

B.Tech. in Plastic Technology
- A NAAC accredited
- Public/Government University
- Estd. 1990
B.Tech. in Plastic Technology at North Maharashtra University Overview
B.Tech. in Plastic Technology is a Full Time course offered by NMU at the UG level. The 4 years programme was ranked at #201-300 position by NIRF in 2024. There are a total of 15 seats for B.Tech. in Plastic Technology. More details around the NMU B.Tech. in Plastic Technology are presented in the table below:
Duration | 4 years Get Curriculum |
Course Level | UG Degree |
Mode of Course | Full Time |
Average package | ₹ 4.54 Lakh |
Official Website | Go to Website |
Seat breakup | 15 |
Type of University | Public/Government |
B.Tech. in Plastic Technology at North Maharashtra University Rankings
The B.Tech. in Plastic Technology course provided at NMU has been ranked #201-300 by NIRF in the year 2024. However, students must note that the B.Tech. in Plastic Technology course was not ranked individually by NIRF. But the entire B.E. / B.Tech is ranked by NIRF. Hence, it can be said that this ranking reflects the performance of the entire B.E. / B.Tech and not just the B.Tech. in Plastic Technology course. Find out more information on the rankings received by NMU for the B.Tech. in Plastic Technology below:
B.Tech. in Plastic Technology at North Maharashtra University Highlights
- Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
- Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
B.Tech. in Plastic Technology at North Maharashtra University Curriculum
NMU B.Tech. in Plastic Technology curriculum is spread across 4 years. The curriculum is divided into semester-wise/ annual or monthly structure depending on the course structure set by the college. The curriculum PDF can be downloaded from the below link. Students interested in taking admission in NMU B.Tech. in Plastic Technology must check out the course structure available below:
B.Tech. in Plastic Technology at North Maharashtra University Frequently Asked Questions
The NMU Jalgoan BTech fee ranges between INR 1.6 lakh and INR 4.4 lakh. This information is sourced from official website/ sanctioning body and is subject to change. Candidates are required to pay fee after the completion of the selection process to confirm their seat in the university. The duration of the course is for four years. Candidates also need to pay tuition fee semester or annually. Besides, candidates are also required to pay an application fee in the start to register for a course.
During North Maharashtra University placements 2023, the highest and average package offered was INR 22 LPA and INR 4.54 LPA. Over 56 placement campus drives were conducted. 149 students were selected during NMU placements, and the top recruiters include Gadre Marine Export Pvt. Ltd, ICA Pidilite, Indiamart, Kent RO System Ltd., etc. Candidates can check out the sector-wise distribution of placement rates during NMU placements 2022:
Particulars | Statistics (2022) |
|---|---|
Operations | 31% |
Technology | 29% |
General Management | 11% |
Analytics | 9% |
Agriculture and Pesticides | 7% |
IT | 4% |
Sales and Marketing | 4% |
Engineering | 3% |
EdTech | 2% |
As per the official brochure for the NMU BSc in CS course, the intake capacity is nearly 40. Students are admitted to the programme based on the sanctioned seat intake. The selection also depends upon the candidates performance in the last qualifying examination. Further, 70% of seats are for students who have passed qualifying exam from Maharashtra state boards and 30% for candidates of other state boards.
North Maharashtra University is currently accepting applications for certain BSc (Hons) Electronics courses. The eligible students can visit its official website to register and apply. NMU releases its applications generally around June/Jul as per past years' data or information gathered from unofficial sources. Candidates must submit their application on or before the prescribed deadline.
Yes, it is possible to get admission to NMU at 7 percentile in MHTCET MTech. The cutoff percentile varied between 2 and 15.67, for various ME and M.Tech specialisations for the General All India category candidates. Candidates can check the table below to check the cutoff percentile released for the General Home State category candidates:
Download exam sample paper
B.Tech. in Plastic Technology at North Maharashtra University Placements
| Particulars | Statistics (2024) |
|---|---|
| Average Salary | INR 4.54 Lakh |
| Highest Salary | INR 22.00 Lakh |
| Median Salary | INR 3.69 Lakh |
B.Tech. in Plastic Technology at North Maharashtra University Entry Requirements
B.Tech. in Plastic Technology at North Maharashtra University Admission Process
- CounsellingAdmission is through counselling based on the rank obtained in Maharashtra Health and Technical Common Entrance Test (MHTCET). Vacant seats will be filled by the institute based on the rank obtained in JEE-Mains.
Important Dates
B.Tech. in Plastic Technology at North Maharashtra University Cutoffs
MHT CET round-wise cutoff Rank: (General-All India)
| Round | 2019 | 2020 | 2021 |
|---|---|---|---|
| 1 | 76.56 | 79.45 | 23.69 |
MHT CET round-wise cutoff Rank: (General-Home State)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 1 | 54.01 | 62.25 | 61.56 |
| 2 | 9.68 | - | 49.15 |
| 3 | 64.27 | - | 45.98 |
MHT CET round-wise cutoff Rank: (OBC-All India)
| Round | 2020 |
|---|---|
| 1 | 25.17 |
MHT CET round-wise cutoff Rank: (OBC-Home State)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 1 | 1.12 | 60.55 | 53.76 |
| 2 | 15.92 | 55.07 | 42.74 |
| 3 | 55.72 | - | 43.92 |
Explore Courses offered by North Maharashtra University
Other courses offered by North Maharashtra University
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Similar courses in the same city
B.Tech. in Computer Science and Engineering
Offered by G H Raisoni Institute of Business Management, JalgaonB.Tech. in Computer Science
Offered by K. C. E. Society's College of Engineering and Information TechnologyB.E. in Computer Science and Engineering
Offered by Shri Sant Gadge Baba College of Engineering and TechnologyB.Tech. in Computer Engineering
Offered by Khandesh College Education Society'S College of Engineering and ManagementB.Tech. in Plastic Technology at North Maharashtra University Students also asked
Kavayitri Bahinbai Chaudhari North Maharashtra University was awarded with four star grade in the year 2001, a B grade with 2.88 CGPA in the year 2009 and an A Grade with 3.11 CGPA in 3rd Cycle re-accreditation in the year 2015 by National Assessment and Accreditation Council (NAAC), Bangalore. Moreover, the jurisdiction of the NMU is extended over three districts i.e. Jalgaon, Dhule and Nandurbar.
North Maharashtra University offers four-year BTech course spread across eight semesters. BTech is available in five specialisations such as:
- Paint Technology
- Chemical Engineering
- Oil, Fat and Waxe Technology
- Food Technology
- Polymer and Plastic Technology
The highest package offered during NMU placement drive 2023 stood at INR 22 LPA. The table below showcases the highest package offered in the last two years:
| Course | Statistics (2021) | Statistics (2022) |
|---|---|---|
| the highest package | INR 8.5 LPA | INR 22 LPA |
As per the placement report 2023, a total of 1,460 no. of students participated during NMU placements 2023. The table below showcases the batch placed stats recorded for the year 2023:
| Particulars | Statistics (2023) |
|---|---|
| Total campus drive | 56 |
| No. of students selected | 149 |
| No. of students participated | 1,460 |
Student Forum
Answered 7 years ago
r
Guide-Level 14
Content authored by:
B.Tech. in Plastic Technology at North Maharashtra University News & Updates




B.Tech. in Plastic Technology at North Maharashtra University Contact Information
P. O. Box No. 80, Umavi Nagar,
Jalgaon ( Maharashtra)
(For general query)
(For admission query)
Useful Links
Know more about North Maharashtra University
- All About North Maharashtra University
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- North Maharashtra University Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- North Maharashtra University Faculty
- Compare North Maharashtra University
- North Maharashtra University Q&A
- Scholarships
Know more about Programs
- Engineering
- Polymer Technology
- B Tech (Bachelor of Technology)
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering

Can I apply for B.Tech in plastic mould technology in North Maharashtra University after doing Diploma?