4 Photos
Central Institute of Plastics Engineering and Technology, Lucknow Courses & Fees 2026: UG, PG, After 10th Courses
- Public/Government Institute
- Estd. 1986
Last updated on 25 May '26
3.6
3.6
3.9
3.3
3.5
A
Anonymous
B.Tech. in Manufacturing Technology - Batch of 2025
1.8
There is no placement. So don't take this college; go for better options.
Placements: The condition of placement here is very bad; if you have even one backlog, placement will not happen. KN Upadhyaya was in charge; he also left. So the college is totally the worst. The college does not provide any internships. But they ask for internship certificates.
Infrastructure: There is no Wi-Fi facility for students, and the water is very bad. The bathroom is very dirty. The room is not so clean. Rooms are very bad, and there's no cleaning in the hostel. Food quality is very bad. There is no hygiene. A mess full of bad odors. Mess workers are very unhygienic.
Faculty: Teaching quality is very low. Teachers are very rude and arrogant. Also, the semester exam is very hard. Even though the course is not so good, they do not run labs; they only run labs for the name's sake. They do not have any proper equipment and facilities, which is very rude. In short, they do not make students industry-ready.
Other: I chose this because my dad said, "Go and study in CIPET." Event quality is very low. The campus is not attractive.
Reviewed on 14 Mar 2024Read More
(1) 1 person found this helpfulA
Ayush Shukla
Diploma in Plastic Mould Technology - Batch of 2023
5.0
The college is very good.
Placements: There are almost 100% placements from every branch. There are some subjects about entrepreneurship and management too. The minimum package is 5 LPA. The top recruiters are GAIL, MOTHER SONS, SUPREME, etc.
Infrastructure: The infrastructure of the college is very friendly and the facilities are very helpful. There is a huge workshop for practice and there is no restriction to conduct labs and workshops. There is a very supportive staff.
Faculty: The teachers are very helpful and well educated. The knowledge of faculty is good and they are very supportive. There is no restriction to ask questions. There are two mid-term exams in a semester. The college is autonomous so the semester exams are so easy.
Other: There are two options, one is Plastic Engineering and second is mould design. Every year, a fest done by senior for freshers.
Reviewed on 9 Sep 2022Read More
D
DEEPAK KUMAR
Diploma in Plastic Mould Technology - Batch of 2022
5.0
One of the best colleges in India. Absolutely satisfied with the faculty and placements.
Placements: 100% of students were placed in my course. 50000 is the highest package in our course. Companies like Tata and Infosys are top recruiting companies for our course. Minimum 40% of students got internship.
Infrastructure: Wi-Fi, labs, classrooms, and library are available for our course/department. The facilities in our hostel are pretty good and quality food is available in the mess and canteen. The college has medical and sports and games facilities.
Faculty: Teachers are helpful, qualified, and knowledgeable. Last semester exams were difficult and 40% is the pass percentage.
Other: Events and activities are organized in the college.
Reviewed on 10 Jul 2022Read More
View more 12 Reviews
Central Institute of Plastics Engineering and Technology, LucknowWhat's new?
For All Courses
Change
The JEE Main 2026 session 2 result has been announced on the official website for Central Institute of Plastics Engineering and Technology, Lucknow admission to the BTech, BArch and BPlan courses.
A few more updates are given below:
- The UPTAC 2026 counselling registration process has commenced for admission to the BTech and Integrated BTech courses. The last date to register is Jun 15, 2026. Further, the round 1 seat allotment results will be out on Jun 27, 2026.
Central Institute of Plastics Engineering and Technology, Lucknow Overview
Table of contents- Central Institute of Plastics Engineering and Technology, Lucknow Courses and Fees 2026
- Central Institute of Plastics Engineering and Technology, Lucknow Fee Structure
- Central Institute of Plastics Engineering and Technology, Lucknow Admission dates 2026
- Central Institute of Plastics Engineering and Technology, Lucknow All programs
- Central Institute of Plastics Engineering and Technology, Lucknow All courses
- Central Institute of Plastics Engineering and Technology, Lucknow Student reviews
- Central Institute of Plastics Engineering and Technology, Lucknow Admission FAQs
Central Institute of Plastics Engineering and Technology, Lucknow Courses and Fees 2026
Central Institute of Plastics Engineering and Technology, Lucknow offers many different courses to students wanting to get admission. Aspirants can pursue both UG and PG levels course depending on their qualifications and academic requirements. The courses available at Central Institute of Plastics Engineering and Technology, Lucknow are B.E. / B.Tech and M.E./M.Tech, etc. Students can choose any course and specialisation. Students can refer to the table given below for course details.
| Courses | Tuition Fees | Eligibility |
|---|---|---|
B.E. / B.Tech(4 courses) | 1.6 L - 2.4 LGet Fee Details | |
After 10th Diploma(3 courses) | 75 KGet Fee Details | |
M.E./M.Tech(1 course) | 1.3 LGet Fee Details | – / – |
Commonly asked questions On Fees and Eligibility
Q: Is it worth to consider Central Institute of Plastics Engineering and Technology, Lucknow as a good Institute?
A:
Central Institute of Plastics Engineering and Technology, Lucknow is a reputed institute for B.Tech, M.E./M.Tech, After 1th Diploma. Students can opt these programs to pursue their career in Engineering. Institute has trained & experienced faculty who deliver these programs. As per Shiksha verified reviews, Central Institute of Plastics Engineering and Technology, Lucknow has a rating of 3.5 on the basis of reviews by students. Not just this, it has also been rated 3.3 on campuslife, 3.4 on placements, 3.9 on faculty and 3.8 on Infrastructure.
Q: Which courses does Central Institute of Plastics Engineering and Technology, Lucknow offer to students?
A:
Central Institute of Plastics Engineering and Technology, Lucknow has courses such as B.Tech, M.E./M.Tech, After 1th Diploma to offer. These courses are in the stream of Engineering. Central Institute of Plastics Engineering and Technology, Lucknow has specializations such as B.Tech specializations in Polymer Technology.
Q: How much is the intake across all courses being offerred at Central Institute of Plastics Engineering and Technology, Lucknow?
A:
The overall seats available across all courses offered by Central Institute of Plastics Engineering and Technology, Lucknow is up to 498. Good thing to know is that Central Institute of Plastics Engineering and Technology, Lucknow has courses which are approved by prominent Government bodies like AICTE.
Central Institute of Plastics Engineering and Technology, Lucknow Fee Structure
Central Institute of Plastics Engineering and Technology, Lucknow fee structure includes tuition fee, hostel, fee, registration fee, etc. The course fee is INR 75,000 - 2,44,800. The given fee is taken from official website and is still subject to change. The course-wise Central Institute of Plastics Engineering and Technology, Lucknow fees are tabulated below:
| Course Name | One-Time Fee | Tuition Fee | Hostel Fee |
|---|---|---|---|
| B.E. / B.Tech | -/- | INR 1,65,000 - 2,44,800 | -/- |
| M.E./M.Tech | -/- | INR 1,28,000 | -/- |
| After 10th Diploma | -/- | INR 75,000 | -/- |
Commonly asked questions On Fees Breakdown
Q: What are the different job profiles offered to an M.Tech graduate?
A:
After completing MTech, a candidate can easily find a job in research and development companies, manufacturing firms, and IT companies as Project Manager, Research Associate, and Senior Engineers. Some of the candidates also prefer academic jobs such as teaching in a college or becoming a professor. Candidates can also work as Lead Scientist, Lead Engineer and also work as consultants in popular organisations.
Know more about -
Q: Does Central Institute of Plastics Engineering and Technology, Lucknow provide good placement facilities?
