Which specialisations are offered under the M.Tech course at Christ Kengari Campus?

The specialisations are offered under the M.Tech course at Christ Kengari Campus is as follows: MTech in Computer Science and Engineering: 18 seats MTech in Data Science: 12 seats MTech in Machine Design: 12 seats MTech in Power Systems: 12 seats MTech in VLSI and Embedded Systems: 12 seats MTech in Structural Engineering : 18 seats

Are admission dates out for M.Tech at Christ University Kengeri Campus?

Yes, the admission dates are out for M.Tech at Christ University Kengeri Campus. The application was released on December 8, 2025. The university releases three separate dates for Febuary, March, and May. Candidates can refer to the table below for May admission dates for MTech course: Events for the PG course Dates Application Open 17 March 2025 Lats date of application submission 18 May 2025 SP Date 23 May 2025 - 24 May 2025 Result Date 26 May, 2025

What are the Christ University Kengeri Campus M.Tech registration dates?

The Christ University Kengeri Campus M.Tech application form 2025 was released on December 8, 2024. The last date to register for the course was May 18, 2025. Further, the selection rounds were conducted between May 23 and May 24, 2025.

What is the course fees for two years M.Tech in Christ University Kengeri Campus?

The course fee for the two-year MTech course in Christ University, Kengeri Campus is around INR 1.7 Lacs to INR 2.1 Lakh. Additionally, candidates must also pay the admission registration fee of INR 8,000, which is Non-Refundable. It is to be noted that though the fee is fixed for four years, there may be a periodic nominal increase to meet the rise in costs. Further, applicants must also submit the application fee of INR 5,000 while filling in the application form online. NOTE: *This information is sourced from the official website/ sanctioning body and is subject to change

Whom should I contact after the successful submission of Christ Kenegri Campus application form?

After successfully submitting the application form students do not need to contact anyone. Once the application form is submitted successfully, the college checks the forms. If the form is filled correctly with the right documents, it is accepted. The college then informs the students about the further process of admissions.

What is the process of application at Christ University Kengeri Campus?

Christ University Kengeri Campus Application Process Log on to the verified website and register Enter the required details Select the courses Upload documents like Class 10 and 12 marksheets, Aadhar, etc. Upload the photo and signature Pay the application fee

Is it worthy to take admissions in Christ University Kengeri Campus?

Christ University Kengeri Campus, established in 2009, is located in Kengeri, Bangalore. It is a constituent university of Christ deemed-to-be University . Christ Kengeri is known for its engineering courses & is referred to as the School of Engineering across all Christ campuses. Christ University Kengeri Campus has a big campus spread across 78.5 acres with all the required facilities offered to the students. It is situated about 25 kilometers away from the Central Campus, 10 kilometers away from Bangalore University . The Kengeri campus of Christ has two schools under it, namely School of Engineering & Technology and School of Architecture that offers UG, PG and doctoral programmes. Accredited with Grade 'A' by NAAC. It is definitely worth taking admissions in Christ Kengeri Campus.

Can students with a minimum cutoff for B Tech get a seat at Christ - Kengeri Campus?

Christ University Kengeri Campus offers a B.Tech programme in Computer Science and Engineering, which is a 4-year, 8-semester undergraduate program. The minimum eligibility criteria for this programme are 10+2 from a state/central recognised institution. However, the information available does not mention a specific minimum cutoff for B.Tech at Christ - Kengeri Campus. Students interested in seeking a seat at Christ - Kengeri Campus for the B.Tech programme can apply through the Christ University Entrance Test (CUET) and the Karnataka Common Entrance Test (KCET). The admission process for the B.Tech programme at Christ - Kengeri Campus includes taking up electives from a wide choice of subjects, such as Embedded Low Power Systems, Object Oriented Systems, Information and System Security, and Software Reliability. While there is no explicit mention of a minimum cutoff for B.Tech at Christ - Kengeri Campus, it is essential to note that the university has a strong focus on practical learning and has well-equipped labs for various fields, including Geotechnical, Basic Material Testing and Surveying, and Geomatics. Additionally, the university has a Career Guidance and Placement Cell that organizes placement-related activities, with a 100% placement record for B.Tech students in the past

3 Videos,

7 Photos

Christ University Kengeri Campus MTech Courses & Fees 2205: Admission, Application & Selection Criteria

Q: Can students join Christ Kengeri Campus M.Tech course directly without any entrance exam?

Yes, candidates can join Christ Kengeri Campus M.Tech course without any entrance exam. However, candidates must participate in the selection process. The Christ University Kengeri Campus M.Tech selection process is inclusive of Skill Assessment (SA), Micro Presentation (MP), and Personal interview (PI). For the SA, the applicants will be given a topic to write. Further, for the MP round candidate should be able to talk for 90 seconds, on a topic given by the panel. Finally, for the PI rounds, the candidate will be interviewed for ten minutes. The selection process (SA_MP_PI) will be held in person at the venue selected while submitting the application form online

Q: Are admission open for M.Tech at Christ University Kengeri Campus?

Yes, admission is open for MTech at Christ University Kengeri Campus for the academic year 2025. The admission began with the release of the applicaton form on March 16, 2025. The last date to submit the online application form for the May admission round is March 16, 2025. Further, the Christ University Kengeri Campus selection process will be conducted between May 23 and May 24, 2025.

Kengeri, Bangalore

4.2 /5

(11 Reviews)

80 Student Q&A

Private Institute
Estd. 2007

Last updated on 25 Sep '26

Christ University Kengeri Campus M.E./M.Tech
What's new?

Karnataka PGCET 2026 round 1 seat allotment result for the Christ - Kengeri Campus M.E./M.Tech admission has been published. Students can pay their fee till Oct 7, 2026.

Christ University Kengeri Campus Overview

Table of contents

Christ - Kengeri Campus M.E./M.Tech Highlights 2026
Christ University Kengeri Campus M.E./M.Tech Popular courses
Christ - Kengeri Campus M.E./M.Tech Fees 2026
Christ University Kengeri Campus MTech Admission Dates 2025
Christ University Kengeri Campus MTech Admission 2025: How to Apply?
+ 5 more items

Christ - Kengeri Campus M.E./M.Tech Highlights 2026

M.E./M.Tech at Christ - Kengeri Campus is a 2 year course that is offered in a full-time mode. Students can check below complete details about the course:

Courses: The PG level course is offered in different specialisations, including Structural Engineering, CSE and VLSI Design.
Eligibility: The Christ - Kengeri Campus eligibility criteria is "a minimum of 55% aggregate in Graduation".
Selection: The admission is offered on the basis of Karnataka PGCET entrance exam.
Fees: The total tuition fees for M.E./M.Tech courses range from INR 2.18 Lakhs to 2.8 Lakhs.
Placements: In the Christ - Kengeri Campus M.E./M.Tech placements 2023, the median package received by the students stood at 5.4 Lakhs. The highest package offered during placements drive was 21.46 Lakhs. This is the most recent placement information available. Any latest information will be updated here once released.

Check out more details on the course details below:

Return on Investment

Total Tuition Fees₹ 2.2L - 2.8L

Median Package₹ 5.4L

Eligibility Criteria

Accepted Exam

Karnataka PGCET

Graduation score55%

Commonly asked questions
On Highlights

Q: Can students join Christ - Kengeri Campus directly without any entrance exam?

It is not possible to join Christ University's Kengeri Campus directly without any entrance exam. Most courses require candidates to pass the Christ University Entrance Test (CUET) held by the university, and all questions are MCQ-based and are distributed into different parts. However, there are some courses that can be pursued without the need for an entrance exam, but these are limited, and CUET remains compulsory for most.If a candidate does not have any entrance exam/test score or has a low percentile in other entrance exams, they can get direct admission to Christ University Bangalore through management quota

Q: What is the process of admissions at Christ University Kengeri Campus?

Christ University Kengeri Campus course admission is online for all the course. The student need to fill the application form released by the college to take part in the admission process. For some courses like BTech, BBA, BSC Pshychology, etc. the score of entrace test is important. For courses like BArch there is no entrance exam. For MBA courses, the score of competitive exams like CAT, XAT, GMAT, etc. are important. The students interested in admissions must know the eligibility criteria and apply accordingly.

Q: Is application fee refundable at Christ University Kengeri Campus?

Filling the application form is the first & important step for taking admissions at Christ Kengeri. The application fee needs to be paid at the last step of the form. The fee is different for different streams, years and categories. This application fee is not generally refundable. Once you have paid the application fee you cannot ask for refund even if you don't want to move further with the application process.

Q: What is the application fee to apply at Christ University Kengeri Campus?

The general application fee INR 1,800 & for NRI / International students, the fee is USD 100. The application fee for each streams and year varies every year. The fee also depends on different categories. Application form is there on the college page. After filling all the details & uploading the required documents, the students need to pay the fee at the last step. Once the fee is paid, the application is successfully submitted.

Christ University Kengeri Campus M.E./M.Tech
Popular courses

Search for specializations in M.E./M.Tech

Filter

Specialization

Exams Accepted

Total Fees

Streams

4 More

Showing 5 Courses

M.Tech in Electronics and Communications Engineering (VLSI and Embedded Systems)

2 years

Seats Offered

Exams Accepted

Karnataka PGCET

Median Salary

₹5.4 LPA

Total Tuition Fees

₹2.22 L

Get Fee Details

M.Tech in Civil Engineering (Structural Engineering)

4.02 years

Seats Offered

Exams Accepted

Karnataka PGCET

Median Salary

₹5.4 LPA

Total Tuition Fees

₹2.18 L

Get Fee Details

M.Tech. in Computer Science and Engineering

2 years

Seats Offered

Exams Accepted

Karnataka PGCET

Median Salary

₹5.4 LPA

Total Tuition Fees

₹2.78 L

Get Fee Details

M.Tech in Mechanical Engineering (Machine Design- Digital Twin)

2 years

Seats Offered

Exams Accepted

Karnataka PGCET

Median Salary

₹5.4 LPA

Total Tuition Fees

₹2.18 L

Get Fee Details

M.Tech. in Data Science

2 years

Seats Offered

Exams Accepted

Karnataka PGCET

Median Salary

₹5.4 LPA

Total Tuition Fees

₹2.8 L

Get Fee Details

Christ University Kengeri Campus M.E./M.Tech
Christ - Kengeri Campus M.E./M.Tech Fees 2026

Christ - Kengeri Campus M.E./M.Tech total fees for the 2 year course ranges between INR 3.55 Lakhs and 4.22 Lakhs. In the total fees of the course, the tuition fees ranges from INR 2.18 Lakhs to 2.8 Lakhs. Below are details for Christ - Kengeri Campus M.E./M.Tech fees:

Fee components	Amount (for 2 years)
Tuition	₹ 2.18 L - 2.8 L
Hostel	₹ 1.29 L - 1.34 L
One-time Payment	₹ 8 K
Total fee	₹ 3.55 L - 4.22 L

These are estimated fees information. Actual values may differ.

The value for money rating of this course is 4.0/5 (1 Reviews).View placement details

Get Admission Details

Recommended Colleges

Explore popular similar colleges

Students who showed interest in Christ University Kengeri Campus - M.E./M.Tech also showed interest in

RV University institute image

Bangalore

Courses Offered2 courses

Total Fees₹7.50 L

Faculty of Engineering and Technology, M.S. Ramaiah University of Applied Sciences institute image

Bangalore

Courses Offered9 courses4.7

Total Fees₹5.00 L

PES University institute image

Bangalore

Courses Offered17 courses4.1

Total Fees₹2.40 L

Ramaiah Institute of Technology institute image

Bangalore

Courses Offered17 courses4.4

Total Fees₹2.99 L

Want better recommendations?

There is a 90% more chance of getting best college recommendations by sharing preferences.

+ Add preferences

School of Engineering, Presidency University, Bangalore institute image

Bangalore

Courses Offered5 courses3.6

Total Fees₹1.80 L

R.V. College of Engineering institute image

Bangalore

Courses Offered13 courses4.4

Total Fees₹2.00 L

REVA University institute image

Bangalore

Courses Offered14 courses4.0

Total Fees₹6.00 L

Jain Deemed -to- be University, Faculty of Engineering and Technology institute image

Bangalore

Courses Offered16 courses4.2

Total Fees₹3.50 L

BMS College of Engineering institute image

Bangalore

Courses Offered10 courses4.6

Total Fees₹3.00 L

Confused about which college or exam to opt for? assitentRcpRhsImage

Chat with our counselor
Get your personalised list of colleges & exams matching your preferences

View allCollections

Is this recommendation relevant?

Christ University Kengeri Campus MTech Admission Dates 2025

Christ University Kengeri Campus MTech admisson dates for 2025 were out with the release of the application form on March 16, 2025. The last date to submit the online application form for the May admission round is March 16, 2025. Further, the Christ University Kengeri Campus selection process will be conducted between May 23 and May 24, 2025. Find below the more dates on MTech course admission for 2025:

Dates	Upcoming Events
28 Sep '26 - 7 Oct '26	Karnataka PGCET 2026: Fee Payment for Round 1 Allotted Candidates
28 Sep '26 - 7 Oct '26	KEA PGCET 2026 Round 1 Counselling: Confirmation Slip Download

Dates	Past Events
19 Sep '26 - 22 Sep '26	Karnataka PGCET 2026 Option Modification
19 Sep '26 - 22 Sep '26	Karnataka PGCET 2026 Option Edit Facility after Mock Allotment

Christ University Kengeri Campus MTech Admission 2025: How to Apply?

For Christ University Kengeri Campus, MTech admission is conducted in March and May. The MTech admisson process is inclusive of the admission process, inclusive of application, appearance in the selection rounds, offline admission process, and document verification. However, before beginning to apply for the course, candidates must have a basic knowledge of the MTech course. A step-by-step Christ University Kengeri Campus admission process that students need to follow is as follows:

Step 1: Christ University Kengeri Campus MTech Application Process

The application process for the MTech course at Christ (Deemed-to-be University) will close approximately a week before the scheduled selection process. Students can fill out the Christ University application form on the official website. Find below the steps for the application process:

Step 1.1: Visit the official website and click on 'Admission', followed by clicking on the level of the course students wish to get into.

Step 1.2: Select the school under Christ where the desired course is offered.

Step 1.3: Select the desired course and click on 'Apply Now' written against it.

Step 1.4: Register as a new user by entering the name, contact number, email-id and creating a password.

Step 1.5: Log in again and fill out the complete application form. Pay the application fee and submit the form.

Christ University Kengeri Campus MTech admission registration fee is INR 5,000 for all programmes.

Step 2: Selection Rounds

The Christ University Kengeri Campus MTech selection process is inclusive of Skill Assessment (SA), Micro Presentation (MP), and Personal interview (PI). For the SA, the applicants will be given a topic to write. Further, for the MP round candidate should be able to talk for 90 seconds, on a topic given by the panel. Finally, for the PI rounds, the candidate will be interviewed for ten minutes. The selection process (SA_MP_PI) will be held in person at the venue selected while submitting the application form online

Step 3: Merit Lists/ Offer letter

Once the Christ University Entrance Test scorecards are released, candidates are offered admission based on the results in an electronic format via mail. The results of the selection process will be available on the official website. Additionally, selected candidates receive an E-Offer of admission that is valid up to the date mentioned in the offer letter.

Step 4: Document Verification & Payment of Admission Fee

Candidates must choose a preferred date and time from available options to facilitate a smooth admission process. However, the fee payment must be done online. Candidates are required to pay the fee for the first year, including the Admission Registration Fee, in full as part of the admission process. Followed by this, students are required to go through the document verification and are informed about the date of commencement of the course.

Commonly asked questions
On Application Process

Q: What is the selection procedure to take M.Tech admission at Christ University Kengeri Campus?

The Christ University Kengeri Campus M.Tech selection process is inclusive of Skill Assessment (SA), Micro Presentation (MP), and Personal interview (PI). For the SA, the applicants will be given a topic to write. Further, for the MP round candidate should be able to talk for 90 seconds, on a topic given by the panel. Finally, for the PI rounds, the candidate will be interviewed for ten minutes. The selection process (SA_MP_PI) will be held in person at the venue selected while submitting the application form online.

Got more queries?

AskShikshaGPT on App

Christ University Kengeri Campus M.E./M.Tech
Christ - Kengeri Campus M.E./M.Tech Seats 2026

Christ - Kengeri Campus has a total sanctioned intake of 72 students, which is spread across all the M.E./M.Tech courses. At this college, M.E./M.Tech seats are the highest for M.Tech in Civil Engineering (Structural Engineering) with 18 seats, while the lowest are for M.Tech. in Data Science with 12 seats. The institute might also follow the seat reservation policy as mandated by the central or state government. Given below is the seat matrix for Christ - Kengeri Campus M.E./M.Tech programmes:

Total Seats Available

Courses	Seats
M.Tech in Civil Engineering (Structural Engineering)	18
M.Tech. in Computer Science and Engineering	18
Discontinued (June 2023) M.Tech. in Information Technology (Data Analytics)	18
M.Tech in Mechanical Engineering (Machine Design- Digital Twin)	12
M.Tech in Electronics and Communications Engineering (VLSI and Embedded Systems)	12

Commonly asked questions
On Seats

Christ University Kengeri Campus MTech VS Other Similar Institutes/Universities

Christ University Kengeri Campus is a constituent of Christ Deemed-to-be University, a private deemed-to-be-university located in Bengaluru, Karnataka, India. The following table shows the Christ University Kengeri Campus MTech course comparison with other Universities located in Bangalore based on their tuition fee and rating:

University Name	Tuition Fee	Shiksha Rating
MTech at Christ University, Kengeri Campus	INR 1.7 Lakh - INR 2.1 Lakh	4
MTech at NHCE Bangalore	INR 2 Lakh	4.1
MTech at Don Bosco Institute of Technology	INR 1.3 Lakh - INR 4 Lakh	3.7

NOTE: *This information is sourced from the official website/ sanctioning body and is subject to change.

Candidates can find below the Christ University Kengeri Campus comparison with other institutions:

College	Median Salary	Total Tuition Fees	Ranking
Christ University Kengeri Campus	₹ 5.4 LPA	₹ 2.18 L - 2.8 L	-/-
RV University Bangalore Compare	-/-	₹ 7.5 L	-/-
Faculty of Engineering and Technology, MSRUAS	₹ 6 LPA	₹ 5 L - 8 L	-/-
PES University Compare	-/-	₹ 2.4 L - 15.6 L	-/-
Ramaiah Institute of Technology Bangalore Compare	₹ 6 LPA	₹ 2.99 L	-/-

The values are of the latest years available with Shiksha. For more details, check detailed comparison

View comparisons

Christ University Kengeri Campus M.E./M.Tech
Explore Other Courses

Christ University Kengeri Campus MTech Schoalrships

Christ Kengeri offers scholarships as awards and fee concessions to students who are officially admitted to the BTech cousre. The 'Merit scholarships' are offered to students based merit of the pre-entry marks, mid-semester test, and attendance in regular classes. Further, the 'Scholarship for Financial Assistance' is offered to economically weak but diligent students, especially from rural areas. As per the Christ Kengeri scholarships, candidates whose fee ranges up to INR 10,000 will be given a 50% refund of fees, candidates whose fees range from INR 10,000 to INR 25,000 will be given a 25% fee refund, and those whose fee ranges above INR 25,000 will be given a 10% refund of fees.

Commonly asked questions
On Scholarships

Q: What are the scholarships for Christ University Kengeri Campus MTech?

Christ University's Kengeri Campus scholarship is given for the MTech course to support students. Below are some of the scholarship programs available:

Merit-Based Scholarships
Need Based Scholarships:

Christ University Kengeri Campus M.E./M.Tech
Students Ratings & Reviews

4.2/5

9 Verified Reviews Info Icon

4-5
5
3-4
4

Placements3.4

Infrastructure4.6

Faculty & Course4.1

Campus Life4.8

Value for Money4.2

Roshan Varma Verified Icon

M.Tech in Civil Engineering (Structural Engineering) - Batch of 2021

4.0

4.0Placements4.0Infrastructure4.0Faculty4.0Crowd & Campus Life4.0Value for Money

College is good and several students come from various backgrounds and states.

Placements: Around 85% of students get placements. The highest package is around 14 LPA, the lowest is 4 LPA and the average is 5-6.5 LPA. This college is good in terms of value for money and good ROI. Many students get placed and other goes for off campus and many handle their traditional business.

