Diploma in Mechanical Engineering
at Universal College Of Engineering And Technology, Guntur

3.4 /5

(1 Review)

Private Institute
Estd. 2008

Diploma in Mechanical Engineering
at
Universal College Of Engineering And Technology
Overview

Universal College Of Engineering And Technology offers various specialisations under its After 10th Diploma programme, including Diploma in Mechanical Engineering. This course runs for 3 years. Moreover, the total tuition fee to pursue this course is INR 72,000. A total of 60 students can take admission to this course. In order to get admission to Universal College Of Engineering And Technology Diploma in Mechanical Engineering course, students must have a valid score in AP POLYCET. Interested students can also check out other After 10th Diploma courses of Universal College Of Engineering And Technology. Also, check out the below table to know more information about Diploma in Mechanical Engineering offered at Universal College Of Engineering And Technology:

Total Tuition Fees	₹72,000 Get Fees details
Duration	3 years
Course Level	After 10th Diploma
Mode of Course	Full Time
Seat breakup	60
Type of University	Private

Diploma in Mechanical Engineering

Table of content

Overview
Fees
Student Reviews
Entry Requirements
Admission Process

Diploma in Mechanical Engineering
at
Universal College Of Engineering And Technology
Fees

For the total course duration, the Universal College Of Engineering And Technology Diploma in Mechanical Engineering tuition fees is INR 72,000. Take a look at the table below for Universal College Of Engineering And Technology Diploma in Mechanical Engineering fees break-up:

Fee components	Amount (3 years)
Tuition Fees Tuition fee is calculated on the basis of 1st year. Actual amount may vary. The above mentioned fee is as per State Board Of Technical Education And Training, Andhra Pradesh.	₹ 72,000
One-time Payment One-time payment includes Alumni Fee.	₹ 100
Total fee	₹ 72,100

These are based on information available on various sources. Latest values may differ.

Diploma in Mechanical Engineering
at
Universal College Of Engineering And Technology
Students Ratings & Reviews

3.4/5

1 Verified Review Info Icon

3-4
1

Placements3

Infrastructure3

Faculty & Course4

Campus Life4

Value for Money3

KANIKUTLA BHARGAV RAJU Verified Icon

Diploma in Mechanical Engineering - Batch of 2022

Offered by Universal College Of Engineering And Technology

3.4

3Placements3Infrastructure4Faculty4Crowd & Campus Life3Value for Money

The college is average in all aspects.

Placements: The highest salary offered is Rs 50,000 and the lowest salary offered is Rs 10,000. The top recruitment company is Magnox. The roles offered are also offered.

Infrastructure: In this college, Wi-Fi is not enabled, and laboratories are average. The classroom and library are good. The food served in the canteen is average, and the sports are average. The medical facilities are also average.

Faculty: Teachers are helpful, qualified, and knowledgeable. The teaching is very good. The course curriculum is relevant, and it makes students ready for industry. Teachers are mostly helpful by the constitution, and students pass the exams.

Other: I opted for this course, because of my interest in this college. Events, fests, campus crowd, and connectivity are average in this college.

Reviewed on 28 Feb 2022Read More

View 1 Review

Diploma in Mechanical Engineering
at
Universal College Of Engineering And Technology

Frequently Asked Questions

Q: Which major specializations are available at Universal College Of Engineering And Technology?

ShikshaGPT says

Universal College Of Engineering And Technology offers Degree and Diploma courses including 6 UG and 4 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Universal College Of Engineering And Technology has specializations such as B.Tech specializations in Computer Science Engineering, Mechanical Engineering, Electronics & Communication Engineering, Civil Engineering, After 10th Diploma specializations in Civil Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, M.E./M.Tech specializations in Computer Science Engineering, Power Engineering, VLSI Design.

Got more queries?

AskShikshaGPT on App

Q: How much placements salary students get after studying in Universal College Of Engineering And Technology?

ShikshaGPT says

Universal College Of Engineering And Technology offers median package range of (aprx)INR 310,000 during in-campus placements. It has a decent placement assistance program as well. Additionally, it has been rated 2.9 on placements as per Shiksha verified reviews by students.

Got more queries?

AskShikshaGPT on App

Q: Which courses are available at Universal College Of Engineering And Technology for students?

ShikshaGPT says

Courses offered by Universal College Of Engineering And Technology are B.Tech, After 1th Diploma, M.E./M.Tech, MBA/PGDM. These courses are in the stream of Engineering, Business & Management Studies. Universal College Of Engineering And Technology offers specializations such as B.Tech specializations in Computer Science Engineering, Mechanical Engineering, Electronics & Communication Engineering, Civil Engineering, After 10th Diploma specializations in Civil Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, M.E./M.Tech specializations in Computer Science Engineering, Power Engineering, VLSI Design.

Got more queries?

AskShikshaGPT on App

Q: Can Universal College Of Engineering And Technology be considered as a reputed Institute?

ShikshaGPT says

The flagship courses offered at Universal College Of Engineering And Technology are B.Tech, After 1th Diploma, M.E./M.Tech, MBA/PGDM. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, Universal College Of Engineering And Technology has a rating of 3.4 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 3.6, 2.9, 3.6 and 3.5 as per reviews by students.

Got more queries?

AskShikshaGPT on App

Q: How can I get into Universal College Of Engineering And Technology for UG/PG courses? Am I eligible for admission?

ShikshaGPT says

Universal College Of Engineering And Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
MBA/PGDM	Candidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.

Got more queries?

AskShikshaGPT on App

Download exam sample paper

Diploma in Mechanical Engineering
at
Universal College Of Engineering And Technology
Entry Requirements

AP POLYCET

Other eligibility criteria Up Arrow Icon

Candidate must have passed 10th grade or S.S.C. Examination conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognized as equivalent thereto by the Board of Secondary Education, A.P/TS, such as Central Board of Secondary Education(CBSE), Indian Council for Secondary Education(ICSE), National Institute of Open School (NIOS), A.P. Open School Society (APOSS), 10th class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates from NIOS/APOSS/other recognized examinations deemed equivalent to SSC by the A.P. Government must have passed all subjects, including Mathematics, Physics, and Chemistry, with a minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in March-2024, and whose results are yet to be declared can also appear for POLYCET- 2024. There is no age restriction for appearing for POLYCET-2024. Candidates must be Indian citizens and residents of the state of Andhra Pradesh.