B.Tech. in Manufacturing Technology
1.7 /5- Public/Government Institute
- Estd. 1986
2.0
2.5
2.0
1.0
1.0
A
Anonymous
B.Tech. in Manufacturing Technology - Batch of 2025
1.8
There is no placement. So don't take this college; go for better options.
Placements: The condition of placement here is very bad; if you have even one backlog, placement will not happen. KN Upadhyaya was in charge; he also left. So the college is totally the worst. The college does not provide any internships. But they ask for internship certificates.
Infrastructure: There is no Wi-Fi facility for students, and the water is very bad. The bathroom is very dirty. The room is not so clean. Rooms are very bad, and there's no cleaning in the hostel. Food quality is very bad. There is no hygiene. A mess full of bad odors. Mess workers are very unhygienic.
Faculty: Teaching quality is very low. Teachers are very rude and arrogant. Also, the semester exam is very hard. Even though the course is not so good, they do not run labs; they only run labs for the name's sake. They do not have any proper equipment and facilities, which is very rude. In short, they do not make students industry-ready.
Other: I chose this because my dad said, "Go and study in CIPET." Event quality is very low. The campus is not attractive.
Reviewed on 14 Mar 2024Read More
JR
Jyoti Rawat
B.Tech. in Manufacturing Technology - Batch of 2018
1.6
2star college and 1star facilities.
Placements: Total 4 students got placed. The highest salary package was 4.5 lacs PA from Lohia Pvt ltd. and the lowest package was 2lacs PA. Avg salary package that has been offered is 2.5 lacs. Top recruiting company was Lohia lmt. Which came for plastics but somehow 1mt student also got placed. No one got internship from my batch.
Infrastructure: Infrastructure of college was just okay. There was no lift facility for pregnant faculty members. Canteen was oven of our college. You can't get more than bun butter chain and cold drink. There was lunch facility also 40/- per meal which was okay. In first semester we stayed at some other college girls hostel which was at a distance of 4 KM's from college. Within a semester we have to leave that hostel without any backup. Although college have very good hostel but it's for boys And girls need to find their stay. In the end of 2017 finally college constructed a brand new girls hostel but in that food was not cooked. Food used to get cooked in boys hostel after that they deliver the food in girls hostel for serving. There was no medical facilities. If something happens college faculty never received the call which causes the delay in treatment. There was no support from college in sports. 3rd year used to conduct sports fest named-capoeira by contribution of college students. The certificates, medals each and every expense was handled by third year students.
Faculty: Our maths faculty Keerti maam. She was super awesome in her knowledge the way she taught us. Everything was super awesome. Else everyone was just okay and wastage of time. There was nothing in labs for practical. So how can students be ready for industry.
Other: I choose this college because of semi government. Tag. Each and every fest, activities cost our pocket. So it was fun but never pocket friendly. College should also play some role in these type of activities. It's about 2 years now still we haven't received our caution money.
Reviewed on 28 Feb 2020Read More
View more 2 Reviews
B.Tech. in Manufacturing Technology
Table of contents
- Overview
- Fees
- Student Reviews
- Entry Requirements
- Admission Process
- + 1 more item
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Overview
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
Central Institute of Plastics Engineering and Technology, Lucknow offers a 4 years B.Tech. in Manufacturing Technology course at the UG level. A total of 60 students can enrol in this course. The total tuition fee for the entire duration of this course is INR 2,44,800. Find out more about other courses under Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech.
Total Tuition Fees | ₹2.45 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Seat breakup | 60 |
Type of University | Public/Government |
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Fees
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
The total tuition fee for Central Institute of Plastics Engineering and Technology, Lucknow B.Tech. in Manufacturing Technology is INR 2,44,800. Besides, the fee also includes other components, such as exam fee, caution deposit, enrollment fee, etc. Some of the fee components, such as caution deposit are one-time payable. Candidates after getting admission in B.Tech. in Manufacturing Technology need to pay the Central Institute of Plastics Engineering and Technology, Lucknow fee to confirm their seat in the institute. Below is fee breakup for Central Institute of Plastics Engineering and Technology, Lucknow B.Tech. in Manufacturing Technology:
| Fee components | Amount (4 years) |
|---|---|
The mentioned fee is as per AFRC UP. | ₹ 2.45 Lakh |
₹ 2.45 Lakh |
These are based on information available on various sources. Latest values may differ.B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Frequently Asked Questions
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Students Ratings & Reviews
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
1.7/5
2 Verified Reviews- 1-22
Placements2.0
Infrastructure2.5
Faculty & Course2.0
Campus Life1.0
Value for Money1.0B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Students also asked
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
Download exam sample paper
JEE Main
JEE Main
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Entry Requirements
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
General
SC
ST
Requirements for 12th grade
- 45%
- Read moreCandidate must have passed 10+2 examination and Obtained at least 45% marks (40% marks in case of candidates belonging to SC/ST category) in the subjects taken together. Subjects (Compulsory Required)-Physics and Mathematics Subjects (At least One from list)-Chemistry/ Bio Technology /Biology/ Technical Vocational subject.