Infrastructure: The campus is Huge with a very good infrastructure far from the city and filled with greenery on Highway so there are some problems related to Travelling and Hangouts. Hostel food is somewhat okay not too bad but manageable. The library and Classroom are great. Sports and Canteen and medical facilities are available.

Faculty: The teachers were absolutely great and highly knowledgeable. They were very punctual about the assignment submission dates. Teachers are helpful and communicate well with students. They are very friendly and guide you in the best way. There also will be various Activities and Events going on with a full packed schedule.

Other: I was very much interested in this course and in Bangalore I think this was the best option for me and it has a good Brand Value.

Reviewed on 20 Oct 2020Read More

Hari Ayappan Verified Icon

Discontinued (DEC 2025) M.Tech. in Power Systems - Batch of 2020

4.2

4.0Placements4.0Infrastructure4.0Faculty5.0Crowd & Campus Life4.0Value for Money

Review of Faculty of Engineering, Christ.

Placements: Placements are good with reasonable salary packages. Almost every student get placed by the end of March. The highest salary package offered is around 14 LPA and the average lowest salary package offered is around 6 LPA. Mostly the highest salary packages will be bagged by marketing students. Other specialisation students also get good salary packages.

Infrastructure: The college has an awesome infrastructure with all necessary facilities. The campus is huge and is located in the heart of the city. There are forensic labs in the campus for finance students and other useful labs for other specialisation students, which help them in getting practical exposure related to the market.

Faculty: Faculty members are exceptionally well, and they have industry experience of more than 10 years. The course curriculum is designed as per the current market trends and as per the expectation of the industrialist. The curriculum is more research-oriented. Faculty members expect more research work in the assignments also. Next year onwards students have to take master thesis mandatorily.

Other: The college is good and accredited with AA by NAAC.

Reviewed on 8 Aug 2019Read More

Anonymous

M.Tech. in Computer Science and Engineering - Batch of 2017

4.4

4.0Placements5.0Infrastructure4.0Faculty5.0Crowd & Campus Life4.0Value for Money

Absolutely satisfied with the college, a great infrastructure and a clean campus.

Placements: We had placements for the master's courses in our college, but the placements were less as compared to the undergraduate courses as the companies preferred the undergraduate students. The highest package offered for the year 2016-2017 was Rs. 15 lacs per annum. The master's students in computer science and engineering were offered various roles like a developer, a data analyst, a quality analyst, and so on.

Infrastructure: We have world-class infrastructure provided by our management. All the classrooms are smart classrooms with a screen and a projector. We have Wi-Fi facility available on the campus which is accessible to all the students. The labs had top-class facilities and all the necessary licensed software for the students use. The college library is fully functional with books and journals available 24x7 for the students to use. The sports room and the gym are also great and are frequently used by the students. The hostel rooms are very well-maintained with timely cleaning by the support staff.

Faculty: All the faculty members who I worked with during the course of two years time were really helpful and guided me throughout the curriculums. Most of them were PhD holders or had enrolled for one. Their immense knowledge in the subject helped us in working with our master's project.

Reviewed on 24 Nov 2017Read More

(3)

3 people found this helpful

SOURAV KAR Verified Icon

Discontinued (June 2023) M.Tech. in Communication Systems (IC Design) - Batch of 2018

5.0

5.0Placements5.0Infrastructure5.0Faculty5.0Crowd & Campus Life5.0Value for Money

Good college for being a quality engineer and a good human being.

Placements: From the previous year's point of view, the placements are fine. Few seniors got internships in private firms, and some got referred to some domain based companies in Bangalore. The companies that visited the campus are L & T, Schneider Electric and Festo India. The roles given were: trainee engineers, site engineers, and RF engineers.

Infrastructure: The facilities are available on the campus. Projectors are installed in the classrooms. The labs have required software installations. Food is good on the campus as we have 4 canteens and 3 food stores. The hostel is nice and well furnished. We did not face any infrastructure-related issues.

Faculty: The faculties are nice, helpful, qualified and knowledgeable. Various methods used for teaching include board work and online work. The student-faculty ratio is 4:1. We have got industry exposure. The curriculum is very much helpful for us. They were very much useful.

Reviewed on 10 Oct 2017Read More

ATISH SHAW Verified Icon

M.Tech in Mechanical Engineering (Machine Design- Digital Twin) - Batch of 2018

4.8

4.0Placements5.0Infrastructure5.0Faculty5.0Crowd & Campus Life5.0Value for Money

A good and disciplined college.

Placements: The placements are good. Good companies visit, and industry exposure is also good. The average package will range from 2 lakhs per annum. The faculty members are good, and the teaching is also fine. Top multi-national companies like Nissan and Renault have research centres in Christ university for the students.

Infrastructure: The infrastructure is one of the most beautiful campuses in all colleges of Bangalore. The total area of the campus is around 90 acres. The campus has 24*7 Wi-Fi facility. The classrooms are spacious. The hostel facilities are also good. 24*7 medical facilities are also available. Sports, games and 3 football grounds are provided as well.

Faculty: The faculty are good and helpful. They will help you in every possible manner. Regarding your subjects, in the mechanical department, teachers are the best. You can learn as much as you want. The faculty will give assignments, and you need to complete them on time. The library time is up to 8 pm.

Reviewed on 10 Oct 2017Read More

Manohar Varma Verified Icon

Discontinued (DEC 2025) M.Tech. in Power Systems - Batch of 2015

3.6

2.0Placements5.0Infrastructure3.0Faculty4.0Crowd & Campus Life4.0Value for Money

Come and experience the Christ University.

Placements: Though we are the first batch, a couple of companies visited our campus. The average salary offered by the companies was Rs. 2 lakhs per annum and the students were offered the designation of Project Trainer. The students got the internship in different corporate companies, but they did not get any stipend. They did get a valuable experience than the stipend instead.

Infrastructure: The facilities on the campus are top-notch. The whole campus is interconnected with Wi-Fi but the social networking sites are blocked. All the classrooms are smart classrooms, and the library has a good number of books and volumes available. There is no special medical facility on the campus but a doctor used to visit the campus twice in a week. All kinds of sports facilities are available here.

Faculty: Each department has a healthy students-faculty ratio. The faculty members are well-qualified and knowledgeable, and all the students are cable of doing the in-house projects with their help. All the faculty members are accessible anytime, and they will take care of the students at the time of examinations.

Reviewed on 1 Dec 2016Read More

Christ University Kengeri Campus

Student Forum

Anything you would want to ask experts?

Write here...

How can I get admission in Christ Kengeri?

Answered 2 months ago

Christ University Kengeri admission is divided into two parts, i.e. programmes with Entrance Test and programmes without Entrance Test. BTech, BBA, and BSc (Psychology), admission is entrance-based. Whereas, M.Tech and B.Arch admission is based on Skill Assessment Test, MP and PI in Kengeri campus

Gaurika Chhabra

Contributor-Level 10

Which documents are required for MBA admission in Christ University Kengeri?

Answered 2 months ago

Documents required for MBA admission in Christ University Kengeri are as follows:

Class 10 Certificate or Marksheet
Class 12 Certificate or Marksheet
Graduation degree or provisional certificate
Work experience letter - if applicable
Entrance exam scorecard
Passport-size photograph
Aadhaar card or any vali

Saumya Gairola

Contributor-Level 10

Which entrance exams are accepted for MBA admission in Christ University Kengeri campus?

Answered 2 months ago

Christ University accepts valid score in CAT/ MAT/ XAT/ CMAT/ ATMA/ GRE/ GMAT Focus for admission in MBA at its Kengeri campus. The duration of Christ Kengeri MBA is 2 years.

Saumya Gairola

Contributor-Level 10

How can I get admission in BSc at Christ University Kengeri?

Answered 2 months ago

To get admisison in Christ University Kengeri BSc, students must have 50% in Class 12. The selection for all the BSc courses is subject to Online entrance test conducted by the university, Micro Presentation (MP), Personal Interview (PI) conducted with the candidates along with their performance in

Gaurika Chhabra

Contributor-Level 10

Can I get admission in PG engineering courses at Christ Kengeri with 45% in graduation?

Answered 2 months ago

No, students cannot get admission in Christ University Kengeri Campus MTech, with 45% in graduation. To be eligible, students must pass BTech / B.E with 55% aggregate. The selection process is inclusive of skill assessment (SA), micro presentation (MP), and the personal interview (PI).

Gaurika Chhabra

Contributor-Level 10

Content authored by: