M.Tech. in Power Electronics and Drives
at Aditya Engineering College, East Godavari

B+ NAAC accredited
Private Institute
Estd. 2002

M.Tech. in Power Electronics and Drives

Table of contents

Overview
Fees
Placements
Entry Requirements
Admission Process

M.Tech. in Power Electronics and Drives
at
Aditya Engineering College
Overview

Aditya College of Engineering offers M.Tech. in Power Electronics and Drives at the PG level with a duration of 2 years. This course provides candidates with essential knowledge and practical experience for career success. The total tuition fees for this course is INR 1,25,400. A total of 6 students can pursue the course at Aditya College of Engineering.

Total Tuition Fees	₹1.25 Lakh Get Fees details
Duration	2 years
Course Level	PG Degree
Mode of Course	Full Time
Official Website	Go to Website
Seat breakup	6
Type of University	Private,Autonomous

M.Tech. in Power Electronics and Drives
at
Aditya Engineering College
Fees

Aditya College of Engineering fee comprises of various components, including admission fees, tuition fees, medical assistance, university development fees, etc. Some of these components are to be paid semester-wise, while others must be paid yearly. The Aditya College of Engineering total tuition fee for M.Tech. in Power Electronics and Drives is INR 1,25,400. Below mentioned is all the information around fee structure of Aditya College of Engineering M.Tech. in Power Electronics and Drives:

Fee components

Amount (2 years)

Tuition Fees

Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary. The fees might include components other than tuition fees. Mentioned fees is as per Andhra Pradesh State Council fo

₹ 1.25 Lakh

Total fee

₹ 1.25 Lakh

These are based on information available on various sources. Latest values may differ.

M.Tech. in Power Electronics and Drives
at
Aditya Engineering College

Frequently Asked Questions

Q: How is the faculty at Aditya College of Engineering?

Aditya College of Engineering has been rated 4.1 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Got more queries?

AskShikshaGPT on App

Q: Which major specializations are available at Aditya College of Engineering?

Aditya College of Engineering offers Degree and Diploma courses including 11 UG and 6 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Aditya College of Engineering has specializations such as After 10th Diploma specializations in Agriculture & Farm Engineering, UG Diploma specializations in Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, B.Tech specializations in Artificial Intelligence & Machine Learning, Computer Science Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, Civil Engineering, M.E./M.Tech specializations in VLSI Design, Computer Science Engineering, Power Engineering.

Got more queries?

AskShikshaGPT on App

Q: How can I get into Aditya College of Engineering for UG/PG courses? Am I eligible for admission?

Aditya College of Engineering has below criteria for taking admissions to it's various courses:

Courses	Eligibility
MBA/PGDM	Candidate must be a graduate from a recognised University.
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
UG Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.

Got more queries?

AskShikshaGPT on App

Q: Is Aditya College of Engineering a known college/Institute?

Aditya College of Engineering is a well-known institution for MBA/PGDM, After 1th Diploma, UG Diploma, B.Tech, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Aditya College of Engineering has a rating of 4.2 on the basis of reviews by students. Not just this, it has also been rated 4.6 on campuslife, 3.9 on placements, 4.1 on faculty and 4.3 on Infrastructure.

Got more queries?

AskShikshaGPT on App

M.Tech. in Power Electronics and Drives
at
Aditya Engineering College

Students also asked

Q: Which courses does Aditya College of Engineering offer to students?

Aditya College of Engineering has courses such as MBA/PGDM, After 1th Diploma, UG Diploma, B.Tech, M.E./M.Tech to offer. These courses are in the stream of Business & Management Studies, Engineering. Aditya College of Engineering offers specializations such as After 10th Diploma specializations in Agriculture & Farm Engineering, UG Diploma specializations in Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, B.Tech specializations in Artificial Intelligence & Machine Learning, Computer Science Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, Civil Engineering, M.E./M.Tech specializations in VLSI Design, Computer Science Engineering, Power Engineering.

Got more queries?

AskShikshaGPT on App

Q: Does Aditya College of Engineering provide good placement facilities?

Aditya College of Engineering has been rated 3.9 on placements on the basis of 181 reviews done by students. In Aditya College of Engineering, 602 students were admitted in year 2015-16, out of which 401 graduated in 2018-19. From this, 190 qualified students got placed with a median salary of INR 300000 and 56 students got selected for higher studies. In year 2016-17, 392 students were admitted, out of which 329 graduated in 2019-20. From this, 180 qualified students got placed with a median salary of INR 300000 and 65 students got selected for higher studies. In year 2017-18, 409 students were admitted, out of which 288 graduated in 2020-21. From this, 207 qualified students got placed with a median salary of INR 380000 and 33 students got selected for higher studies.

Got more queries?

AskShikshaGPT on App

Q: How many seats are available at Aditya College of Engineering for all courses combined?

The overall seats available across all courses offered by Aditya College of Engineering is up to 1302. Good thing to know is that Aditya College of Engineering has courses which are approved by prominent Government bodies like AICTE.

Got more queries?

AskShikshaGPT on App

Download exam sample paper

M.Tech. in Power Electronics and Drives
at
Aditya Engineering College
Placements

Particulars	Statistics (2023)
Median Salary	INR 3.36 Lakh

View placement details

M.Tech. in Power Electronics and Drives
at
Aditya Engineering College
Entry Requirements

General

Graduation Up Arrow Icon

50%
Candidate must have passed B.E./B.Tech. in relevant stream and obtained with the mentioned marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
Read more

AP PGECET

GATE

Other eligibility criteria Up Arrow Icon

Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.