drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories, etc.
Section 4: Water Resources Engineering Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum and energy equations and their applications, etc. Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes, etc. Hydrology: Hydrologic cycle, precipitation, evaporation, etc. Irrigation: Types of irrigation systems and methods; Crop water requirements, etc.
Section 5: Environmental Engineering Water and Waste Water Quality and Treatment: Basics of water quality standards Physical, chemical and biological parameters; Water quality index, etc. Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air quality standards, etc. Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, etc.
Section 6: Transportation Engineering Transportation Infrastructure: Geometric design of highways, etc. Geometric design of railway Track Speed and Cant. Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design. Highway Pavements: Highway materials - desirable properties and tests; Desirable properties of bituminous paving mixes, etc. Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data, etc.
Section 7: Geomatics Engineering Principles of surveying; Errors and their adjustment; Maps - scale, coordinate system; Distance and angle measurement - Levelling and trigonometric levelling, etc. Photogrammetry and Remote Sensing - Scale, flying height; Basics of remote sensing and GIS. For more detail visit: https://www.shiksha.com/engineering/gate-exam-syllabus
Commonly asked questions On M.Tech in VLSI Design colleges in India
No, IIT Dhanbad is yet to open the admissions for M.Tech courses in 2026. Usually, the institute beings accepting applications for M.Tech admissions from the month of March. Candidates usually get till mid April to submit their applications for the M.Tech course at IIT Dhanbad.
National Institute of Technology Warangal is a governmnet institute in Telangana. It is popularly known as NIT Warangal or NITW. It was earlier known as the Regional Engineering College. The institute has been ranked 28 by the NIRF Ranking 2025 under the 'Engineering' category & 63 in the overall "College" category. The highest package offered during placements was INR 64.3 LPA in 2025. Some of the top companies such as Amazon, Genpact, Accenture, HCL, etc. visited the campus. Overall, it is a very famous institute.
| Course | 2021 |
|---|---|
| M.Tech. in Computer Science and Engineering | 654 |
| M.Tech. in Communication System Engineering | 569 |
| M.Tech. in Mechanical Design | 640 |
| M.Tech. in Mechatronics | 667 |
| M.Tech. in VLSI and Embedded System | 641 |
The branch-wise placement rate recorded along-with the offers made and students registered during NIT Calicut MTech placements 2024 are presented below:
MTech Branch | Placement Rate (2024) | Total Offers (2024) | Total Students Registered (2024) |
|---|---|---|---|
CE MTech Environmental GeoTech | 23.80% | 5 | 21 |
CE MTech Offshore Structures | 94.73% | 18 | 19 |
CE MTech Structural Engineering | 92.30% | 24 | 26 |
CE MTech Traffic & Transportation Planning | 55% | 11 | 20 |
CE MTech Water Resources Engineering | 50% | 5 | 10 |
CH MTech Chemical | 100% | 2 | 2 |
CS MTech Computer Science | 79.16% | 19 | 24 |
CS MTech Computer Science (Information Security) | 80% | 16 | 20 |
EE MTech Power Systems | 83.3%3 | 10 | 12 |
EE MTech High Voltage Engineering | 75% | 3 | 4 |
EE MTech Instrumentation and Control Systems | 78.9%4 | 15 | 19 |
EE MTech Industrial Power and Automation | 75% | 6 | 8 |
EE MTech Power Electronics | 93.7%5 | 15 | 16 |
EC MTech Electronics Design and Technology | 88.88% | 16 | 18 |
EC MTech Signal Processing | 66.66% | 4 | 6 |
EC MTech Telecommunication | 90.90% | 10 | 11 |
EC M.Tech Micro Electronics & VLSI Design | 85.71% | 18 | 21 |
ME MTech Energy Engg. & Management | 72.72% | 8 | 11 |
ME MTech Industrial Engg. & Management | 47.36% | 9 | 19 |
ME MTech Machine Design | 70.58% | 12 | 17 |
ME MTech Material Science & Technology | 50.00% | 4 | 8 |
ME MTech Manufacturing Technology | 76.19% | 16 | 21 |
ME MTech Thermal Sciences | 91.30% | 21 | 23 |
NS MTech Material Science & Engineering | 75.00% | 3 | 4 |
Yes, pursuing an ME/MTech degree from LPU is a good choice for students interested in the field of Engineering and Technology.