M.Tech colleges accepting AP PGECET in Andhra Pradesh

Candidates who want to apply for AP PGECET exam must check eligibility. They must have passed BE or BTech exam and be permanent residents of Andhra Pradesh or Telangana. General category must have secured 50% marks in their qualifying exam, whereas category candidates must have passed 45% marks.

Minimum qualifying mark or score to obtain a rank in AP PGECET is 25%, which is 30 marks out of 120 marks. There is no negative marking. Candidates will be able to check AP PGECET qualifying score on result scorecard.

AP PGECET result date is May 14, 2026. Candidates can check their qualifying status using their registration number and date of birth/password. Result and cutoff will be prepared based on final AP PGECET answer key.

To participate in AP PGECET admission, candidates must meet eligibility criteria, which are as follows-

Particulars	Details
Nationality	Indian and must have Andhra Pradesh domicile
Educational qualification	Bachelor's degree or equivalent
Minimum qualifying mark	50% for general category and 45% for reserved category

In addition, GATE or GPAT qualified candidates can also apply for AP PGECET.

The median salary trends witnessed during Vignan's Foundation for Science, Technology and Research placements over the past three years are presented below:

Particulars	Median Package (2022)	Median Package (2023)	Median Package (2024)
BTech	INR 4 LPA	INR 6.82 LPA	INR 6.96 LPA
MTech	INR 5.07 LPA	INR 5.9 LPA	INR 6.2 LPA

AP PGECET admit card link is now available for download. The link gets updated on the website. Candidates have to provide their details and save their hall ticket to appear for exam.

No, it is not mandatory to attempt all the questions in the Andhra Pradesh PGECET. The Andhra Pradesh PGECET exam pattern describes the structure of the question paper. Candidates will come to know about the types of questions asked, the difficulty level, the marking scheme, etc. The Andhra Pradesh PGECET exam consists of 120 marks with 120 multiple-choice objective-type questions.

JNTUA cutoff 2024 has been released for the Last Round. As per the JNTUA cutoff 2024 released for the BTech courses, the required rank should ranged between . Considering the Last Round cutoff, the required rank needed would be varied from 6855 to 136972 for getting admission at JNTUA.

Further, check out the courses available under this range for the General AI candidates as per the JNTUA Last Round cutoff 2024:

Course	2024
B.Tech. in Civil Engineering	43852
B.Tech. in Electrical and Electronics Engineering	16442.1
B.Tech. in Mechanical Engineering	33700
B.Tech. in Electronics and Communication Engineering	6855
B.Tech. in Chemical Engineering	66065
B.Tech. in Computer Science and Engineering	136972

 

Siddhartha Academy of Higher Education, Deemed to be University has not released its course wise placement statistics for 2025 placement drive. Refer to the table below to know about the overall placement highlights at Siddhartha Academy of Higher Education, Deemed to be University-

Godavari Institute of Engineering and Technology is one of the most authentic institutions for engineering that boasts an appropriate curriculum and robust infrastructure for the campus. This college runs a host of different engineering programs with experienced faculty members emphasizing practically located learning with industry relevance.

Yes, MTech course is available at Aditya University. Aditya University offers a two-year MTech course at the PG level. To be eligible for the award of the degree, candidates shall complete the course in a maximum period of two years from the date of enrolment for the first semester of the course. Candidates must pass graduation (common eligibility) to apply for the MTech course.

AP ICET 2025 registration process usually begins in March. Students interested in applying for the MBA programme at Aditya Institute of Technology and Management through the merit quota should first complete Andhra Pradesh ICET registration. On the basis of Andhra Pradesh ICET scorecard, students get admission in the final merit list.

Vignan's Institute of Information Technology is generally rated as a Tier 2 institution. It is well known for its academic standard and has also won several great rankings, one being NIRF's ranking for engineering 2024 at #201-300 and the Times ranking, 79th in 2023. These rankings point towards some good reputation but certainly do not establish it among the elite tier-1, a set of established universities that includes IITs and NITs. VIIT has focused programs and average placement rates, which has made it a very competitive choice within its tier.

 

Sri Venkateswara College of Engineering, Tirupati has been rated 4.1 on placements on the basis of 389 reviews done by students.

As per information available, Sapient College of Commerce and Management has recorded (aprx) INR 350,000 median salary to students for B.E. / B.Tech course during placements.

Sri Venkateswara College of Engineering and Technology offers admission to the two-year M.Tech course is through GATE/AP PGECET. The degree is offered in affiliation with Jawaharlal Nehru Technological University, Ananthapuramu. This course is offered across five specilisations. These are Data Science, Structural Engineering, Power Electronics and Electrical Drives, CSE, CAD/CAM, VLSI Design.

Rajeev Gandhi Memorial College of Engineering and Technology is a well-known institution for B.E. / B.Tech, M.E./M.Tech, MBA/PGDM, MCA courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Rajeev Gandhi Memorial College of Engineering and Technology has a rating of 3.79 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.85 on Campus Life, 3.54 on Placements, 3.85 on Faculty and 3.98 on Infrastructure.

As per Shiksha verified reviews, QIS College of Engineering & Technology has an impressive review rating of 3.58 by 181 students.

• Candidates need a minimum of 55% aggregate in BTech or equivalent
• For M.Tech Biotechnology: Candidates must have passed the 10+2 examination with 60% marks in aggregate and 60% marks in PCM/PCB group. 
• GATE/PGECET scorecards are accepted for admission

It's really a good experience being here I would say. You will experience the beautiful college life especially with your friends, campus, hostel life. The infrastructure is so good with placements as well. The faculty is also so friendly (interactive). You will learn more about tech life and student's life would be in engineering.

To get admission to BTech course at RVR and JC, students must pass the Andhra Pradesh EAMCET exam. Candidates willing to secure admission to the BTech course need to acquire a cutoff between 4947 and 78641 under General AI quota. Further, 7000 rank is a decent rank to get admission. Candidates can find out below the course available under this rank:

Course	2024
B.Tech. in Civil Engineering	78641
B.Tech. in Mechanical Engineering	60982
B.Tech. in Electronics and Communication Engineering	11128
B.Tech. in Electrical and Electronics Engineering	44199
B.Tech. in Information Technology	13885
B.Tech. in Chemical Engineering	56998
B.Tech. in Computer Science and Business Systems	12116
B.Tech. in Computer Science & Engineering (IoT)	12440
B.Tech. in Computer Science & Engineering (Data Science)	8751

 

Sagi Rama Krishnam Raju Engineering College has below criteria for taking admissions to it's various courses:

Courses	Eligibility
MCA	Candidate must have passed Bachelor degree of 3/4 years duration with Mathematics as one of the subject at Intermediate or Degree level with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.

Vishnu Institute of Technology (VIT Bhimavaram) offers in-campus placement salaries in the range of INR 4.15 LPA to M.E./M.Tech students.

St. Mary's Women's Engineering College has been rated 4.3 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

The fees range for courses offerred by the Narasaraopeta Engineering College INR INR 295,200 under convener quota (Admission through EAPCET based rank) for BTech , For MBA and MCA admissions are based on I-CET entrance ranks and for MTech, it is based on PG CET Entrance ranks.  For MBA the fee is INR 50,400, MCA -INR 56,600 and MTech - INR 51300.

G Pullaiah College of Engineering and Technology is a well-known institution for B.E. / B.Tech, MBA/PGDM, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, G Pullaiah College of Engineering and Technology has a rating of 3.75 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.63 on Campus Life, 3.6 on Placements, 3.95 on Faculty and 3.74 on Infrastructure.

The Aditya University placement recorded in 2024 was comparatively higher than in 2023. The number of students placed increased from over 1,284 in 2023 to 3,024 in 2024. The total number of companies visiting the campus has also increased from 122 in 2023 to 260 in 2024. The following table represents the Aditya Engineering College placement comparison for the past two years:

Particulars	Placement Statistics (2023)	Placement Statistics (2024)
Total students placed	1,284+	3,024+
Companies visited	122	260+