Central Institute of Plastics Engineering and Technology Ahmedabad Vatva (G.I.D.C) Answered Questions

To get admission to the Central Institute of Plastics Engineering and Technology (CIPET) in Chennai for UG and PG courses, you must meet the following eligibility requirements:UG coursesYou must have passed 12th grade or its equivalent from Tamil Nadu, with a minimum of 50% marks. For reserved category candidates, the minimum is 45%. The maximum age limit for admission is 21 years. You must also apply for the TN Engineering counseling conducted by Anna University. Selection is based on merit and is done through the CIPET Joint Entrance Examination or Odisha Joint Entrance Examination (OJEE).  PG coursesFor the Post Diploma in Plastics Processing and Testing course, you must have a 3-year degree in Science with chemistry as one of the subjects.  CIPET is an autonomous organisation under the administrative control of the Department of Chemicals & Petrochemicals.  

The highest package offered at the Central Institute of Plastics Engineering and Technology (CIPET) in Chennai has been as high as 9.6 LPA. CIPET consistently achieves a placement record of over 90% for job placement, higher studies, and entrepreneurship.  

No, you cannot get admission to the Central Institute of Plastics Engineering and Technology (CIPET) in Chennai for a B.E. or B.Tech course without TNEA:  To get admission to CIPET, you must fill out the TNEA application form.  TNEA ranks candidates based on their scores in the qualifying exam.  Shortlisted candidates can participate in TNEA counseling and choose their preferences to get admission to CIPET.  Admission is based on the Tamil Nadu Engineering Admissions (TNEA) counseling guidelines.  The entry qualification for the B.E. or B.Tech course at CIPET is 10+2 with Physics, Chemistry, and Maths.

No, Central Institute of Plastics Engineering and Technology (CIPET) in Chennai does not offer 100% scholarships, but it does offer scholarships to some students:  ScholarshipDetailsAll India 1st Rank HolderReceives a scholarship of Rs. 12,000 per semesterOther scholarships30 candidates per semester are eligible for scholarships

The fees for courses at the Central Institute of Plastics Engineering and Technology (CIPET) in Chennai, India range from INR 50,000 to INR 200,000. Here are some course fees:  Diploma in Plastics Technology: The total tuition fee for this three-year course is INR 90,750.  PGD-PPT: The fee per semester for this course is INR 20,000.  PD-PMD with CAD/CAM: The fee per semester for this course is INR 20,000.  DPMT: The fee per semester for this course is INR 16,700.  DPT: The fee per semester for this course is INR 16,700.  In addition to the course fees, there are also other fees to consider, such as admission fees, caution deposits, and university registration fees.  

Some say that the faculty at the Central Institute of Plastics Engineering and Technology (CIPET) in Chennai is good and knowledgeable. Here are some reviews:  Good lecturersOne reviewer says that the lecturers are good and give their best to students.  Experienced facultyAnother reviewer says that there are many experienced faculty members who are open to teaching.  Pioneering facultyA reviewer says that the faculty who joined before 1995 were good and committed. 

{Source: UG Diploma students & alumni}Course Curriculum Structure for UG Diploma at Central Institute of Plastics Engineering and Technology, ChennaiThe course curriculum at Central Institute of Plastics Engineering and Technology, Chennai is structured into two fields - DPT (Plastics Processing) and DPMT (Plastics Moulding). Here's what we've learned from various reviews:* Theory Classes: According to several students, there are limited theory classes, which allows for a deeper understanding of concepts.* Practical Learning: Teachers focus on practical learning methods, making the course more hands-on and industry-focused.* Industry Exposure: Students get good industry exposure during their final semester, preparing them for real-world applications.* Two Fields Taught: The course covers two main fields - DPT and DPMT - providing students with a broad range of knowledge in plastics engineering.Overall, the course curriculum seems to emphasize practical learning, industry exposure, and a balanced blend of theoretical and applied knowledge.

{Source: B.E. / B.Tech students & alumni}Course Curriculum Structure at Central Institute of Plastics Engineering and Technology, AhmedabadThe course curriculum at Central Institute of Plastics Engineering and Technology, Ahmedabad is structured around the latest plastic production and testing technologies. Here's what we know:* Relevance: The course curriculum is designed to make students ready for the industry, with a focus on practical skills and knowledge.* Content: The curriculum covers various topics related to plastics engineering, including processing, testing, toolroom, and designing.* Teaching Methods: Teaching is done through both theoretical classes and practical sessions, often aided by projectors and hands-on experiments.* Assessment: Semester exams are conducted regularly, typically following the guidelines set by Gujarat Technical University.Note that while some faculty members may have limited availability due to government-related commitments, overall, the faculty-to-student ratio is relatively low at 2:60, allowing for individual attention.

{Source: B.E. / B.Tech students & alumni}General Overview* The college has a good reputation for providing industry-ready graduates in the field of plastics engineering.* Majority of the students (around 80-90%) get placed in reputed companies after graduation.Teaching and Curriculum* Teachers are knowledgeable, helpful, and experienced, with some having doctorates and Ph.D.s.* Course curriculum is relevant and focuses on practical skills, making students industry-ready.* Faculty members are available to clarify doubts and provide guidance.Facilities and Infrastructure* College has modern infrastructure, including labs, libraries, and hostels.* Spacious classrooms and lecture halls with projection facilities.* Digital library with access to online resources.* Hostel facilities are available with decent amenities, although food quality may vary.* Campus has a gymnasium, basketball court, and table tennis hall.Placement Records* The college has a good track record of placements, with top recruiters like Reliance, Dow Chemicals, and L&T.* Average salary package offered is between INR3-INR50 Lacs per annum.* Roles offered include quality controllers, supervisors, marketing analysts, and design engineers.Student Life* Cultural and symposium festivals are organized annually, showcasing talent from across the country.* Industry visits and guest lectures are arranged regularly to expose students to real-world scenarios.* Scholarship opportunities are available for meritorious and deserving students.However, some limitations mentioned by students and alumni include:* Limited availability of Wi-Fi connectivity.* Old infrastructure and maintenance issues in some areas.* Limited sports facilities and playground.Despite these limitations, overall, Central Institute of Plastics Engineering and Technology, Chennai seems to be a good choice for students looking to pursue a degree in plastics engineering.

{Source: B.E. / B.Tech students & alumni}Based on the feedback from students and alumni, here's a summary:Placements: * Almost 90% of students get placed in well-known organizations at a decent price (average package: 6-7 LPA). * the highest package offered: 1112 LPA, the lowest: 4.55 LPA. * Top recruiters include Adani Wilimar, Reliance, and Amul.Faculty and Curriculum: * Faculties are highly qualified (mostly MSc/PhD holders) and helpful. * Course curriculum is designed to prepare students for the industry. * Self-study is encouraged due to faculty involvement in government-related activities.Infrastructure: * Big and green campus with modern buildings. * Good infrastructure, including a library, Wi-Fi, auditorium, and lift facilities. * Cleanliness could be improved.Campus Life: * Not entirely satisfying, but manageable. * Limited recreational facilities, but adequate for studies.Teaching Style: * Faculty members are mostly knowledgeable and supportive. * Average teaching quality, with some exceptional professors. * Emphasis on theoretical concepts, with minimal hands-on training.In conclusion, Central Institute of Plastics Engineering and Technology, Ahmedabad appears to offer good academic programs, reliable placements, and decent infrastructure. However, students may face challenges in terms of cleanliness and limited recreational facilities. Overall, it's a suitable option for those interested in pursuing a career in plastics engineering.