Diploma in Engineering colleges in Telangana

Listed below are the top private BTech in Mechanical Engineering colleges in India with their tuition fees -

Top Colleges	Tuition Fee
VIT Vellore	INR 7.8 lakh
BITS Pilani	INR 25.85 lakh
SRM IST Kattankulathur	INR 11 lakh
Amrita School of Engineering	INR 14 lakh
Chandigarh University	INR 7.08 Lacs - INR 9.44 lakh

Source: Official site and may vary.

Yes, there are many Mechanical Engineering colleges in India without any entrance exam or accept direct admission of candidates. Listed below are some of the top colleges -

Top Colleges	Tuition Fee
SSN College of Engineering	INR 2 lakh
SIMTS Chennai	INR 1.4 lakh
PSGCT Coimbatore	INR 2 Lacs - INR 2.5 lakh
MIT-WPU	INR 15.75 lakh
SoT, Pandit Deendayal Energy University (PDEU)	INR 12 lakh

Source: Official site and may vary.

To become an Aeronautical Engineer after 10th, focus on Science in 11th/12th (Physics, Chemistry, Maths), pass entrance exams like JEE Main and then pass B.Tech/B.E. in Aeronautical/Aerospace Engineering.

Or you can take a 3-year Diploma in Aeronautical Engineering after 10th to start early. 

Hope this helped solve your doubt! All the best!

The cutoff changes depending on rounds, specialisations, and categories. If you qualify under the General AI quota, the maximum required JEE Main cutoff rank for B.Tech admission was 60255 in 2025.Those who have a lower cutoff than the one specified can get a seat in NIT Warangal BTech. For CSE, ECE, etc., the cutoff ranks tend to be lower showing high competition for admission in the engineering aspirants.

 

Some top BTech scholarships and their key details to earn a B Tech degree are here

BTech College Names	BTech Scholarships
Delhi Technological University Scholarships	Merit Scholarships Scholarship on a merit basis for reserved category students Post Matric Scholarship for SC students
IIT Dhanbad (ISM) Scholarships	Merit Cum Means Scholarship Endowment Scholarship Benevolent Fund ISMAANA Scholarship Sandvik Scholarship
IIT Indore Scholarships	Merit-Cum-Means (MCM) Scholarship Central Sector Scholarship (CSS) Scholarship Foundation for Excellence (FFE) Scholarship TCS Fellowship Scheme National Handicapped Finance and Development Corporation (NHFDC) Scholarship
Lovely Professional University Jalandhar Scholarships	Merit Scholarships Need-Based Scholarships Sports Scholarships Loyalty Scholarships

Note - The information is taken from the official site of the college.

know more about -

BTech Colleges

Some important skills that'll help you succeed faster and easier in the Engineering field are here. Take a look

Technical competence	Good Mathematical skills
Problem-solving ability	Programming languages
Analytical thinking	Critical thinking
Attention to detail

Note - The information is taken from external sites and may vary.

know more about -

Engineering Career

The college to which a student finally gets admitted is Vignana Jyothi Institute of Engineering and Technology which is also known as VNR VJIET of which bifurcation makes it a Tier II engineering college. It is one of the private engineering college situated in Hyderabad, Telangana and is approved by Jawaharlal Nehru Technological University (JNTU) Hyderabad. Though it is a well established college with good infrastructure and faculty members it is not one of the IITs, NITs or other top ranking private engineering colleges like BITS Pilani, IIIT Hyderabad etc. Nevertheless, it is recognised as a college and definitely, students prefer this college in the particular area.

The flagship courses offered at Vardhaman College of Engineering are M.E./M.Tech, B.Tech, MBA/PGDM. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, Vardhaman College of Engineering has a rating of 4.1 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 3.8, 4 and 4.5 as per reviews by students.

St. Martin's Engineering College (SMEC Secunderabad) is a good institution for M.E./M.Tech, B.E. / B.Tech, MBA/PGDM courses, and these programs are delivered by highly experienced faculty. Major specialisation at St. Martin's Engineering College (SMEC Secunderabad) are Power Engineering, Computer Science Engineering, Electronics & Communication Engineering, Civil Engineering, Artificial Intelligence & Machine Learning, Electrical Engineering, Information Technology, Mechanical Engineering.

Avanthi Institute Of Engineering And Technology, Hayathnagar has been rated 3.8 on Infrastructure parameter. Avanthi Institute Of Engineering And Technology, Hayathnagar has also been rated 4.2 for Campuslife.

Sri Datta Institute of Engineering and Science has been rated 4.5 on placements.

St. Mary's Group of Institutions has been rated 4.3 on Infrastructure parameter. Institute has a well supported campus with facilities such as Auditorium, Cafeteria, Gym, Hospital / Medical Facilities, Hostel, Labs, Library, Shuttle Service, Sports Complex, Wi-Fi Campus. St. Mary's Group of Institutions has also been rated 4.3 for Campuslife.

Electrical Engineering professionals are engineering jack of all trades, as they make use of their knowledge of Physics and Mathematics along with computer programming skills to develop intricate circuit systems. These circuit boards run electrical signals to and from electrical components to accomplish everything from a mundane computer startup to controlling absolute power and precision of a rocket going out of earth's atmosphere.

Know more about -

Electrical Engineering Courses

TS EAMCET Counselling process is ongoing. TS EAMCET Seat Allotment results for Phase 1 Counselling are out. To download the allotment order, candidates must login at the official webiste of TS EAMCET at tseamcet.nic.in. 

To be conducted in three phases TS EAMCET 2025 Phase 2 Counselling process began in July, whereas the Final Phase counselling process will begin August. Based on the candidate's achieved ranks, TS EAMCET seats are allocated. 

Government Institute of Electronics have rating of 4.19 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

According to Shiksha verified reviews, for the faculty Kohinoor Technical Institute have rating of 5 It represents that Institute has good, qualified and experienced faculty members.

The fees range for courses offerred by the Vignana Bharathi Institute of Technology is around INR 100000 - INR 340000.

Government Polytechnic College, Hyderabad have rating of 4.54 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Acharya N.G. Ranga Agricultural University appoints well-experienced and trained faculty members and offers quality education to the students. The faculty members holds PhD, diploma, and PG degree from the eminent institutes. They engage the students with the latest activities and innovate teaching and quality research. 

According to Shiksha verified reviews, for the faculty TKR College of Engineering and Technology have rating of 3.87. It represents that Institute has good, qualified and experienced faculty members.

The fees range for courses offerred by the Ellenki College of Engineering and Technology is around INR 44700 - INR 260000.

Mahaveer Institute of Science and Technology is a private college which is accredited with A Grade by NAAC. Mahaveer Institute of Science and Technology is approved by AICTE and is recognised by UGC and the Government of Telangana.

According to Shiksha verified reviews, for the faculty Holy Mary Institute of Technology & Science have rating of 3.46. It represents that Institute has good, qualified and experienced faculty members.

Some medical field which offer best work and life balance are shown below -

• Dentistry (BDS & MDS) – Fixed clinic hours, fewer emergencies.

• Pharmacy (BPharm & MPharm) – Less stress compared to hospital-based jobs.

• Physiotherapy (BPT & MPT) – Flexible working hours, minimal emergency calls.

• Public Health & Community Medicine – Focus on preventive healthcare rather than emergency treatments.

• Clinical Research & Medical Writing – Research-based work with no direct patient responsibilities.

Nawab Shah Alam Khan College of Engineering and Technology (NSAKCET) is a good institution for M.E./M.Tech, After 10th Diploma, B.E. / B.Tech, UG Diploma courses, and these programs are delivered by highly experienced faculty. Major specialisation at Nawab Shah Alam Khan College of Engineering and Technology (NSAKCET) are Computer Science Engineering, Civil Engineering, Mechanical Engineering, VLSI Design, Electronics & Communication Engineering, Electrical Engineering, Information Technology.

The seats availability for offered courses at Central Institute of Tool Design goes up to 539. Courses offerred by Central Institute of Tool Design are approved by eminent Government bodies such as AICTE.

Technical Training Institute DRDO has below criteria for taking admissions to it's various courses:

Courses	Eligibility
After 10th Diploma	Candidate must have passed 10th examination from a recognised board.

Engineering job profiles vary across the industry as well as the domain where the person is recruited. Since the popular industries include petrochemicals, civil engineering, construction and other allied industries, the following job profiles are very popular and offer promising career opportunities

Job Profile	Average Annual Income (INR)
Software Engineer	4-8 LPA
Civil Engineer	3-6 LPA
Petroleum Engineer	5-8 LPA
Mining Engineer	4-7 LPA
Mechanical Engineer	3-6 LPA
Aeronautical Engineer	4-7 LPA
Metallurgical Engineer	4-6 LPA
Electrical Engineer	3-6 LPA
Electronics Engineer	3-6 LPA
Chemical Engineer	4-6 LPA

Note- The salary is taken from external sites and may vary.

More about -

Engineering Career