A:
Central Institute of Plastics Engineering and Technology, Lucknow has been rated 3.4 on placements.
Central Institute of Plastics Engineering and Technology, Lucknow Admission dates 2026
B.E. / B.Tech Admissions 2026
4 Courses3 years-4 years
Eligibility- 10+2 with 45% aggregate
- Accepting Exams: UPTAC, JEE Main
Important dates| Dates | Events |
|---|---|
25 May '26 - 15 Jun '26 | UPTAC 2026 BTech Registration, Payment of Fee, Document UploadOngoing |
4 May '26 - 15 Jun '26 | UPTAC Counselling 2026 Registration for Special Round 1Ongoing |
28 May '26 - 20 Jun '26 | UPTAC Counselling 2026 Document VerificationOngoing |
Admission Details for all courses
Central Institute of Plastics Engineering and Technology, Lucknow All programs
Filter
Streams
Course
Mode of Study
Specialization
5 More
Showing 4 Programs
Central Institute of Plastics Engineering and Technology, Lucknow All courses
Showing 9 Courses
120
- – / –
– / –
– / –
Commonly asked questions On All Courses
Q: How can I get into Central Institute of Plastics Engineering and Technology, Lucknow for UG/PG courses? Am I eligible for admission?
A:
Central Institute of Plastics Engineering and Technology, Lucknow has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| B.E. / B.Tech | Candidate must have passed Diploma in relevant stream from a recognised Institute. |
| After 10th Diploma | Candidate must have passed 10th examination from a recognised board. |
Q: What facilities are there at Central Institute of Plastics Engineering and Technology, Lucknow in terms of infrastructure?
A:
Central Institute of Plastics Engineering and Technology, Lucknow has been rated 3.8 on Infrastructure parameter.
Central Institute of Plastics Engineering and Technology, Lucknow has also been rated 3.3 for Campuslife.
Q: Does Central Institute of Plastics Engineering and Technology, Lucknow has good and experienced faculty?
A:
Central Institute of Plastics Engineering and Technology, Lucknow has been rated 3.9 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.
Recommended Colleges
Explore popular similar colleges
Students who showed interest in Central Institute of Plastics Engineering and Technology, Lucknow - B.Tech also showed interest in
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Confused about which college or exam to opt for?
- Chat with our counselor
- Get your personalised list of colleges & exams matching your preferences
View allCollections
Is this recommendation relevant?
A
Aditya sinhj
B.Tech. in Plastic Engineering - Batch of 2021
3.6
4.0Placements3.0Infrastructure4.0Faculty3.0Crowd & Campus Life4.0Value for Money
Our college has good infrastructure and facilities.
Placements: About 70% of students were placed. The top recruiters are Tata, Reliance, Suzuki, etc. Students got internships in Karam, Suzuki, etc. The percentage of students getting internships at our college is 50%. The role of our course is to provide a use for plastic in a recyclable use.
Infrastructure: The Central Institute of Plastic and Petrochemical Engineering has all the facilities and infrastructure, such as a Wi-Fi lab, smart classes, and a library. The quality of facilities in our hostel is very much better than any other college. They provide good food.
Faculty: Teachers of the Central Institute of Plastic and Petrochemical Engineering are highly educated and knowledgeable. The course curriculum is relevant. The semester exam is harder. The passing percentage in one semester is 50%.
Reviewed on 13 Jun 2022Read More
Ankit Patel
B.Tech. in Plastic Engineering (Lateral Entry) - Batch of 2023
3.6
3.0Placements4.0Infrastructure3.0Faculty3.0Crowd & Campus Life5.0Value for Money
It is a good college for getting placements.
Placements: Every year, around 40% of students in the B.Tech PE branch are placed. The highest salary package offered by Reliance is 8 LPA, where five students were placed this year. Until now, around 25% to 30% of students have been placed, with an average salary package of Rs. 35,000 per month. The top recruiting companies are Amul, Reliance, Lohiya Kanpur, KPL Kanpur, Lumex, Bhuj, Panasonic, etc. Mostly, students get positions as engineers in research and development, production, quality, etc.
Infrastructure: The buildings are good, but the college area is very small for engineering students, although the view from the outside is good. Free Wi-Fi is available. Hostels are average, and the food provided is also average. The girls' hostel is good. The classrooms are average with projectors, and there is an elevator that we can use. There are two auditoriums. One is an open auditorium, and the second is an insider auditorium.
Faculty: Most teachers are Ph.D. holders and have good skills for teaching. They have a helpful nature with all types of problems, but not all; we can personally ask them any doubts. They also give average or good internal grades and provide some tips for getting good grades on the final exam. The passing percentage is about 80% to 90%.
Other: I have done my diploma in this branch, and I know the scope of this industry. That's why I chose to do my B.Tech. Plastic engineering has more scope than other branches.
Reviewed on 15 Apr 2022Read More
(1) 1 person found this helpfulR
Raghav Parashar
B.Tech. in Plastic Engineering - Batch of 2020
4.0
4.0Placements4.0Infrastructure4.0Faculty4.0Crowd & Campus Life4.0Value for Money
Satisfied with good environment.
Placements: 75%+ campus and off campus placement but due to covid less of college placement that year. The highest package offered is 11.50 lpa, average 4.50+ lpa and the lowest is 2.40+ lpa.
Denso, Honda, Maruti Suzuki, Amul etc. are the top recruiters.
90% internship offered by the companies Kingfa, Rajoo, RDSO, Amul, SRF etc.
Production and marketing job roles were offered.
Infrastructure: College campus is fully Wi-Fi equipped.
Fully specialised library and very good labs and very big workshop
Now we talk about college infrastructure. It is newly built building.
Canteen is available from 9 to 5 p.m.
Medical for hostlers, sports and games is also available.
Faculty: Teacher and faculty are very well qualified.
The teaching ability is good.
Teachers are qualified with their preferred subject.
The semester is hard. If you prepared for the exam then you can easily pass in the semester.
The pass percentage is 70% from each batch.
Other: I chose this college according to my UPSEE rank easy course, affordable government link up college, only a single college of plastics in all Uttar Pradesh.
Teachers and students relation should improve in this college.
There are so many events like sports event, capoira, fresher party, annual party, conference, industrial visits etc.
Reviewed on 29 Jan 2022Read More
P
Pradhumn Rajput
B.Tech. in Plastic Engineering - Batch of 2019
3.2
3.0Placements3.0Infrastructure4.0Faculty3.0Crowd & Campus Life3.0Value for Money
It is a good college with 78% placements in 2019 and has above average infrastructure & facilities.
Placements: Almost 78% of students got placed in our course. The highest salary package offered was 6.5 LPA, and the lowest salary package offered was 2.3 LPA. The average salary package offered was 3 LPA. Top recruiting companies were Honda, Uno Minda, Lohia Corp., Timex, Relax, Finolex, Sterlite Tech, Motherson, etc. About 85% of students got internships from our course in companies like Lohia, Timex, Relax, Minda, Finolex, Supreme, etc. Top roles offered in our course are production manager, plant head, supervisor, maintenance engineer, polymer engineer, lab inspector, etc.
Infrastructure: The campus can heles are Wi-Fi equipped. We have well-equipped labs, and classrooms with more than 150 gatherings with projectors, a library, canteen, auditorium, amphitheater, etc. The quality of the hostel is above average, and the food served in the mess is decent. Medical facility is good, whereas sports and games are conducted from time to time.
Faculty: Teachers are highly qualified and knowledgeable. The teaching quality is good. This course curriculum is more focused on practical skills than theory, this includes theoretical subjects, labs for practical, machines, and workshops. It does make students industry-ready as the college provides industry knowledge to students for their technical and survival aspects. Exams are not that difficult if studied regularly. The pass percentage was 40%.
Other: This course has scope for polymer and plastic industries. The best things are the number of opportunities which one can get. Some things could be better as the curriculum should be slightly improved as it feels long for me, there should be more attention in practice than theory. There are many events that our college conducts to aware people of plastics, cultural fests, connectivity to campus is good, scholarships are also available, and many extracurricular activities are also there.
Reviewed on 10 Dec 2021Read More
G
Gaurav Tripathi
B.Tech. in Plastic Engineering - Batch of 2024
4.2
4.0Placements4.0Infrastructure5.0Faculty4.0Crowd & Campus Life4.0Value for Money
Our college is good in every aspect with good placements and nice teachers. Everything is good.
Placements: There are average placements here. The highest salary package offered in the year 2019 was 9 LPA. There are diploma courses also as there is a B.Tech course with two branches, i.e., plastic engineering and manufacturing technology. Both the branches are good. Many students are studying here, and they all are satisfied with their faculty members, subjects, etc.
Infrastructure: The boys' hostel is not in a way as it should be, or it is of average type. However, the girls' hostel is superb. Wi-Fi is available in the hostel and even in classrooms. There is always a real-life situation of every topic, and classrooms are also nice and have proper seats. There is also a library in which you can get all subjects' books.
Faculty: Faculty members are good here, and they help every student. Semester exams are very tough because of the online mode. The teaching quality of teachers is very good, and they always start teaching the topic with basics. They always ask if you have any doubts or not and check all doubts of every student at any point.
Other: I chose this course because it is not as crowded as other courses. Now, the demand for plastic in every field is growing day by day.
Reviewed on 23 Jul 2021Read More
Photos
Confused about which college or exam to opt for?
- Chat with our counselor
- Get your personalised list of colleges & exams matching your preferences
Central Institute of Plastics Engineering and Technology, Lucknow Admission FAQs
Q: Which major specializations are available at Central Institute of Plastics Engineering and Technology, Lucknow?
A:
Central Institute of Plastics Engineering and Technology, Lucknow offers Degree and Diploma courses including 4 UG and 1 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Central Institute of Plastics Engineering and Technology, Lucknow has specializations such as B.Tech specializations in Polymer Technology.
Central Institute of Plastics Engineering and Technology, Lucknow
Student Forum
Anything you would want to ask experts?Content authored by:
Hemansh Bhardwaj
Updated on May 25, 2026
Central Institute of Plastics Engineering and Technology, LucknowTake a look at Campus
Header Image
Campus Entrance
Academic Block
Campus BuildingCentral Institute of Plastics Engineering and Technology, Lucknow News & Updates
Latest
Popular
Satyendra Singh · Jun 11, 2026
2.4L views
Satyendra Singh · Jun 11, 2026
7.4L views · 12 comments
Satyendra Singh · Jun 11, 2026
8.4L views · 28 comments
Saakshi Varsha Lama · Jun 11, 2026
8.3K views
Vikrant Shukla · Jun 10, 2026
11.1K views
Central Institute of Plastics Engineering and Technology, LucknowContact Information
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Lucknow
- All About Central Institute of Plastics Engineering and Technology, Lucknow
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Lucknow Faculty
- Compare Central Institute of Plastics Engineering and Technology, Lucknow
- Central Institute of Plastics Engineering and Technology, Lucknow Q&A
Explore Courses at similar colleges
- Crescent College
- Central Institute of Plastics Engineering and Technology, Ahmedabad
- CIPET Bhubaneswar
- PVPIT Pune
- Madras Institute of Technology
- Central Institute of Plastics Engineering and Technology, Chennai
- GNIOT Greater Noida
- Rajarshi Rananjay Sinh Institute of Management and Technology (RRSIMT)
- Central Institute of Plastics Engineering and Technology, Jaipur
- Indian Institute of Handloom Technology,Varanasi