M.Tech in Construction Engineering colleges in Maharashtra

IIT Bombay M.Tech tuition fee ranges from INR 2.71 lakh for most of the course specialisations. The course fee is higher for the integrated M.Tech programmes. Hence, the highest fee range goes up to INR 10 lakh. Candidates seeking admission must pay the prescribed admission fee amount to confirm candidature. Moreover, the fee structure is cumulative of other fee components as well. The mentioned amount is taken from the official website/ sanctioning body. It is still subject to revision and hence, is indicative.

Check the VNIT Nagpur placement statistics 2025 in comparison with NIT K and NIT Raipur below:

NIT Name	Highest Package (2025)	Average Package (2025)
VNIT Nagpur	64 L	10.70 L (BTech)
NIT Kurukshetra	63.12 L	14.84 L (BTech)
NIT Raipur	60 L	11.1 L (Overall)

COEP, Pune is an older engineering institute in India that was set up in 1854. Despite the fact that the COEP is generally recognised as a Tier 1 institution, it cannot be considered a Tier 1 one because the Tier 1 status is an unofficial classification of institutions with well-educated staff and good placement records. This institute is situated just below the Tier 1 level, known as a "premier autonomous college."

According to the Times Engineering Survey 2026, COEP is the 5th-best engineering institute All India. Also, it ranked 13th under 'Engineering (Government)' and 17th under 'Engineering' by India Today 2026 and 12th in 'Engineering (Government)' by Outlook-ICARE 2026. According to NIRF 2025 COEP took 90th place in Engineering and 3rd in State Public Universities.

The COEP offers BTech, MTech, MBA, BPan, and PG Diploma degrees with BTech as the key course in the areas of Mechanical, Civil, Computer, and Electronics & Telecommunication Engineering.

High rankings, competitive cutoffs and good placements make COEP one of the best engineering colleges in Maharashtra as well as a successful player nation-wide. COEP is not at the same level of research as IITs; however, it is considered to be on the very border between Tier 1.

Yes, MIT WPU is a good college for MTech taking its infrastructure, faculty and placements into account. However the students must be prepared for the challanges posed by the academic environment. 

Yes, the Veermata Jijabai Technological Institute Mumbai follows the refund policy of the University Grants Commission (UGC). As per UGC guidelines, the fees are 100% refundable if the admission is cancelled 15 days prior to the last admission date. If the admission is cancelled after 30 days of the admission deadline, the university does no return the fee.

DY Patil Pimpri ME the highest package for the batch of 2023 stood at INR 70 LPA. The table below depicts the highest package offered during Dr DY Patil Institute of Technology placements for the year 2023 for reference:

Particulars	Placement Statistics 2023
the highest Package	INR 70 LPA

Note: This information is sourced from official website/ sanctioning body and is subject to change

In the absence of ME-specific placement, generic placement data has been taken

Yes, Ramdeobaba University accepts the MAT exam for admission to MBA. Additionally, the college has some basic eligibility criteria that differ from course to course i.e., if a candidates want to apply for an undergraduate course, they must have completed Class 12 in a relevant stream and if a candidates want to apply for PG courses they, must have a UG degree.

The maximum number of seats are in each branch are as follows:

Mechanical Engineering- Design 18

Mechanical Engineering- Heat Power 18

Electronics and Telecommunication Engineering- VLSI and Embedded Systems 18

Computer Engineering 18

Construction Management (Civil Engineering) 18

Information Technology 24

As per the official website of DY Patil College of Engineering, 20% of the seats are reserved for the college management. The students seeking admission to these seats are advised to contact the admission cell in charge for more details on this. If a student is not sure about the marks and admission via different rounds, it is better to take admission after the fourth round only or before the second round.

The Admission procedure of Sandip University is as follows:

Enter your full Name as mentioned on the SSC result along with your registered mobile number.

In the next section include the appropriate Personal details.

In the “Program details” section ensure that you include proper options for the highest Qualification, Select School, Course Stream and Admission Year.

Fill all the required “Education Details” as per your Qualification.

Upload all the required scanned documents such as SSC, HSC & Graduation result. The Documents are accepted in PDF Format only.

Proceed for your online payment to complete the payment.

After successful payment, you will receive the confirmation of provisional registration details on your registered email and phone no.

For admission to the ME course, students need to fulfil the minimum eligibility criteria in the first place. TSSM's Bhivarabai Sawant College of Engineering and Research accepts a valid score on the GATE, MHTCET MTech, GPAT exam. Apart from this, the total tuition fee for the ME course is INR 1.46 lakh.

Padmabhooshan Vasantdada Patil Institute of Technology (PVPIT) Pune offers degree courses in UG and PG with multiple specilizations. Students who wants to continue their studies and do Masters degree from PVPIT must fulfill the eligibility criteria and then apply. PVPIT allots a total of 108 seats in M.Tech.

Firstly, Aspirants need to go through the criteria set by the institute, then score a qualifying marks in the entrance exam i.e. GATE, MHTCET M.Tech. After that shortlisted candidates will be called for counselling or interview and then selected candidates will be alloted seat as per the ranking. As many students can apply for M.Tech at PVPIT Pune but those will get selected who qualify the selection process.

Students seeking to get into the M.Tech programme offered at the university must satisfy the admission criteria for the course. M.Tech admission at DY Patil Institute of Technology is entrance-based. Students need to appear for the accepted entrance exams, i.e., GATE/MHTCET. The basic eligibility is to pass graduation with a valid aggregate from a recognised university. However, as per the general report, many universities accept candidates who have scores of 60-70% marks in their graduation.

Imperial College of Engineering and Research offers Degree courses including 4 UG and 6 PG courses. These programs are offerred in Full Time mode. Imperial College of Engineering and Research has specializations such as B.Tech specializations in Civil Engineering, Mechanical Engineering, Electronics Engineering, Computer Science Engineering, M.E./M.Tech specializations in Structural Engineering, Signal Processing, Mechanical Engineering, Construction Engineering, Computer Science Engineering.

Yes, DY Patil University Pune is good in terms of placements. The key highlights of DY Patil University Pune placements 2024 are presented below:

Particulars	Placement Statistics (2024)
the highest package	INR 12 LPA
Internship offers	100%
Total companies	500+
School of Management average package	INR 4.8 LPA