UPTAC
JEE Main
Other eligibility criteria
Candidate must have passed class 12th or equivalent by the AIU or Intermediate or 2-year Pre-University exam conducted by a recognized Board/ University with Physics and Mathematics as compulsory subjects along with one of the Chemistry/Biotechnology/Biology/ Technical Vocational subject.
Candidates must have passed class 12th/equivalent examination in 2023, 2024 or appearing in 2025.
There is no age limit for the candidates.
Candidate with below mentioned eligibility are also eligible:
Final examination of the 2-year course of the Joint Services Wing of the NDA.
SSC Examination conducted by the NIOS with a minimum of 5 subjects.
A Diploma recognized by AICTE or a State board of technical education of at least 3 year duration.
2024 onwards Dr. APJ Abdul Kalam Technical University (AKTU), Lucknow will be using the score sheet of JEE (Main) for admission instead of UPCET (Earlier UPSEE).
For more detail, visit - https://jeemain.nta.nic.in/eligibility-criteria/
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Admission Process
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
Important Dates
ALL
JEE MAIN
UPTAC
Jul 13 - 16, 2026
UPTAC Counselling 2026 Online Choice Filling and Locking - Round 1
Jul 16, 2026
JEE Main counselling round 5 allotment
Jul 18, 2026
UPTAC Counselling 2026 Seat Allotment (For JEE Candidates Only)- Round 1
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Cutoffs
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
3Gender
Quota
Category
JEE Main round-wise cutoff Rank: (General-All India)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 1 | 1031326 | 1069603 | - |
| 2 | 244903 | - | - |
| 6 | - | - | 2018199 |
| 7 | - | - | 2113310 |
JEE Main round-wise cutoff Rank: (General-Home State)
| Round | 2025 |
|---|---|
| 1 | 513041 |
| 2 | 1133544 |
JEE Main round-wise cutoff Rank: (OBC-All India)
| Round | 2023 |
|---|---|
| 1 | 1031326 |
| 2 | 244903 |
UPTAC round-wise cutoff Rank: (General-All India)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 1 | 1031326 | 1069603 | - |
| 2 | 244903 | - | - |
| 6 | - | - | 2018199 |
| 7 | - | - | 2113310 |
UPTAC round-wise cutoff Rank: (General-Home State)
| Round | 2025 |
|---|---|
| 1 | 513041 |
| 2 | 1133544 |
UPTAC round-wise cutoff Rank: (OBC-All India)
| Round | 2023 |
|---|---|
| 1 | 1031326 |
| 2 | 244903 |
UPCAT round-wise cutoff Rank: (General-All India)
| Round | 2018 | 2020 |
|---|---|---|
| 1 | 55818 | 72313 |
| 2 | - | 65026 |
| 3 | - | 62800 |
| 4 | - | 62800 |
UPCAT round-wise cutoff Rank: (General-Home State)
| Round | 2018 |
|---|---|
| 1 | 55818 |
UPCAT round-wise cutoff Rank: (OBC-All India)
| Round | 2018 | 2020 |
|---|---|---|
| 1 | 88008 | 72313 |
| 2 | - | 65026 |
| 3 | - | 62800 |
| 4 | - | 62800 |
UPCAT round-wise cutoff Rank: (OBC-Home State)
| Round | 2018 |
|---|---|
| 1 | 88008 |
Explore Courses offered by Central Institute of Plastics Engineering and Technology, Lucknow
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Plastics Engineering and Technology, Lucknow
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from Central Institute of Plastics Engineering and Technology, Lucknow
Read ReviewsCompare Courses From Similar Colleges
Similar courses in the same city
₹4.81 L
Overall Rating3.7
3.7₹4.4 L
Overall Rating3.2
3.2B.Tech. in Computer Science and Engineering
Offered by Institute of Engineering and Technology (IET), Dr. A.P.J. Abdul Kalam Technical University₹3.4 L
Overall Rating3.8
3.8₹6.4 L
Overall Rating3.9
3.9₹5.62 L
Overall Rating3.9
3.9– / –
Overall Rating3.0
3.0₹6.08 L
Overall Rating3.6
3.6– / –
Overall Rating1.8
1.8
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in LucknowCentral Institute of Plastics Engineering and Technology, LucknowCoursesB.Tech. in Manufacturing TechnologyB.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow News & Updates
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
Latest
Popular
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Lucknow Contact Information
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Lucknow
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Lucknow
- All About Central Institute of Plastics Engineering and Technology, Lucknow
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Lucknow Faculty
- Compare Central Institute of Plastics Engineering and Technology, Lucknow
- Central Institute of Plastics Engineering and Technology, Lucknow Q&A
Know more about Programs
- Engineering
- B Tech (Bachelor of Technology)
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering