B.Tech. in Civil Engineering
at Gate Institute of Technology and Sciences, Nalgonda

Private Institute
Estd. 2008

B.Tech. in Civil Engineering

Table of contents

Overview
Fees
Entry Requirements
Admission Process
Cutoffs

B.Tech. in Civil Engineering
at
Gate Institute of Technology and Sciences
Overview

A 4 years B.Tech. in Civil Engineering course is offered at UG level by Gate Institute of Technology and Sciences. The tuition fee of B.Tech. in Civil Engineering is INR 4,00,000 for the entire course duration. The Gate Institute of Technology and Sciences B.E. / B.Tech have a seat intake of 30 students. Students can get admission related information regarding Gate Institute of Technology and Sciences B.Tech. in Civil Engineering on this page. In addition, Gate Institute of Technology and Sciences courses have industry-oriented syllabus for better placement opportunities. Check out the various Gate Institute of Technology and Sciences B.E. / B.Tech courses.

Total Tuition Fees	₹4.00 Lakh Get Fees details
Duration	4 years
Course Level	UG Degree
Mode of Course	Full Time
Seat breakup	30
Type of University	Private

B.Tech. in Civil Engineering
at
Gate Institute of Technology and Sciences
Fees

Gate Institute of Technology and Sciences B.Tech. in Civil Engineering fee structure is obtained by collating various components such as the Tuition Fees, One-Time Fees, Registration Fees, Exam Fees, etc. The total expenset may vary, depending on the additional charges of the Gate Institute of Technology and Sciences. The total tuition fees of B.Tech. in Civil Engineering is INR 4,00,000. Tabulated below are more details about Gate Institute of Technology and Sciences B.Tech. in Civil Engineering fee breakup:

Fee components

Amount (4 years)

Tuition Fees

Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary. The fees might include components other than tuition fees. Mentioned fee is as per Telanagana State Council of High

₹ 4.00 Lakh

Total fee

₹ 4.00 Lakh

These are based on information available on various sources. Latest values may differ.

B.Tech. in Civil Engineering
at
Gate Institute of Technology and Sciences

Frequently Asked Questions

Q: Which courses does Gate Institute of Technology and Sciences offer to students?

Gate Institute of Technology and Sciences has courses such as M.E./M.Tech, B.Tech, MBA/PGDM, After 1th Diploma to offer. These courses are in the stream of Engineering, Business & Management Studies. Gate Institute of Technology and Sciences has specializations such as M.E./M.Tech specializations in Computer Science Engineering, Environmental Engineering, Power Engineering, B.Tech specializations in Civil Engineering, Computer Science Engineering, Electronics & Communication Engineering, Mechanical Engineering, Mining Engineering, Agriculture & Farm Engineering, Biotechnology Engineering, Pharmaceutical engineering, After 10th Diploma specializations in Civil Engineering, Mechanical Engineering, Mining Engineering, Agriculture & Farm Engineering.

Got more queries?

AskShikshaGPT on App

Q: Which major specializations are available at Gate Institute of Technology and Sciences?

Gate Institute of Technology and Sciences offers Degree and Diploma courses including 12 UG and 6 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Gate Institute of Technology and Sciences has specializations such as M.E./M.Tech specializations in Computer Science Engineering, Environmental Engineering, Power Engineering, B.Tech specializations in Civil Engineering, Computer Science Engineering, Electronics & Communication Engineering, Mechanical Engineering, Mining Engineering, Agriculture & Farm Engineering, Biotechnology Engineering, Pharmaceutical engineering, After 10th Diploma specializations in Civil Engineering, Mechanical Engineering, Mining Engineering, Agriculture & Farm Engineering.

Got more queries?

AskShikshaGPT on App

Q: Does Gate Institute of Technology and Sciences provide good placement facilities?

Gate Institute of Technology and Sciences has been rated 3 on placements.

Got more queries?

AskShikshaGPT on App

Q: How much is the intake across all courses being offerred at Gate Institute of Technology and Sciences?

The overall seats available across all courses offered by Gate Institute of Technology and Sciences is up to 1350. Good thing to know is that Gate Institute of Technology and Sciences has courses which are approved by prominent Government bodies like AICTE.

Got more queries?

AskShikshaGPT on App

Q: How can I get into Gate Institute of Technology and Sciences for UG/PG courses? Am I eligible for admission?

Gate Institute of Technology and Sciences has below criteria for taking admissions to it's various courses:

Courses	Eligibility
M.E./M.Tech	Candidate must have completed B.E./B.Tech. /AMIE in CSE/ CSIT/ Electronics & Computers Engg. /IT & Computer Science and Systems Engineering or equivalent from a UGC recognised University/ Institute. Preference will be given to GATE qualified candidates over TS PGECET qualified candidates. Candidate must have secured 50% marks in group subjects taken together in the qualifying examination (45% for reserved category).
B.E. / B.Tech	Candidates who have passed or appeared at the final year of the Diploma examination in Engineering conducted by the State Board of Technical Education and Training, Telangana / Andhra Pradesh or any other examination recognised as equivalent thereto by the State Board of Technical Education and Training, Telangana / Andhra Pradesh. Candidates should have completed 16 years of age, as on 31st December of the year of admission. There is no upper age limit.
MBA/PGDM	Candidate must have passed Bachelor Degree (BA / B.Com/ B.Sc/ BBA / BBM / BCA / BE / B.Tech / B. Pharmacy / Any 3 or 4 year Degree except Oriental Languages). Examinations of minimum three years duration with at least 50% marks (45% marks in case of reserved categories) in the qualifying examinations. Final year appearing students may also apply on provisional basis. The minimum age of the candidates should be 19 years as on the date of notification (Candidates whose date of Birth up to 30th MARCH, 2003). No maximum age limit.
After 10th Diploma	Candidate must have passed 10th examination from a recognised board.

Got more queries?

AskShikshaGPT on App

B.Tech. in Civil Engineering
at
Gate Institute of Technology and Sciences

Students also asked

Q: Is it worth to consider Gate Institute of Technology and Sciences as a good Institute?

Gate Institute of Technology and Sciences is a well-known institution for M.E./M.Tech, B.Tech, MBA/PGDM, After 1th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Gate Institute of Technology and Sciences has a rating of 3.2 on the basis of reviews by students. Not just this, it has also been rated 3 on campuslife, 3 on placements, 3 on faculty and 4 on Infrastructure.

Got more queries?

AskShikshaGPT on App

Q: What is the role of a Structural Engineer and Site Engineer?

Structural Engineers design, plan and supervise the construction projects, eg - buildings, parks, malls, bridges and more. They also take care of alterations to existing properties or structures. A Site Engineer takes responsibility for security, safety, health, organising and supervising material and people at sites.

Got more queries?

AskShikshaGPT on App

Q: What are the main subjects covered in the BTech Civil Engineering syllabus?

The BTech Civil Engineering course includes a lot of interesting subjects for students to study. Some of them are

Advanced Mathematics
Solid and Fluid Mechanics
Concrete Technology
Soil Surveying
Geotechnical Engineering
Environmental Engineering
Strength of Materials
Concrete Structures and Structural Analysis
Water Resources Engineering

Got more queries?

AskShikshaGPT on App

Download exam sample paper

B.Tech. in Civil Engineering
at
Gate Institute of Technology and Sciences
Entry Requirements

General

Requirements for 12th grade Up Arrow Icon

45%
Candidate must have passed 10+2 Examination with Mathematics, Physics and Chemistry(PCM) as optional or related vocational courses in the fields of Engineering and Technology, conducted by the Board of Intermediate Education, Telangana / Andhra Pradesh, along with bridge course or courses conducted by it for candidates enrolled from academic year 2000-2002 onwards, or any other examination recognized as equivalent thereto by the Board of Intermediate Education, Telangana / Andhra Pradesh. Candidate must have scored minimum mentioned marks in the subjects specified (PCM) taken together at 10+2 pattern. (40% marks for candidates belongs reserved Category in the subjects specified (PCM) taken together at 10+2 pattern). Appearing candidates for the final year of Intermediate Examination (10+2 pattern) with same above subjects, are also eligible.
Read more

TS EAMCET

Other eligibility criteria Up Arrow Icon

Candidate should be of Indian Nationality or Persons of Indian Origin (PIO) / Overseas Citizen of India (OCI) Card Holders. Candidate should belong to the state of Telangana / Andhra Pradesh. Candidates should have completed 16 years of age, as on 31st December of the year of admission. There is no upper age limit. Candidate are also eligible who have passed or appeared at the final year of the Diploma examination in Engineering conducted by the State Board of Technical Education and Training, Telangana / Andhra Pradesh or any other examination recognized as equivalent thereto by the State Board of Technical Education and Training, Telangana / Andhra Pradesh.