Civil Engineering colleges in Telangana

According to Shiksha verified reviews, for the faculty Holy Mary Institute of Technology & Science have rating of 3.46. It represents that Institute has good, qualified and experienced faculty members.

Some medical field which offer best work and life balance are shown below -

• Dentistry (BDS & MDS) – Fixed clinic hours, fewer emergencies.

• Pharmacy (BPharm & MPharm) – Less stress compared to hospital-based jobs.

• Physiotherapy (BPT & MPT) – Flexible working hours, minimal emergency calls.

• Public Health & Community Medicine – Focus on preventive healthcare rather than emergency treatments.

• Clinical Research & Medical Writing – Research-based work with no direct patient responsibilities.

The fee bracket for programs offerred by the Marri Laxman Reddy Institute of Technology and Management (MLRITM) is approximately INR 60000 - INR 400000.

Nawab Shah Alam Khan College of Engineering and Technology (NSAKCET) is a good institution for M.E./M.Tech, After 10th Diploma, B.E. / B.Tech, UG Diploma courses, and these programs are delivered by highly experienced faculty. Major specialisation at Nawab Shah Alam Khan College of Engineering and Technology (NSAKCET) are Computer Science Engineering, Civil Engineering, Mechanical Engineering, VLSI Design, Electronics & Communication Engineering, Electrical Engineering, Information Technology.

Engineering job profiles vary across the industry as well as the domain where the person is recruited. Since the popular industries include petrochemicals, civil engineering, construction and other allied industries, the following job profiles are very popular and offer promising career opportunities

Job Profile	Average Annual Income (INR)
Software Engineer	4-8 LPA
Civil Engineer	3-6 LPA
Petroleum Engineer	5-8 LPA
Mining Engineer	4-7 LPA
Mechanical Engineer	3-6 LPA
Aeronautical Engineer	4-7 LPA
Metallurgical Engineer	4-6 LPA
Electrical Engineer	3-6 LPA
Electronics Engineer	3-6 LPA
Chemical Engineer	4-6 LPA

Note- The salary is taken from external sites and may vary.

More about -

Engineering Career

JNTUH College of Engineering Jagtial, Jawaharlal Nehru Technological University, Hyderabad has been rated 4.2 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Quli Qutub Shah Government Polytechnic College has been rated 2.93 on Placements on the basis of 10 reviews given by the students.

The clubs and organizations that are available at Jawaharlal Nehru Technological University Hyderabad are given below:

• Coding Club
• Ragavarsha Club
• Robonauts Club
• Watts Guild Club
• Film and Videography Club
• Idea, Career guidance and Entrepreneurship Club
• Career Development and Alumni Connect
• Literary Club
• Google Developer Students Club
• KHEL KORNER
• Shutter up/ Photography Club
• Elite Feet
• Art Meraki
• Environmental Committee Club

Sri Indu College of Engineering and Technology has been rated 3.9 on Infrastructure parameter. Sri Indu College of Engineering and Technology provide good facilities all around the campus such as Auditorium, Cafeteria, Labs, Library, Shuttle Service, Sports Complex, Wi-Fi Campus. Sri Indu College of Engineering and Technology has also been rated 4 for Campuslife.

J.N.Government Polytechnic College have rating of 4.17 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Matrusri Engineering College is a well-known institution for B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Matrusri Engineering College has course specializations in Civil Engineering, Mechanical Engineering, Electrical Engineering, Computer Science Engineering, Electronics & Communication Engineering, Information Technology.

Ashoka Institute of Engineering and Technology is a well-known institution for M.E./M.Tech, MBA/PGDM, B.E. / B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Ashoka Institute of Engineering and Technology has a rating of 2.96 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 2.73 on Campus Life, 2.54 on Placements, 3.18 on Faculty and 3.29 on Infrastructure.

The fees range for courses offerred by the J.B. Institute of Engineering and Technology is around INR 100000 - INR 440000.

International Institute of Management and Technical Studies, Hyderabad is a moderately competitive institute to get into, as its acceptance rate stands at 50%. This figure tells us that almost 50 out of every 100 applicants manage to get enrolled in the institute, which is more than half of all the applicants. Therefore, once an applicant fulfills IIMT Studies Hyderabad and Research admission requirements i.e., competitive grades, standardised test scores, English language requirements as well as relevant documents, they are most likely to secure an admission in the institute. However, students must not take this lightly and apply to the institute within the deadlines in order to get enrolled as a student.

Guru Nanak University has a 100-acre campus with plush green surrounding. The University offers several facilities such as hostel, smart classrooms, bed homeopathy hospital, sports facilities, 15+ centres of excellence, transportation facility with 70+ buses, etc. The campus life is engaging and vibrant as per the student reviews on Shiksha.  

Kakatiya University faculty are trained from time to time to make them have the most advanced knowledge. The Kakatiya University faculty are treated with care. The faculty treats students as friendly and due to this, the students share their problems with the faculty. There are doubt-solving sessions arranged by the faculty members which any student with relevant doubts can attend. 

Malla Reddy Engineering College And Management Sciences has been rated 3.6 on Infrastructure parameter. Malla Reddy Engineering College And Management Sciences has also been rated 3.9 for Campuslife.

The Institute takes pride in offering its students a median placement salary of INR 2.95 LPA, that underscores its dedication to preparing graduates for prosperous careers by providing them with a noteworthy and competitive compensation package.

The fees range for courses offerred by the Kommuri Pratap Reddy Institute of Technology is around INR 54000 - INR 360000.

The seats availability for offered courses at Shadan College of Engineering and Technology goes up to 828. Courses offerred by Shadan College of Engineering and Technology are approved by eminent Government bodies such as AICTE.

Balaji Institute of Technology and Science (BITS Warangal) has placed its selected students in known and reputed companies such as H.G. Infra Engineering Pvt. Ltd., Astamed Healthcare, Green Ripples Pvt Ltd, Grid Inddia Power Cable Pvt Ltd, Indusnet Techshu, Khushaboo Enterpaises, Linpack Technologies Pvt Ltd, Linuxbean Pvt Solution, Pinnacle Academy Of Aviation And Management Studies, Rd Constro Tech, Vilas Rajapkar Consultancy ( Opc ) Pvtltd, Samsung R And D Institute India Noida, Terminal Contacts, Education Instituteo Of Manegment And Engineering Nagpur, Flemings Embedded And Software Solution, K Nagaprathyusha, Larson And Toubro Limited Ahmedanagar Maharashtra, Legal Firm, Lending Club Corporations, Life9 Systems Pvt Ltd, Lifewall Greentech Pvt Ltd, Live India Tech, Lk Engneering Services Sales And Services Industrial Engine Div Indore Pvt Ltd, Loges Condtructions Pvt Ltd.

Yes, Vaagdevi College of Engineering offers scholarship to the students. The college offers scholarship to the meritorious students. Vaagdevi College of Engineering offers state and national scholarships.

Pallavi Engineering College offers admission on the basis of merit and entrance exams. For UG level admissions, candidates must secure a minimum aggregate in Class 12, whereas for PG level admissions, candidates must secure a minimum aggregate in graduation. Furthermore, for a successful application submission, candidates must visit the official website of the Institute and fill out the application form provided. After a successful application submission, candidates will be shortlisted based on the eligibility criteria, and for final admission, shortlisted candidates must pay the fees and confirm the seat.

The university offers more than 15 courses in various streams such as Engineering, Science, Management, etc. The selection criteria is a mix of entrance exams and merit-based as per respective courses. To get admitted to CU, candidates must meet the eligibility criteria set by the university. Apart from the UG and PG courses, the university also offers PhD programme.