How is the quality of food in the hostel mess of National Institute of Foundry and Forge Technology?

The quality of food in the hostel mess at the National Institute of Foundry and Forge Technology (NIAMT) in Ranchi is average or below average. Meal times Breakfast 7–8:30 AM Lunch 12:30–2:30 PM Snacks 5–6 PM Dinner 7:30–9 PM

Is minimum rank of 50000 sufficient for admission in CE at National Institute of Foundry and Forge Technology under General AI?

Yes, to get into National Institute of Foundry and Forge Technology, 50000 is satisfactory rank. With this rank, candidates can fetch any course including BTech in Computer Engineering. Moreover, considering the NIFFT cutoff 2025 the General AI category cutoffs for BTech for the same institute stood between 52112 and 79054. Similary, for the OBC AI category candidates, the needed rank ranged between 18159 and 31249. The rank is more than sufficient to get admission with General AI quota, However, not for OBC AI quota, as the rank is bit too low to get you any course under OBC quota.

Does National Institute of Foundry and Forge Technology provide good placement facilities?

National Institute of Foundry and Forge Technology has been rated 4.3 on placements on the basis of 98 reviews done by students.

How can candidates join National Institute of Foundry and Forge Technology?

For aspiring candidates wishing to NIFFT the following requirements apply. In case of B.Tech admissions, pass in 10+2 in Science and clear JEE Main, they get admitted through JoSAA counseling. Compared to B.Tech admissions, M.Tech admissions necessitate a bachelor’s degree in a relevant field of study as well as a valid GATE score which is offered through CCMT counseling. To entice the Advanced Diploma Courses, candidate must possess a Diploma in engineering and should have obtained 50% marks or above Admission is done through a written examination For the suitably qualified Ph.D. candidates, one must have a relevant master’s degree

What are the required documents during the B.E. / B.Tech application process at National Institute of Foundry and Forge Technology?

The list of required documents during the application and admission process: 1. JEE Main Admit Card 2. JEE Main Rank Card 3. Class 10 Mark Sheet and Certificate 4. Photo ID Proof

National Institute of Advanced Manufacturing Technology

6 Videos,

7 Photos

National Institute of Advanced Manufacturing Technology: Courses, Fees, Admission 2026, Placements, Reviews

Ranchi

4.2 /5

(140 Reviews)

32 Student Q&A

Public/Government Institute
Estd. 1966

Last updated on 8 Oct '26

National Institute of Advanced Manufacturing Technology
What's new?

For All Courses

Change

National Institute of Advanced Manufacturing Technology admissions 2026 are open. Here are some additional updates regarding the National Institute of Foundry and Forge Technology:

The GATE CCMT 2026 Counselling process for admission to the ME/MTech has concluded.
The JOSAA 2026 counselling process has concluded for admission to the BE/BTech course with the release of Round 5 seat allotment results.
The CSAB Counselling 2026 special round 2 has now concluded.
GATE 2027 City allotment notification for admission to the ME/MTech course will be announced on Jan 4, 2027. The exam will be held from Feb 6 to Feb 7, 2027; Feb 13 to Feb 14, 2027; and Feb 20 to Feb 21, 2027.
JEE Main 2027 session 1 online application form is now available on the official website for admission to the BTech, BArch and BPlan courses till Nov 22, 2026. The exam will be held on Jan 22,2027 to Jan 24,2027 and Jan 28, 2027 to Jan 30, 2027 respectively.

National Institute of Advanced Manufacturing Technology Overview

Table of contents

National Institute of Foundry and Forge Technology Highlights 2026
National Institute of Foundry and Forge Technology Courses & Fees 2026
National Institute of Advanced Manufacturing Technology Admission & Application Process 2026
National Institute of Advanced Manufacturing Technology Student Reviews
National Institute of Foundry and Forge Technology Cutoff 2026
+ 8 more items

National Institute of Foundry and Forge Technology Highlights 2026

National Institute of Advanced Manufacturing Technology is a public institute located in Ranchi, Jharkhand. National Institute of Foundry and Forge Technology highlights with respect to fee, placement, ranking, selection process and cutoff are presented below:

Fees: For B.E. / B.Tech, the total tuition fee is 1.42 Lakhs for Manufacturing Engineering and 2 Lakhs for Metallurgical Engineering.
Placement: Average package offered during placements 2023 was 9.25 Lakhs for B.E. / B.Tech. This is the latest placement information released by the institute. Any new information will be updated once out.
Ranking: The institute is ranked 262 under Engineering category by NIRF for 2025.
Cutoff: National Institute of Foundry and Forge Technology cutoff round 7 2026 for B.E. / B.Tech has been released for JEE Main. For GN category, the cutoff ranged from 85554 (B.Tech. in Computer Engineering) to 138997 (B.Tech. in Production and Industrial Engineering).
Popular courses: National Institute of Foundry and Forge Technology popular course is B.E. / B.Tech.
Accepted exams: The accepted exams for B.E. / B.Tech are JEE Main, and JEECE.

Commonly asked questions
On Highlights

Q: What was the highest package offered at National Institute of Advanced Manufacturing Technology placements?

As per the latest report, the highest package offered to BTech (MME and ME) batch 2024 during National Institute of Advanced Manufacturing Technology placements 2024 stood at INR 7.4 LPA. The course-wise average package offered during NIAMT placements between 2023 and 2024 are tabulated below:

Course

the highest Package (2023)

the highest Package (2024)

BTech

INR 14 LPA

INR 15 LPA (ME and MME, international)

INR 13.95 LPA (ME and MME, domestic)

MTech

INR 4.8 LPA

UG Diploma

INR 4.8 LPA

Q: What is B.E. / B.Tech fees in National Institute of Foundry and Forge Technology?

Fees in INR for B.E. (Bachelor of Engineering) / B.Tech (Bachelor of Technology) programs in this National Institute of Foundry and Forge Technology college is as below.

Tution Fee - INR 1.4 Lacs per year
Institute deposit - INR 3,000 (one time)
Library deposit - INR 2,000 (one time)
Other fees - INR 5,850 (exam fee, lab fee etc.) per year

Q: How much is the median salary of M.E./M.Tech course by National Institute of Foundry and Forge Technology?

Median salary of M.E./M.Tech course is INR 425,000 as per the reports/data available.

Q: Can I get admission to National Institute of Foundry and Forge Technology B.E. / B.Tech course without JEE Main?

To get admission to B.E. / B.Tech course without JEE Main is possible by giving alternate exams. You should give JEECE or DASA Ug to get admitted in this college. The scores for these exams can be considered. You can check the cut off for these exams on college website.

National Institute of Foundry and Forge Technology Courses & Fees 2026

Courses in National Institute of Foundry and Forge Technology are offered at the UG and PG levels. The course offered in the field of Engineering. Popular courses offered by National Institute of Advanced Manufacturing Technology are, B.E. / B.Tech, M.E./M.Tech and UG Diploma.

As a popular course of National Institute of Foundry and Forge Technology, B.E. / B.Tech is offered across 5 specialisations, which include CSE, Mechanical Engineering, Manufacturing Engineering and Metallurgical Engineering.

Given below are the details of National Institute of Advanced Manufacturing Technology courses and their fees:

Course	Total Tuition Fees	Total Fees
B.E. / B.Tech	INR 1.42 Lakh - 2 Lakh	INR 2.54 Lakh - INR 3.44 Lakh
M.E./M.Tech	INR 69.3 K - 3.4 Lakh	INR 69.3 K - INR 3.42 Lakh
UG Diploma	INR 15 K	INR 54.56 K

Note: The fees mentioned above are subject to change.

Beyond tuition fees, there are a few other components, which are borne by the students of National Institute of Foundry and Forge Technology. Check below other fee components of National Institute of Advanced Manufacturing Technology:

Course	Hostel Fees	One-time Fees
B.E. / B.Tech	INR 1.12 Lakh - 1.33 Lakh	INR 11 K
M.E./M.Tech	-/-	INR 2 K
UG Diploma	INR 36.56 K	INR 3 K

B.E. / B.Tech

5 Courses

4.1(123)4 years201-300 NIRF

Exams Accepted

Total Tuition Fees

₹1.42 L - 2 L

Get Fee Details

Median Salary

₹10 LPA

UG Diploma

2 Courses

4.5(8)18 months

Exams Accepted

– / –

Total Tuition Fees

₹15 K

Get Fee Details

Placement Rating

4.5

View All 3 Courses

National Institute of Advanced Manufacturing Technology Admission & Application Process 2026

National Institute of Advanced Manufacturing Technology admissions 2026 are entrance-based. JEE Mains are accepted for the BTech admission and GATE is accepted for the MTech admission. Given below is the selection process for various programmes:

NIAMT Application Process 2026

The National Institute of Advanced Manufacturing Technology application process 2026 is online. For BTech admissions, students have to apply for JEE Mains on the NTA website. Below given is the application process:

Go to the NIAMT Official Website.
Download the application form.
Submit the completed form along with required documents.
Pay the fees of INR 500 for Gen/OBC/EWS, INR 250 for SC/ST/PwD.

NIAMT Selection Criteria 2026

Admission to all disciplines will be made in the autumn semester through JEE (Main), the counseling for which is done by JoSAA. Selected candidates are invited to appear for the document verification and counselling process. Finally, selected candidates must pay the National Institute of Advanced Manufacturing Technology fees.

NIAMT Documents Required 2026

Class 10 marksheet
Class 12 marksheet
Provisional seat allotment letter
Score Card of JEE Main/GATE
Character Certificate
Migration Certificate
Photo identity card
Passport size photograph
Category Certificates for candidates who belong to reserved categories

B.E. / B.Tech Admissions 2027

5 Courses4 years

Eligibility

10+2 with 75% aggregate
Accepting Exams: JEECE, JEE Main

Important dates

Dates	Events
24 Oct '26 - 22 Nov '26	JEE Main 2027 Registration Session 1Ongoing
23 Nov '26 - 26 Nov '26	JEE Main 2027 Registration Session 1 with Late Fee
20 Jan '27 - 28 Jan '27	JEE Main 2027 Exam Date Session 1

M.E./M.Tech Admissions 2027

5 Courses2 years

Eligibility

Undergraduate Degree with 60% aggregate
Accepting Exams: GATE

Important dates

Dates	Events
Jan '27	GATE 2027 Admit CardTentative
6 Feb '27	GATE 2027 Exam- Day 1
7 Feb '27	GATE 2027 Exam - Day 2

Admission Details for all courses

National Institute of Foundry and Forge Technology Cutoff 2026

National Institute of Foundry and Forge Technology cutoff 2026 has been released for B.E. / B.Tech and M.E./M.Tech courses. JEE Main Round 7 cutoff 2026 for B.E. / B.Tech ranged from 85554 (B.Tech. in Computer Engineering) - 138997 (B.Tech. in Production and Industrial Engineering) for general category.

For M.E./M.Tech, GATE Round 1 cutoff 2026 is 440 under general category. More details around National Institute of Foundry and Forge Technology cutoff are as follows:

National Institute of Foundry and Forge Technology Rankings 2026

According to NIRF ranking 2025, National Institute of Foundry and Forge Technology is ranked #262 in the 'Engineering' category. NIRF has not released the recent rankings yet. The information here will be updated once they release the new rankings. National Institute of Foundry and Forge Technology ranking 2025 details are tabulated below:

National Institute of Advanced Manufacturing Technology Placements 2025

National Institute of Foundry and Forge Technology placements 2026 will be updated here once out. The college is visited by top companies for placements such as JSW Group, Sona Comstar, LUMIVO, Reliance, and others. The below-mentioned are the National Institute of Advanced Manufacturing Technology placement statistics for 2025:

Particulars	BTech Statistics 2025
Highest package	INR 13.95 LPA
Average package	INR 7.10 LPA

National Institute of Advanced Manufacturing Technology Popular Courses

View all

B.E. / B.Tech

UG Diploma

M.E./M.Tech

B.Tech. in Metallurgy and Material Engineering icon

4 years

Tuition Fees

₹2 LGet Fee Details

Exams Accepted

B.Tech. in Manufacturing Engineering icon

4 years

Tuition Fees

₹1.42 L

Exams Accepted

B.Tech. in Computer Engineering icon

4 years

Tuition Fees

-/-

Exams Accepted

JEE Main

B.Tech. in Mechanical Engineering icon

4 years

Tuition Fees

₹2 LGet Fee Details

Exams Accepted

B.Tech. in Production and Industrial Engineering icon

4 years

Tuition Fees

-/-

Exams Accepted

JEE Main

Students like you also explore these online courses

National Institute of Advanced Manufacturing Technology
FAQs

Q: How can I get into National Institute of Foundry and Forge Technology for UG/PG courses? Am I eligible for admission?

National Institute of Foundry and Forge Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
M.E./M.Tech	Candidate must have passed Bachelor's degree in relevant discipline with minimum of 60% marks for GEN/GEN-EWS/OBC or at least 6.5 CGPA (on a 10- point scale) and 55% marks in case of SC/ST/PwD candidates or 6.0 CGPA (on a 10-point scale) from a recognised university/Institute. Final year appearning students may also apply on provisional basis. Candidate must have a valid GATE Score of the year 2020 / 2021 / 2022. Candidate who has passed from any of the professional societies such as The Institution of Engineers (India) (IE), The Institution of Civil Engineers (ICE), The Institution of Electronics and Telecommunication Engineers (IETE), The Aeronautical Society of India (AeSI), The Indian Institute of Chemical Engineers, including Polymer and Environmental Group (IIChemE), The Indian Institute of Metals (IIM), The Indian Institute of Industrial Engineers (IIE), etc. ) and has enrolled with these institutions with permanent recognition up to May 31, 2013 can also apply.
UG Diploma	Candidate must have passed Diploma in automobile/ metallurgical/ mechanical/ production/ manufacturing engineering/ B.Sc. degree with physics, chemistry and mathematics with 50% marks (45% in case of SC/ST)
B.E. / B.Tech	Candidate with below mentioned eligibility are also eligible: Final examination of the 2-year course of the Joint Services Wing of the NDA. SSC Examination conducted by the NIOS with a minimum of 5 subjects. A Diploma recognised by AICTE or a State board of technical education of at least 3 year duration. General Certificate Education (GCE) examination (London/Cambridge/Sri Lanka) at the Advanced (A) level.

Q: Is National Institute of Foundry and Forge Technology a good college/Institute?

National Institute of Foundry and Forge Technology is a well-known institution for M.E./M.Tech, UG Diploma, B.E. / B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, National Institute of Foundry and Forge Technology has a rating of 4.13 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.61 on Campus Life, 4.31 on Placements, 3.97 on Faculty and 4.2 on Infrastructure.

Q: Why is B.E. / B.Tech the best choice at National Institute of Foundry and Forge Technology?

B.E. / B.Tech is the best choice at National Institute of Foundry and Forge Technology because of its high placement rate, good infrastructre and faculty. Almost 98% of the students get placed every year. The highest package offered till now is INR 16 lakh per annum, and the lowest is INR 4 LPA. All the teachers are very good. They are very helpful in nature. They all are very knowledgable.

Q: Is admission open in National Institute of Foundry and Forge Technology?

NIFFT, National Institute of Foundry and Forge Technology which has completed its admission process for 2024 session for all those students who want to take admission in this institute up to November 03, 2024. The institute provides B.Tech and M.Tech degrees, where students seek admission normally sitting National level tests like JEE Main and GATE respectively. Aspirants need to check the official website of NIAMT for detailed information on 2025 admission process such as date and requirement criteria etc.

Q: How much in-campus salary is offered at National Institute of Foundry and Forge Technology to B.E. / B.Tech students?

National Institute of Foundry and Forge Technology offers in-campus placement salaries in the range of INR 5.05 LPA to B.E. / B.Tech students.

Q: What specializations do National Institute of Foundry and Forge Technology offer in their courses?

National Institute of Foundry and Forge Technology is a good institution for M.E./M.Tech, UG Diploma, B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at National Institute of Foundry and Forge Technology are Environmental Engineering, Metallurgical Engineering, Mechanical Engineering, Production Engineering, Computer Science Engineering.

Q: What is the intake for offered courses at National Institute of Foundry and Forge Technology?

The seats availability for offered courses at National Institute of Foundry and Forge Technology goes up to 614. Courses offerred by National Institute of Foundry and Forge Technology are approved by eminent Government bodies such as AICTE.

Q: Does National Institute of Foundry and Forge Technology has good and experienced faculty?

National Institute of Foundry and Forge Technology has been rated 4 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Q: How is the faculty at National Institute of Foundry and Forge Technology?

The faculty at the National Institute of Foundry and Forge Technology (NIAMT) in Ranchi, India is known for being well-qualified, helpful, and knowledgeable:

Qualifications: More than 90% of the faculty members have a Ph.D. degree, and many have industrial experience.
Teaching quality: Some say the teaching quality is very good.
Environment: The faculty, students, and course structure are said to create an ideal environment for developing future leaders.

NIAMT is a Deemed to be University under the Ministry of Education (MoE), Government of India. It offers undergraduate and graduate programs in areas such as manufacturing engineering, materials and metallurgical engineering, mechanical engineering, and electronics and computer engineering.

Q: How is the faculty at National Institute of Foundry and Forge Technology?

Yes, in this college teachers are very helpful and highly qualified from reputed college like IITs.

Faculty is good, all are qualified and have done PhD from authorised institutions like IIT and foreign institutes. Difficulty faced in the semester exam due to an incomplete syllabus, but it depends on students who have done their HW and complete their syllabus through a reference book which is present in the library. Faculty are very supportive. Curriculum is a bit old. Faculty are graduates from well-known institutes around India. There are 4 branches, in which computer engineering, production and industrial engineering are the new ones.

Content authored by: