M.Tech in Mechanical Engineering colleges in Maharashtra

MET League of Colleges, Bhujbal Knowledge City, Nashik has been rated 4.1 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

Government College, Amravati MHT CET cutoff 2025 was only released for the EWS category students belonging to the Home State quota. The cutoff was published in the form of opening and closing percentiles for admission to the B.Tech. course specialisations. 

For this category, the overall cutoff ranged from 65.52 to 95.72. According to the last round, the most competitive engineering branch was BTech CSE, followed by the BTech in Information Technology. Students can refer to the table below to know the round 1 and last round cutoff percentiles for the EWS HS category. 

RIT Kolhapur has an impressive placement report. The table below provides the placement statistics recorded during RIT Kolhapur placements 2024:

The scope of M.Tech courses in India is vast and varied. Placements with good profiles/packages can be achieved by doing M.Tech . The highest package of an M.Tech graduate is 28 LPA, the average was 6.70 LPA, the median was 5.5 LPA and the lowest was 3.5 LPA. The M.Tech placements at Government College of Engineering, Aurangabad, have been steadily improving over the years.

The key highlights of Government College of Engineering Aurangabad placements 2022 are as follows:
Number of students placed: 228
Placement rate (Overall): 48%
Median Package INR 6.5 LPA (BTech) INR 5 LPA (MTech).

 The highest packages recorded was Rs 12.2 Lacs in Maharashtra Institute of Technology Aurangabad.

JSPM's Narhe Technical Campus courses are approved by eminent Government bodies such as AICTE. The combined seats available for various programmes provided by JSPM's Narhe Technical Campus goes up to 828.

The seats availability for offered courses at Dr. D. Y. Patil Technical Campus goes up to 912. Courses offerred by Dr. D. Y. Patil Technical Campus are approved by eminent Government bodies such as AICTE.

Priyadarshini College of Engineering offers seven M.Tech course at the PG level. A total of 148 seats are available for this course. Students can check the list of courses from the points mentioned below:

• Chemical Engineering
• Structural Engineering
• CSE
• Defence Technology
• Industrial Drives and Control
• Mechnaical Engineering Design
• VLSI

Yes, Dr DY Patil Institute of Technology offers an M.Tech programme at the PG-level in a full-time mode. The two-year programme is divided into four semesters. Additionally, the university provides M.Tech in multiple specialisations. For more details, candidates can refer to the following key highlights:

Particular	Highlights
Duration	Two-years
Semesters	Four semesters
Tuition Fees	INR 1.3 lakh
Selection Criteria	Entrance-based

Note: The above-mentioned fee is as per the official website. It is still subject to change and, hence, is indicative.

This depends on your interest and learning potential. The syllabus that is tough for you might be very easy to grasp for your friend, who finds it interesting and intriguing. For example, you may find Structural Dynamics and Advanced Numerical Analysis taught in the first year of M.Tech Civil Engineering very tough because of the high mathematical aptitude and analytical theory that it deals with. But, for some other person, it might be easy-going and fun to study, as it gives you a channel to learn, explore, and experiment with something different. 

know more about -

Civil Engineering Courses

D.K.T.E. Society's Textile and Engineering Institute has a well-supported campus with facilities like The library has a collection of 21806 books. Library provides the facility of photocopying, electronic book search and a reading room. The library is a member of DELNET, British Council Library and Shivaji University Library. Additionally, it has been rated 4.11 for infrastructure by the verified students on Shiksha platform.

Yes, JNEC Aurangabad offers good placements to its students. The key highlights of JNEC Aurangabad placements 2023 are presented below:

Particulars	Placement Statistics (2023)
Highest package	INR 9 LPA
Average package	INR 4.5 LPA
Total recruiters	300+
Students placed	256
Students placed in last 5 years	1,500+
Top recruiters	Jio, Capgemini, Tech Mahindra, Infosys

Yes, Amrutvahini College of Engineering conducts placement drives annually for BTech, M.Tech and MBA courses. The key highlights of Amrutvahini College of Engineering placements for the Class of 2024 and 2025 are tabulated below:

Particulars	Placement Statistics (2024)	Placement Statistics (2025)
the highest package	INR 8.5 LPA	INR 8.8 LPA
Total placements	715	486

Deogiri Institute of Engineering and Management Studies is a reputed institute for B.Tech, M.E./M.Tech, MBA/PGDM. Students can opt these programs to pursue their career in Engineering, Business & Management Studies. Institute has trained & experienced faculty who deliver these programs. Deogiri Institute of Engineering and Management Studies has a review rating of 3.8 on the basis of reviews by students. In addition to this, it has been rated 3.9 on campuslife, 3.5 on placements, 4.1 on faculty and 3.8 on Infrastructure.

