M.Tech in Mechanical Engineering colleges in Telangana

IIT Hyderabad M.Tech fees is INR 2.63 Lacs in the academic year 2026. The aforementioned fees is charged from regular category students of IIT Hyderabad M.Tech course. However, for government sponsored students, the IIT Hyderabad M.Tech course fees is INR 3.75 lakh.

The aforementioned fees is charged on per semester basis in four instalments.

The key highlights of NIT Warangal placements 2025 as compared with 2023 and 2024 are presented below:

Particulars	Placement Statistics (2023)	Placement Statistics (2024)	Placement Statistics (2025)
Highest package	INR 88 LPA	INR 88 LPA	INR 64.3 LPA
Average package	INR 17.29 LPA	INR 15.6 LPA	INR 14.35 LPA
Median package	INR 12.6 LPA	INR 12.5 LPA	INR 12 LPA
Placement rate	82%	76%	79.3%
Students placed	1,400	1,120+	1201
Offers made	1,400+	1,128+	1225
Companies visited	268	305	290

JNTUH College of Engineering Hyderabad, Jawaharlal Nehru Technological University, Hyderabad offers Degree courses including 27 UG and 38 PG courses. These programs are offerred in Full Time and Part Time mode. JNTUH College of Engineering Hyderabad, Jawaharlal Nehru Technological University, Hyderabad has specializations such as B.Tech specializations in Mechanical Engineering, Manufacturing Engineering, Electronics & Communication Engineering, Civil Engineering, Electrical Engineering, Computer Science Engineering, Metallurgical Engineering, Chemical Engineering, M.E./M.Tech specializations in Mechatronics Engineering, Structural Engineering, Civil Engineering, Transportation Engineering, Power Engineering, Electrical Engineering, Mechanical Engineering, Industrial Engineering, Electronics & Communication Engineering, Computer Science Engineering, Metallurgical Engineering, M.Sc. specializations in Physics, Pharmaceutical, Chemistry, Mathematics.

The admission process at Anurag University is based on an entrance exam as per the course requirement. Candidates looking for course admission must meet the eligibility criteria set by the college. Aspirants must pass Class 12 for UG, graduation for PG and Master's Degree for the PhD courses.

Some of the prominent companies that visited the MU Hyderabad campus over the past few years are listed below: 

Mahindra University Placements: Top Recruiters
Schlumberger Asia Services Ltd.	Telstra
ZS Associates	Amazon
IBM	TechnipFMC
Capgemini	Cognizant
Cisco	IBM

For admission to BTech and M.Tech courses, Gokaraju Rangaraju Institute of Engineering and Technology accepts entrance exam scores. The list of course-wise entrance exams accepted at Gokaraju Rangaraju Institute of Engineering and Technology is given below: 

Courses	Selection Criteria
BTech	TS EAMCET
MTech	GATE, TS PGECET

Admissions to VNR Vignana Jyothi Institute of Engineering and Technology courses are entrance-based, but yes, you can get direct admission to VNR Vignana Jyothi Institute of Engineering and Technology through the management quota. VNR Application for admission to its courses is available on its official website. Candidates willing to apply can send the duly filled form through email.

As per Shiksha verified reviews, Vardhaman College of Engineering has an impressive review rating of 3.78 by 413 students.

Admission into M.Tech can be done using TS PGECET/GATE scores. After the declaration of results, apply to counselling and make Vignan’s Foundation for Science, Technology and Research, Hyderabad as a preference. The applicants are admitted in light of their scores, seats and eligibility. Verification of documents and submission of fees is necessary in order to give a final selection.

The fees range for courses offerred by the Vidya Jyothi Institute of Technology is around INR 103600 - INR 460000.

Nalla Malla Reddy Engineering College has been rated 3.3 on placements on the basis of 208 reviews done by students.

BITS Hyderabad offers good placements annually for its various courses like BTech, M.Tech and BPharma, etc. A total of 109 recruiters participated in the placement process 2023 and placed students of various courses like BTech, MTech, and BPharma, etc. The key highlights of BITS Hyderabad placements for the Class of 2023 are presented below:

Particulars	Placement Statistics (2023)
Total recruiters	109
Highest package	INR 60.75 LPA
Average package	INR 30.37 LPA
Median package	INR 30 LPA

 

St. Mary's Group of Institutions has been rated 4.2 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

According to Shiksha verified reviews, for the faculty Methodist College of Engineering & Technology have rating of 4.18. It represents that Institute has good, qualified and experienced faculty members.

The important subjects might vary slightly depending on the university as every university follow a certain set of guidelines when it comes to their coursework, but common topics covered in the course usually remain almost the same that include
]Advanced Algorithms and Data Structures
]Software Engineering Principles
]AI and ML
Computer Networks and Distributed Systems
Database Management Systems
Computer Architecture and Organization

You also get to choose from a variety of elective subjects in the second year as per your interests and career goals.

Know more about -

MTech Courses

Sreenidhi Institute of Science and Technology offers admission based on entrance exam scores of the candidates. The institute considers TS EAMCET scores for BTech. Admission to MBA and M.Tech courses is based on TS ICET and GATE/ TS PGECET scores. Out of the total, 70% seats are offered to aspirants under the Covener Quota. Remaining 30% seats are offered under the Management Quota. 

GITAM School of Technology Hyderabad has been providing successful placements over the years. The students are given excellent placement support every year placing them in top companies. Check out the table below to know the key highlights of the GITAM School of Technology Hyderabad Placement 2024:

 

NOTE: The above data is obtained from the NIRF report 2025

 University College of Engineering Osmania University offers MTech at full-time and part-time mode. The:

Courses	Full-Time MTech Fee
ME in Computer Science and Engineering	35,000
ME in Electrical Engineering (Power Systems)	15,000
ME in Electrical Engineering (Industrial Drives and Control)	15,000
ME in Civil Engineering (Transportation Engineering)	15,000
ME3 in Civil Engineering (Structural Engineering)	15,000
ME in Mechanical Engineering (Turbo Machinery)	15,000
ME7 in Mechanical Engineering (Automation and Robotics)	15,000
ME in Mechanical Engineering (Production Engineering)	15,000
ME8 in Electronics and Communication Engineering (Systems and Signal Processing)	15,000
ME in Electronics and Communication Engineering (Digital Systems)	15,000

*This information is sourced from the official website/ sanctioning body and is subject to change.

 

Yes, students can get direct admisison for some course like BSc, MA, BA, BCom and others. The university accepts admission based on both merit and entrance exams. The university accepts national entrance exams like JEE Main, TS EAMCET, GATE, TS PGECET, MAT, XAT, and others. It is necessary for students to qualify the eligibility criteria. 

Yes, Mahaveer Institute of Science and Technology admissions are entrance-based for all the courses. There are four-programme available at UG, PG and Diploma level which are BTech, MTech, MBA and Polytechnic. Below are entrance exam accepted for MIST, Hyderabad courses:

• BTech : TS EAMCET
• MTech: TS PGECET
• MBA: TSICET
• Polytechnic: TS POLYCET

 

Marri Laxman Reddy Institute of Technology and Management offers three courses at UG and PG levels. The below-mentioned course fee is as per the official website/sanctioning body. It is subject to changes and hence, is indicative. The total tuition fee for all the courses is given below:

Courses	Tuition Fees
BTech	INR 3.2 Lacs - INR 4 lakh
MTech	INR 1.2 lakh
MBA	INR 60,000

 

The seats availability for offered courses at Nawab Shah Alam Khan College of Engineering and Technology (NSAKCET) goes up to 972. Courses offerred by Nawab Shah Alam Khan College of Engineering and Technology (NSAKCET) are approved by eminent Government bodies such as AICTE.

As per Shiksha verified reviews, Central Institute of Tool Design has an impressive review rating of 3.7 by 29 students.

The important subjects might vary depending on the university as every university follow a certain set of guidelines when it comes to their coursework, but common topics covered in the M.Tech Civil Engineering course usually remain almost the same that include:
• Structural Dynamics
• Advanced Concrete Technology
• Finite Element Analysis
• Rock Mechanics and Earth Pressure
• Soil Dynamics and Machine Foundations
You also get to choose from a variety of elective subjects as per your interests and career goals. Further, you can also pursue a major in a particular branch of Civil Engineering like Structural Engineering, Hydraulics and Water Resources Engineering, Geotechnical Engineering, etc.

know more about -

Civil Engineering Subjects