UPES Dehradun Answered Questions

Hello Candidate, Hope you are in good health!It hard to say exactly the cutoff marks required for B Tech at the School of Petroleum Technology, Pandit Deendayal Petroleum University because it changes every year. But below we have mentioned the 2023 JEE Main last round cut-off for B Tech in Petroleum Engineering at the School of Petroleum Technology, Pandit Deendayal Petroleum University for every category which will give you an idea:General- 921311OBC- 920358SC- 904812ST- 921379Economically Weaker Section- 906774We hope this was helpful.Thank you

The School of Petroleum Technology is one of the four schools on the campus of Pandit Deendayal Petroleum University. The top course of the school depends on what you want to pursue. According to the college website the school offers B.Tech (B.Tech Programme in Petroleum Engineering, B.Tech Petrochemical Engineering and the DEPARTMENT OF BIOTECHNOLOGY), M.Tech (M.Tech Petroleum Engineering and M.Tech Petroleum Technology (Exploration)), & Ph.D programs to the students.The School of Petroleum Technology has amazing and experienced faculty and we advise you to go to the official website and research in depth the course you want to pursue as all the programs here are among the best.We hope this was helpful.Thank you

Yes, the School of Petroleum Technology, Pandit Deendayal Petroleum University have good placements.According to the 2023 placement report which you can find on the website of the School of Petroleum Technology, Pandit Deendayal Petroleum University the highest and average package offered was INR 38 LPA and INR 6.5 LPA respectively. Additionally, you will be happy to know that more than 450 students got the offer and 175+ companies took part in the placement drive. The top recruiters of the School in 2023 were Google, Amazon, JP Morgan, Reliance, Adani, ONGC, Reliance, MG, TATA, Accenture Technology, Infosys, Oil India Limited, Mahindra, Honeywell and many more. We hope this was helpful.Thank you

The eligibility criteria for B Tech at the School of Petroleum Technology, Pandit Deendayal Petroleum University is:- For admission as an All India Seat candidate and/or as NRI Sponsored candidate: A candidate should have secured a rank in Paper – 1 of JEE (Main) and the candidate should have passed the Qualifying Examination with a minimum of 45% marks (40% in case of SC / ST) in aggregate in theory and practical of Physics & Maths (with Chemistry or Biology or Computer or Vocational Subject) from a single board.- For admission as NRI Candidate: Candidate must have passed the qualifying examination abroad with a minimum 45% marks (40% in case of SC / ST) in aggregate in theory and practical of Physics, Chemistry, and Mathematics; and also must have passed: SAT Subject Tests (SAT II) of level-II Physics, Mathematics, & Chemistry or Andhra Pradesh tests at A-levels in Physics, Mathematics & Chemistry or Equivalent standard examination of United Kingdom (UK) education system in Physics, Mathematics, & Chemistry or JEE (Main) We hope this was helpful.Thank you

The admissions to the B.Tech programs at the School of Petroleum Technology, Pandit Deendayal Petroleum University is through a valid score in JEE Main.Take a look at the admission process to  the School of Petroleum Technology:- Government Seats (33%): For admission to Gujarat Seats, a candidate has to apply at ACPC (The Admission Committee for Professional Courses) as per ACPC norms. - All India Seats (52%): A candidate seeking admission on All India Seats shall apply online, on the University website, within the prescribed time limit. Fifty-two per cent of seats shall be filled by the University from the candidates who have passed the Qualifying Examination from the schools located in India (including Gujarat State) and have appeared in JEE (Main). The merit list for these seats shall be based on rank/marks obtained in JEE (Main).- NRI seats (15%): These Seats shall be filled by the University as NRI seats from the candidates who have passed the Qualifying Examination from the schools located in India (including Gujarat State) or abroad. Seats shall be filled as per merit based on rank/marks obtained in JEE (Main). There will be an online application form for admission to All India seats and NRI seats.For the MTech programme, admission is based on scores in GATE.Admission Process:A. Phase - I (Only for the candidates having qualified and valid GATE score): - Admission will be offered to the candidates on merit based on the GATE score. - The seats remaining vacant upon completing admissions of this Phase will be transferred to the seats for Phase II admissions. The candidates who are not offered admission during this Phase, of their application will be considered automatically for the Phase II admission process and they will have to appear at the selection procedure of the Phase II Admission Process mentioned herein. - All GATE-qualified candidates must upload the GATE Score Card as a part of the online application process. - The criteria for deciding merit order in case of candidates having equal merit marks shall be based on the following sequence namely: a. All India rank for GATE b. Marks out of 100 in GATE scorecard c. Aggregate marks / CPI of B. Tech. DegreeB. Phase - II (for GATE / Non-GATE candidates): The Phase - II admission process is meant for Non-GATE candidates and also for the candidates having a valid and qualified GATE score but not offered the admission during Phase - I; as mentioned hereunder: A single merit list will be prepared for valid and qualified GATE and Non-GATE candidates on the following basis:- Performance score obtained in Personal Interview by the candidate. - 50% weightage of GATE score (applicable to GATE-qualified candidates). A candidate who has applied for more than one branch has to appear in a Personal Interview for all the respective branches separatelyEligibility Criteria: Minimum 50% or CPI/CGPA of 5.5 in 10 point scale in the qualifying degree (recognized by the UGC/AICTE) as mentioned hereunder for admission in the M. Tech. program: M. Tech. (Petroleum Engineering): B. E. / B. Tech. in Petroleum Engineering / Hydrocarbon Refinery Engineering / Petrochemical Engineering / Mechanical Engineering / Chemical Engineering / Electrical Engineering / Geo Sciences Engineering PhD CourseAdmission to the PhD course is based on scores in the Research Aptitude Test (RAT) conducted by the UniversityFor the Doctoral Programme, PhD students are required to register and complete a minimum number of courses as per the PhD rules of the School.The candidate should have an M.Tech. degree in Petroleum / Mechanical / Chemical or M.Sc/M.Sc Tech in Geology /Geophysics.The Institute plans to establish full-fledged Research and development activities to solve operational problems of the Industry.We hope this was helpful.Thank youWe hope this was h

UPES School of Law offers several courses, including undergraduate, postgraduate, and doctoral programs. However, some of the top courses offered by the institute are:BA LLB (Hons.): The five-year integrated programme in BA LLB (Hons.) provides a comprehensive understanding of the legal field and is well-suited for those interested in a career in corporate law, IPR dispute resolution, constitutional law, and other related areasBBA LLB (Hons.): The five-year integrated programme in BBA LLB (Hons.) is designed for students interested in pursuing a career in business law and related fieldsLLB (Hons.): The three-year undergraduate programme in LLB (Hons.) covers a wide range of subjects, including constitutional law, criminal law, contract law, administrative law, and international lawLLM: The one-year postgraduate programme in LLM is designed for students who wish to specialize in a particular area of law, such as corporate law, IPR, energy law, and environmental lawUPES School of Law has been ranked among the top law schools in India

Hello Candidate, Hope you are in good health!Pandit Deendayal Energy University, formerly Pandit Deendayal Petroleum University has four schools on its campus and one of the school is the School of Petroleum Technology.The total seat intake is 120 students for the B Tech at the School of Petroleum Technology, Pandit Deendayal Petroleum University.We hope this was helpful. If you have more questions feel free to ask.Thank you

Hello Candidate,Hope you are in good health!We do not know the minimum cut-off as it changes every year.But below we have mentioned the 2023 JEE Main last round cut-off for B Tech in Petroleum Engineering at the School of Petroleum Technology, Pandit Deendayal Petroleum University for every category, so you can have an idea. Take a look at this:General- 921311OBC- 920358SC- 904812ST- 921379Economically Weaker Section- 906774We hope this was helpful.Thank you

The cutoff for UPES School of Law can be checked on the official website of the university.Additionally, websites such as Shiksha, ULSAT (University of Petroleum and Energy Studies Law School Admission Test) merit is the basis for determining the cutoff for UPES School of Law. The School of Law and the UPES cut off of CLAT AIR/LSAT India are the bases for admittance. Checking UPES School of Law's official website is advised to find out the precise cutoff.The eligibility criteria for admission to UPES School of Law for the BA LLB (Hons.) programme are as follows:Minimum aggregate marks: Candidates must have a minimum of 50% marks in Higher & Senior Secondary (10th & 12th).Entrance exam: Candidates need to appear for the ULSAT (University of Petroleum and Energy Studies Law School Admission Test) or CLAT (Common Law Admission Test).Rank in entrance exam: Candidates must secure a specific rank in the entrance exam, such as ULSAT (up to 15,000 ranks) or CLAT (up to 1500 ranks).LSAT percentile: Candidates must secure a minimum LSAT percentile (up to 60 percentile) 

It depends on the course you want to pursue. USCI offers more courses than the School of Petroleum Technology but they both B.Tech courses so let’s just compare them based on that.Take a look at this fee structure of the School of Petroleum Technology, Pandit Deendayal Petroleum University: - The tuition Fee (Per Semester) for All India and Gujarat Seats is INR 1,20,000 and for NRI/NRI Sponsored is $3,500 - University Enrolment Fee (Per Semester) for All India and Gujarat Seats is INR 3,000 and for NRI/NRI Sponsored is INR 3,000 - Library Deposit (Refundable) for All India and Gujarat Seats is INR 3,000 and for NRI/NRI Sponsored is INR 3,000- Security Deposit (Refundable) for All India and Gujarat Seats is INR 10,000 and for NRI/NRI Sponsored is INR 10,000 The total (inclusive of Rs.13,000 as refundable deposits) for All India and Gujarat Seats is INR 1,36,000 and for NRI/NRI Sponsored is *$3,500 + Rs.16,000Fees of USCI:B.Tech. in Computer Science and Engineering: INR 3.28 Lakhs B.Tech. in Computer Science and Engineering (Artificial Intelligence and Machine Learning):  INR 3.28 LakhsWe hope this was helpful.Thank you