The key highlights of Tulsiramji Gaikwad Patil College of Engineering and Technology placements for the Class of 2024 are tabulated below:

Particulars	Placement Statistics (2024)
Placement percentage	54%
the highest package	INR 7.25 LPA
Total students	399
Total students placed	215

MESCE-Modern Education Society’s College of Engineering falls in the category of Tier II engineering institutes located in India. Even though it is a quality college with somewhat reasonable infrastructure. It is not placed on the same pedestal as Tier 1 colleges, like the IITs or NITs. Specialized programs, experienced faculty, and good placement chances are some factors for which MESCE is famous, but not for the generalized engineering branch. Nevertheless, for those learners who wish to enter one of the best universities and be awarded with national status – there are other options. However, MESCE is still an option for a candidate who wants quality engineering training in an environment that does not frustrate them.

Vidya Pratishthan's Kamalnayan Bajaj Institute of Engineering and Technology has been rated 3.3 on placements on the basis of 45 reviews done by students.

In general, the faculty at Genba Sopanrao Moze College of Engineering (GSMCOE) is comprehensively regarded as adequately qualified and experienced. Many professors are Masters degree holders (M.Tech., Ph.D.) in their own fields, and they carry both theoretical knowledge and practical experience in the class. The institution trains very well with the relevant theoretical knowledge and encourages practical application of knowledge by organizing workshops, seminars, and industry interaction sessions. 

As with most institutions, the quality of teaching varies from department to department and depending on the individual faculty member. Overall, it adds up to GSMCOE continuously improving its quality of teaching through the professional development of faculty and its interaction with industry.

Padmabhooshan Vasantdada Patil Institute of Technology (PVPIT) Pune offers degree courses in UG and PG with multiple specilizations. Students who wants to continue their studies and do Masters degree from PVPIT must fulfill the eligibility criteria and then apply. PVPIT allots a total of 108 seats in M.Tech.

Firstly, Aspirants need to go through the criteria set by the institute, then score a qualifying marks in the entrance exam i.e. GATE, MHTCET M.Tech. After that shortlisted candidates will be called for counselling or interview and then selected candidates will be alloted seat as per the ranking. As many students can apply for M.Tech at PVPIT Pune but those will get selected who qualify the selection process.

G H Raisoni Institute of Engineering and Technology, Nagpur is a well-known institution for BCA, BBA, B.Com, B.Sc, M.Sc, MMS, B.E. / B.Tech, M.E./M.Tech, After 10th Diploma, MBA/PGDM, MCA courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, G H Raisoni Institute of Engineering and Technology, Nagpur has a rating of 4 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.21 on Campus Life, 3.93 on Placements, 3.93 on Faculty and 4.27 on Infrastructure.

Established in 1989,  Dr. Babasaheb Ambedkar Technological University (DBATU) is a unitary, Maharashtra state Technological University in Lonere, Maharashtra. It is named after Babasaheb Ambedkar, a prominent Indian jurist, economist, politician and social reformer. The university is recognised by the University Grants Commission (UGC), the Association of Indian Universities (AIU), and is accredited by NAAC with a 'B' grade. Presently, more than 415 institutes are affiliated with the University, and the total student strength is 2 lakh. Popular courses at DBATU include BE/ BTech, MTech, and MCA. DBATU admission to BTech is done through the JEE Mains entrance examinations, followed by counselling. According to the DBATU placements, the median package stood at INR 4.5 LPA.

The St. Vincent Pallotti College of Engineering and Technology the highest package recorded for the 2024 passing-out batch was INR 8 LPA. Take a look at the table below to know the branch-wise the highest package details:

Branch	the highest Package (2024)
Computer Engineering	INR 7 LPA
IT	INR 8 LPA
Electronics & Telecommunication Engineering	INR 3.22 LPA
Electrical Engineering	INR 3.36 LPA
Mechanical Engineering	INR 6.50 LPA
Civil Engineering	INR 2.78 LPA

Anantrao Pawar College of Engineering and Research has courses such as B.Tech, B.Voc, B.Arch, M.E./M.Tech which are primarily in the stream of Engineering, IT & Software, Architecture & Planning. Anantrao Pawar College of Engineering and Research has specializations such as B.Tech specializations in Civil Engineering, Mechanical Engineering, Information Technology, Telecommunication Engineering, Computer Science Engineering, B.Voc specializations in Automobile Engineering, Electronics Engineering, M.E./M.Tech specializations in Civil Engineering, Mechanical Engineering.