M.Tech. in Construction Planning and Management
- Public/Government Institute
- Estd. 1946
M.Tech. in Construction Planning and Management at JNTUACEA Overview
M.Tech. in Construction Planning and Management
at JNTUACEA
JNTUA College of Engineering, Ananthapuramu offers a 2 years M.Tech. in Construction Planning and Management at the PG level. The total tuition fee for the entire duration of this programme is INR 60,000. A total of 9 students can pursue the course at JNTUA College of Engineering, Ananthapuramu.
Total Tuition Fees | ₹60,000 Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 9 |
Type of University | Public/Government,Autonomous |
M.Tech. in Construction Planning and Management
Table of content
M.Tech. in Construction Planning and Management at JNTUACEA Fees
M.Tech. in Construction Planning and Management
at JNTUACEA
JNTUA College of Engineering, Ananthapuramu M.Tech. in Construction Planning and Management fee is collective of various components, such as the tuition fees, one-time charge, hostel fees, registration fees, examination fees, and other basis. However, there may be additional fees that students might be required to pay that are particular to the institution. At JNTUA College of Engineering, Ananthapuramu, the total tuition fee for M.Tech. in Construction Planning and Management is INR 60,000. Here is the information about the JNTUA College of Engineering, Ananthapuramu M.Tech. in Construction Planning and Management fee breakup:
| Fee components | Amount (2 years) |
|---|---|
The above fees is calculated basis first year. Actual fee may vary.
The mentioned fees is as per Andhra Pradesh State Council for Higher Education. | ₹ 60,000 |
₹ 60,000 |
These are based on information available on various sources. Latest values may differ.M.Tech. in Construction Planning and Management at JNTUACEA Frequently Asked Questions
M.Tech. in Construction Planning and Management
at JNTUACEA
Q: How much rank should I score to get JNTUA?
A:
JNTUA cutoff 2024 has been released for the Last Round. As per the JNTUA cutoff 2024 released for the BTech courses, the required rank should ranged between . Considering the Last Round cutoff, the required rank needed would be varied from 6855 to 136972 for getting admission at JNTUA.
Further, check out the courses available under this range for the General AI candidates as per the JNTUA Last Round cutoff 2024:
| Course | 2024 |
|---|---|
| B.Tech. in Civil Engineering | 43852 |
| B.Tech. in Electrical and Electronics Engineering | 16442.1 |
| B.Tech. in Mechanical Engineering | 33700 |
| B.Tech. in Electronics and Communication Engineering | 6855 |
| B.Tech. in Chemical Engineering | 66065 |
| B.Tech. in Computer Science and Engineering | 136972 |
AskShikshaGPT on App
Q: Who are the top recruiters from JNTUA College of Engineering, Ananthapuramu when it comes to placements?
A:
JNTUA College of Engineering, Ananthapuramu has placed its selected students in known and reputed companies such as Samsung R And D Institute India Noida, Edvizo, Grab India, Linuxbean Pvt Solution, Aorborc Technologies Pvt Ltd, Hipe, Indusnet Techshu, Ekant Solutions, Matchwell Engineering Pvt. Ltd, Edynamic.
AskShikshaGPT on App
Q: What is the eligibility to get admission in JNTUA College of Engineering, Ananthapuramu for UG/PG courses?
A:
JNTUA College of Engineering, Ananthapuramu has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| B.E. / B.Tech | Candidate must have passed diploma in engineering/technology or 3 years B.Sc degree with Mathematics as one of the subjects And secured at least 45% marks (40% marks reserved category) from a recognized university. |
| MCA | Candidate must have passed bachelor degree of 3/4 years duration with Mathematics as one of the subject at Intermediate or Degree level with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission. |
| MBA/PGDM | Candidate must have completed bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission. |
| M.E./M.Tech | Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis. |
AskShikshaGPT on App
Download exam sample paper
AP PGECET
AP PGECET
GATE
M.Tech. in Construction Planning and Management at JNTUACEA Placements
M.Tech. in Construction Planning and Management
at JNTUACEA
| Particulars | Statistics (2024) |
|---|---|
| Median Salary | INR 4.20 Lakh |
M.Tech. in Construction Planning and Management at JNTUACEA Entry Requirements
M.Tech. in Construction Planning and Management
at JNTUACEA
General
Graduation
- 50%
- Read more
Candidate must have passed B.E./B.Tech. in relevant stream and obtained with the mentioned marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
AP PGECET
GATE
Other eligibility criteria
Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC
approved institution recognised by the Government of Andhra Pradesh as equivalent thereto.
Final year appearing students may also apply on provisional basis.
M.Tech. in Construction Planning and Management at JNTUACEA Admission Process
M.Tech. in Construction Planning and Management
at JNTUACEA
Important Dates
ALL
GATE
AP PGECET
Jan 2, 2026
GATE 2026 Admit Card
Feb 7, 2026
GATE 2026 Exam
Feb 8, 2026
GATE 2026 Exam
Explore Courses offered by JNTUACEA
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by JNTUACEA
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Compare Courses From Similar Colleges
₹1.8 L
Overall Rating– / –
₹1.14 L
Overall Rating– / –
₹85.96 K
Overall Rating– / –
₹1.1 L
Overall Rating
2.2
2.2₹1.3 L
Overall Rating– / –
₹1 L
Overall Rating– / –
₹86 K
Overall Rating– / –
₹80 K
Overall Rating– / –
₹1 L
Overall Rating– / –
Similar courses in the same city
– / –
Overall Rating– / –
– / –
Overall Rating– / –
₹1.14 L
Overall Rating– / –
M.Tech. in Computer Science and Engineering
Offered by Anantha Lakshmi Institute Of Technology and Sciences₹1 L
Overall Rating– / –
₹1 L
Overall Rating– / –
M.Tech. in Computer Science and Engineering
Offered by College of Engineering and Technology, Sri Krishnadevaraya University₹1 L
Overall Rating– / –
₹80 K
Overall Rating– / –
₹1.34 L
Overall Rating– / –
M.Tech. in Structural Engineering
Offered by St. Mark Educational Institution Society Group of Institution₹1.14 L
Overall Rating– / –
₹1 L
Overall Rating– / –
M.Tech. in Construction Planning and Management at JNTUACEA Students also asked
M.Tech. in Construction Planning and Management
at JNTUACEA
Q: Is JNTUA College of Engineering, Ananthapuramu a good college/Institute?
A:
JNTUA College of Engineering, Ananthapuramu is a reputed institute for B.Tech, MCA, MBA/PGDM, M.E./M.Tech. Students can opt these programs to pursue their career in Engineering, IT & Software, Business & Management Studies. Institute has trained & experienced faculty who deliver these programs. JNTUA College of Engineering, Ananthapuramu has a review rating of 3.7 on the basis of reviews by students. In addition to this, it has been rated 3.9 on campuslife, 3.3 on placements, 3.5 on faculty and 3.7 on Infrastructure.
AskShikshaGPT on App
Q: How many seats are available for various courses offered at JNTUA College of Engineering, Ananthapuramu?
A:
Courses offerred by JNTUA College of Engineering, Ananthapuramu are approved by eminent Government bodies like AICTE. The combined seats available for courses offered at JNTUA College of Engineering, Ananthapuramu goes up to 1144.
AskShikshaGPT on App
Q: What is the median package offered at JNTUA College of Engineering, Ananthapuramu during placements?
A:
JNTUA College of Engineering, Ananthapuramu offers median package range of INR 376,308 during in-campus placements. It has a decent placement assistance program and has been rated 3.3 on placements as per Shiksha verified reviews by students.
AskShikshaGPT on App
M.Tech. in Construction Planning and Management
at JNTUACEA
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in AnantapurJNTUA College of Engineering, AnanthapuramuCoursesM.Tech. in Construction Planning and ManagementM.Tech. in Construction Planning and Management at JNTUACEA News & Updates
M.Tech. in Construction Planning and Management
at JNTUACEA
Latest
Popular
Dhanya B · Nov 14, 2025
1.2L views
UPASANA PRADHAN · Nov 13, 2025
5.7K views
UPASANA PRADHAN · Nov 12, 2025
11.7K views
M.Tech. in Construction Planning and Management at JNTUACEA Contact Information
M.Tech. in Construction Planning and Management
at JNTUACEA
Useful Links
Know more about JNTUACEA
- All About JNTUACEA
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- JNTUACEA Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- JNTUACEA Faculty
- Compare JNTUACEA
- JNTUACEA Q&A
Know more about Programs
- Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering