What is the schedule for COMEDK Counselling 2025?

The Consortium of Medical, Engineering, and Dental Colleges of Karnataka has been concluded after the release of two rounds. Every year COMEDK Counselling is conducted in multiple rounds. Going as per the previous year trends, COMEDK Round 1 Allotment results were released in Jul 2025. After the declaration of merit lists, the selected candidates must report to allotted colleges (only for Accept and Freeze candidates) along with online printout of allotment letter and Fee receipt of COMEDK for further admissions.

Can I get direct admission at ACS College of Engineering?

Direct admission to ACS College of Engineering is not available. All admissions are made through the entrance exam and interview process. However, you can get direct admission at ACS College of Engineering if you have a valid score in the KCET or COMEDK entrance test. You can also apply through the management quota, but the fee will be higher. You can fill out the online application form on their website or contact them by phone or email.

What is best course at ACS College of Engineering?

Each And every course is best in A. CS College Of Engineering except Civil and Mechanical. But Aeronautical Engineering, Aerospace Engineering, Biomedical Engineering are special and best branches in A. CS College Of Engineering.

Are admissions in ACS College of Engineering open?

Yes, Admissions in ACS College of Engineering are open for Session 2023-24 for Bachelor Of Engineering (B.E. ). And M.Tech. Visit College website to apply. KCET 2023 registration (Marks entry facility reopening) on going.

Are there any seat reservations at ACS College of Engineering?

Yes, If You Apply Through COMEDK or KCET at ACS College of Engineering. Seat reservation Followed by the COMEDK or KCET Same will Be Followed By College. But no seat reservation for Management Quota Students.

Does ACS College of Engineering offer BTech courses?

Yes, ACS College of Engineering does offer a BTech course for the duration of four years, divided into eight semesters and offered in full-time mode. The college offers several specialisations in the BE course, such as Mechanical Engineering, Civil Engineering, Aerspace Engineering, etc. Moreover, the college also offers BE lateral entry admission in multiple specialsiations too. The institute offers BE courses with the affiliation of Visvesvaraya Technological University.

Can I get M.Tech admission in ACS College of Engineering without a GATE score?

No, ACS College of Engineering needs a valid GATE score for admission to MTech. Candidates will not be considered for the selection process if they do not clear GATE. It is necessary to prepare and clear GATE to get a seat in M.Tech in ACS.

What is the eligibility for M.Tech at ACS College of Engineering?

To be considered for M.Tech at ACS College of Engineering, applicants should have a BE/BTech or equivalent degree. At least 50% marks in the concerned engineering stream are needed. Only candidates who meet this academic requirement can apply for admission.

Does ACS College of Engineering offer specialisations in BTech?

Yes, ACS College of Engineering provides specialisations in Aeronautical Engineering, Bio-Medical Engineering, and other core courses. These traditional and new-age branches are developed to cater to existing industry requirements. Practical and theoretical training is provided to the students. Research and project-based learning are also encouraged by the college.

Which entrance exams are accepted for BTech at ACS College of Engineering?

ACS College of Engineering considers CET, COMEDK, and JEE Main scores for BTech admission. One needs to appear for one of these and achieve cutoff ranks. Shortlisting occurs through counselling and seat allocation. Admission is finalized after payment of fees.

What is the eligibility for BTech admission at ACS College of Engineering?

In order to be considered for BTech at ACS College of Engineering, the candidates need to have passed Class 12 with Mathematics and Physics as core subjects. They must have studied Chemistry, Biology, Computer Science, or related subjects. There should be at least 45% aggregate marks. Entrance test marks such as CET, COMEDK, or JEE Main are a must.

In which specialisation does ACS College of Engineering offer an M.Tech course?

ACS College of Engineering offers only one specialisation in M.Tech course, i.e., M.Tech in Structural Engineering. For admission to this course, the institute accepts the national-level and state-level-based PG engineering entrance exams. ACSE accepts the valid scores of K PGCET/ GATE for the selection process in M.Tech courses, followed by counselling.

Is GATE compulsory to get admission to the M.Tech course at ACS College of Engineering?

For admissions to M.Tech courses at ACS College of Engineering, candidates are required to achieve a valid score in either GATE or K-PGCET. Therefore, candidates with the relevant scores in any of the following entrance exams can get admissions to the M.Tech course. There is no compulsion for GATE scores. However, GATE-qualified candidates are eligible for scholarships through AICTE.

In which college is it easier to get admissions into the M.Tech course, BMSCE or ACS College of Engineering?

The admission process for the M.Tech course at BMSCE or ACS College of Engineering is almost similar for the M.Tech course, in which candidates firstly require to complete their BTech degree with a minimum aggregate of 50%. Additionally, for the selection process, both of the colleges accept K-PGCET and GATE scores. However, the only difference that can be seen is BMSCE offers more than 10 specialisations in the M.Tech course, and ACS College of Engineering offers only one specialisation in the M.Tech course. Therefore, candidates applying to the distinct M.Tech specialisation are required to complete their BE/BTech programme in the relevant field/stream.

What is the process to get a seat in the M.Tech course at ACS College of Enginering?

To get a seat in the M.Tech course at ACS College of Engineering, candidates are required to follow multiple steps, such as completing the eligibility criteria, appearing for the entrance examination, completing the counselling process, completing the application form, etc. Check out the detailed process below: The selection criteria for admission to the MTech programme at ACS College of Engineering primarily involve GATE/ K-PGCET scores. Applicants are required to appear for either of the mentioned entrance exams. The scores obtained in these exams play a significant role in the admission process, followed by counselling. Additionally, other factors such as academic qualifications and performance in the qualifying examination may also be considered during the selection process.

What is the seat intake for M.Tech course at ACS College of Engineering?

ACS College of Engineering offers a total seat intake of 18 seats for its PG-level M.Tech course. Candidates must complete the admission procedure to be eligible for the M.Tech seats. The seats are allocated as per the cutoff and seat intake. The M.Tech seats are offered in only one specialisations. Candidates can find below the M.Tech seat: Courses Seats MTech in Structural Engineering 18

What are the documents required for admission to the M.Tech course at ACS College of Engineering?

Candidates are required to submit the original documents at the time of verification of documents for M.Tech courses in the ACS College of Engineering. Moreover, candidates are required to submit original documents along with sets of self-attested copies. The names of the documents are as follows: Entrance Exam Allotment letter Class 10 mark sheet (original with photocopy) Class 12 mark sheet (original with photocopy) Proof of residence Medical certificate Income certificate (if applicable) Student Aadhar card Student's photographs

Can I get direct admission for M.Tech course at ACS College of Engineering?

No, candidates are not allowed to get direct admissions to M.Tech courses at ACS College of Engineering. For the admission process, the college requires candidates to achieve valid scores in any of the entrance exams from GATE and K-PGCET, followed by counselling. Therefore, ACS College of Engineering M.Tech admission is entrance-based. However, the college does provide management quota seats for M.Tech students.

What is the commencement date of the M.Tech new session at ACS College of Engineering?

Currently, the dates for the commencement of classes for the M.Tech batch 2025 have not been released at the official website of the ACS College of Engineering. However, as per the previous academic calendar, the classes commenced in August. Therefore, it can be anticipated that for this academic year, the classes will commence on similar month.

I have completed BTech in CSE, can I pursue M.Tech in Structural Engineering from ACS College of Engineering?

As per the sources and web pages available at the official website of ACS College of Engineering, for admissions to M.Tech course at ACS College of Engineering candidates must complete their BE/ BTech degree in Civil Engineering with a minimum aggregate of 50%. Moreover, according to the brochure available on the official website of the college mentioned that the candidates from any stream in BE/ BTech course can get admissions to M.Tech course, after completing the other eligibility requirements. Candidates are suggested to reach out to the college's admission department or call the admission helpline number for this inquiry.

Where can a candidate find ACS College of Engineering cut off?

Following the entrance exam, the ACS College of Engineering cutoff is often announced. Applicants can check the deadline via the college website or by getting in touch with the admissions department. For instance, the college website displays the KCET cutoff ranks for various years together with the cutoff for the B.E. in Computer Science and Engineering at ACS College of Engineering for the previous few years. Furthermore, the minimum score required for admission to the B.Tech Mechanical Engineering programme is typically 60% on both the JEE Main and CET exams.

What is ACS College of Engineering cutoff?

ACS College of Engineering accepts COMEDK UGET Cutoff rakings for admission to the B.E./B.Tech courses. The COMEDK UGET 2024 Roud 2 was released for candidates under the AI and the HS category. The COMEDK UGET Cutoff ranks for ACS ranged between 64831 and 99733 for the General AI category candidates. BE in Electronics and Communication Engineering was the most competitve course for the General AI category candidates. Given below are the Cutoff ranks for ACS College of Engineering COMEDK UGET Round 2 for the General AI category candidates: Course 2024 B.E. in Aeronautical Engineering 62967 (R1) B.E. in Computer Science and Engineering 99710 B.E. in Electronics and Communication Engineering 64831 B.E. in Biomedical Engineering 67475 B.E. in Aerospace Engineering 84122 B.E. in Computer Science and Engineering (Cyber Security) 83190 B.E. in Computer Science and Engineering (Data Science) 99733 B.Tech. in Computer Science & Engineering (IOT) 70928

What is the closing rank cutoff for the M.Tech in Structural Engineering at ACS College of Engineering?

The cutoff for the academic batch 2025 is going to be released soon. However, for the previous academic years 2024 and 2023, the closing ranks for M.Tech in Structural Engineering at ACS College of Engineering on the basis of GATE ranks are 6226 and 3852, respectively. Candidates can compare the cutoff trends for M.Tech in Structural Engineering over the years in the table mentioned below: MTech in Structural Engineering - ACS College of Engineering : Karnataka PGCET Closing Rank Cutoff (General-All India) Section 2022 2023 2024 Overall 3694 3852 6226

How many marks are required for B.E. in Aerospace Engineering at ACS College of Engineering?

The minimum marks required for B.E. in Aerospace Engineering at ACS College of Engineering vary depending on the entrance exam you take. For example, the minimum marks required for B.E. in Aerospace Engineering through KCET 2023 is 39386. However, the minimum marks required for the same course through COMEDK-UGET 2023 may be different. The best way to know the minimum marks required for B.E. in Aerospace Engineering at ACS College of Engineering is to check the cutoff for the previous year. You can find the cutoff on the college website or by contacting the admissions office. Here are the cutoffs for B.E. in Aerospace Engineering at ACS College of Engineering for the past few years: Year Course Entrance Exam Minimum Marks 2022 B.E. in Aerospace Engineering KCET 41052 2021 B.E. in Aerospace Engineering KCET 39546 2020 B.E. in Aerospace Engineering KCET 38379 2019 B.E. in Aerospace Engineering KCET 36887 2018 B.E. in Aerospace Engineering KCET 35679 As you can see, the cutoff has been increasing over the past few years. This is due to the increasing number of applicants and the increasing demand for engineering education in India. If you are interested in applying for ACS College of Engineering, I recommend that you start preparing early. You should study hard for the entrance examination and you should also participate in extracurricular activities and sports. You should also write a strong personal statement and get good letters of recommendation. If you do all of these things, you will increase your chances of getting into ACS College of Engineering.

What is the placement percentage for ACS College of Engineering?

The college has released the branch-wise placement percentage for the 2022 drive. Of all the branches, CSE recorded the highest placement rate of 67.47%. The second in the sequence was BME branch. The table below mentions the branch-wise ACSCE placement rate for 2022: Branch Placement Rate (2022) Computer Science & Engineering (CSE) 67.47% Biomedical Engineering (BME) 66.67% Electronics and Communication Engineering (ECE) 57.5% Aeronautical Engineering 47.06% Mechanical Engineering (ME) 45.45% Aerospace Engineering (AS) 32.35%

Where are ACSCE alumni working?

According to unofficial sources, a large share of ACS College of Engineering alumni is working in the Business Development sector with a 26% share. The other top sectors that involve the majority of alumni are Engineering and Operations. The detailed sector-wise distribution of alumni is depicted in the below pie chart: NOTE: The sectors involved in the 'Others' category are Programme and Project Management, Sales, Finance, and Consulting.

Which college offers the highest average package among R.V. College of Engineering and ACS College of Engineering?

As per the verified Shiksha sources, the average package offered to M.Tech graduates at ACS College of Engineering is INR 3 lakh. On the other hand, the average package provided to the M.Tech graduates at R.V. College of Engineering is INR 7 lakh. Hence, among the RVCE and ACSCE, the RVCE offers the highest average placement packages for M.Tech graduates.

Which college offers the highest average package for the BE course among BMS College of Engineering and ACS College of Engineering?

As per the verified Shiksha sources, the average package offered to BE graduates at ACS College of Engineering is INR 3 lakh. On the other hand, the average package provided to the BE graduates at BMS College of Engineering ranges from INR 7 Lacs to INR 9 lakh. Hence, among the BMSCE and ACSCE, the BMSCE offers the highest average placement packages for BE graduates.

Are admissions at ACS College of Engineering entrance-based or merit-based?

The ACS College of Engineering uses an entrance-based admissions process. Candidates for the B.E. programme are chosen depending on how well they do on entrance tests like JEE Main, COMED-K, or CET. The PGCET or GATE score determines a candidate's admission to the M.Tech programme. In a similar vein, candidates for Ph.D. programmes are chosen according to how well they score on the qualifying admission exam. As a result, the college's several programmes are selected through an entrance-based procedure.

Is ACS College of Engineering is more expensive than BMS College of Engineering?

ACS College of Engineering is not expensive than BMS College of Engineering. ACS College of Engineering: The average annual fee for the 36 courses offered by ACS College of Engineering is INR 58,806. For the four-year Aerospace Engineering course, the total fee is INR 235,224. The total tuition fee for the four-year B.E. in Computer Science and Engineering course is INR 3.86 lakh.

What entrance exam scores are accepted by ACS College of Engineering for admission?

ACSCE Bangalore offers BE and M.Tech in various specializations. The selection of students to all the courses is made on marks obtained in national-level qualifying exams such as CET, COMED K, and GATE etc. The last round closing rank for KCET and COMED K for the B.E. programme remained at 202306 (General) and 73745 (General) respectively.

What is hostel fees of ACS College of Engineering?

The hostel fees for A. CS College Of Engineering is 85000/ for first year students. From Second year You Have to Pay 80000/-. The 5k is security money. Including all things (like Wi-Fi, Gymnasium, etc. ). .

What is the fee for various courses at ACS College of Engineering?

B.E: 58,806 rupees per year M.Tech: 2 years, accepted GATE or Karnataka PGCET B.Tech in Computer Science and Engineering (Cyber Security): 39386 rupees KCET cutoff by rank, 33243 rupees COMED K cutoff by rank BE Computer Science and Engineering, BE Data Science, BE Electronics & Communication Engineering: 57263, 59640, 60906 rupees KCET cutoff by rank, 39159, 47350, 40956 rupees COMED K cutoff by rank

2 Videos,

12 Photos

ACS College of Engineering: Courses, Fees, Admission 2025, Placements, Rankings

Mysore Road, Bangalore

3.8 /5

(124 Reviews)

88 Student Q&A

A NAAC accredited
Private Institute
Estd. 2009

ACS College of Engineering
What's new?

For All Courses

Change

The COMEDK UGET 2026 registration process has started for ACSCE admission to the BE/BTech programme. The last date to register is Mar 16, 2026. Also, the COMEDK UGET exam 2026 will be held on May 9, 2026.

A few more updates are given below:

The Karnataka PGCET 2026 exam for admission to the MBA and MCA courses will be held on May 14, 2026. For the ME/MTech course, the exam is scheduled for May 23, 2026.
The KCET 2026 registration window for admission to the BE/BTech course is now closed. The KCET exam 2026 will be held on Apr 23 and Apr 24, 2026.
The GATE 2026 exam for admission to ME/MTech courses has concluded. Results are scheduled for release on Mar 19, 2026.

ACS College of Engineering Overview

Table of contents

ACS College of Engineering Highlights 2025
ACS College of Engineering Popular programs
ACS College of Engineering Admission process
ACS College of Engineering Student Reviews
ACS College of Engineering BTech Cut-off Trends: COMEDK 2022 R3 (Released)
+ 7 more items

ACS College of Engineering Highlights 2025

ACS College of Engineering (ACSCE), Bangalore was established in 2009. It is affiliated with Visvesvaraya Technological University, Belagavi and approved by the All India Council of Technical Education. It has 11 departments. It equips its students not only with technical knowledge but also integrates value education, environmental awareness and communication skills into its curriculum. It offers various undergraduate and postgraduate programmes in the Engineering stream, including new age ones such as Aeronautical Engineering and Bio-medical Engineering. It has a powerful Wi-Fi-enabled campus and anti-ragging committee which is very proactive in monitoring the college on a 24X7 basis including the hostel premises. ACS College of Engineering established a Science Forum with the motto of encouraging the students to understand the importance of engineering and science in various fields and a civil engineering association named as CORE “Civil Organization for Revolutionary Engineers”. PhD Research Scholars were appointed at ACS Research Center.

ACS College of Engineering has an E-learning facility that helps teachers to provide opportunities for mutual discussion, and access to online resources. This basically enhances the quality of education by making communication smooth and fast between the teacher and learner. E-learning is the innovative mode of learning with the help of communication technologies (ICTs). It comprises of the use of ICT-based tools (e.g. Internet, computer, telephone, radio, video, and others) and content created with technology (e.g. animations) to support teaching and learning activities.

Particulars	Statistics
Year of establishment	2009
Campus	Bangalore
Campus size	6 acre
Recognised by	NAAC (Grade A), AICTE
Modes of education	Full-time and e-learning
Number of courses offered	19 courses
Total no. of seats	770+
Affiliation	Visvesvaraya Technological University, Belagavi

For more information about ACS College of Engineering check out the below videos:

Commonly asked questions
On Highlights

Q: Is ACS College of Engineering good for placements?

The college has a decent placement record. During 2022 placements, out of 253 total graduates 132 were placed. All the important details related to ACS College of Engineering placements 2022 is depicted below:

Particulars	Placement Statistics (2022)
No. of students placed (on-campus)	82
No. of students placed (off-campus)	50
Total students graduated	253
Total students placed	132
Placement rate	67.47% (the highest)

Q: Who were the recruiters at ACS College of Engineering placements?

Some of the prominent recruiters that were part of ACS College of Engineering placements in recent years are listed in the table below:

ACS College of Engineering Placements: Top Recruiters
Vee Technologies	UTL Technologies	Kotak Bank
Nestaway Technologies Pvt. Ltd.	Aegis Group	Capgemini
IBM India	Wipro Technologies	Hewlett Packard Enterprise (HPE)
Siemens Industry Software (India) Pvt. Ltd.	SEED Infotech Ltd.	Convergys
AMDOCS	Infrasoft Technologies	Quinnox Consulting Services

Q: What is the highest package offered during ACS College of Engineering placements?

The ACS College of Engineering the highest package has not been released. However, the other placement statistics have been disclosed, which are as follows:

Particulars	Placement Statistics (2022)
Total students graduated	253
Total students placed	132
Placement rate	67.47% (the highest)

Q: Can I get admission at ACS College of Engineering in BTech if my rank is between 56000 and 57000?

ACS College of Engineering COMEDK Round 2 cutoff for Aerospace Engineering is 56651 which is very close to this range. This was for general category under All India quota. Unless the candidate belongs to some other category or domicile, one can not afford to score less than this. With this rank, there is a probability of getting admission however since, the cut offs keep changing from round to round, better ranks definitely increases your chances of getting admission in ACS College of Engineering.