Colleges offering Embedded Systems & VLSI Courses in Telangana

Yes, the university gives various financial help to candidates who are good at studies and suffer financial problems due to family low income. Malla Reddy University offers Merit Scholarships for Meritorious Students in all courses.

The median salary granted to students upon a successful placement from the Institute of Aeronautical Engineering is INR 4.5 LPA, indicating the institution's commitment to fostering prosperous career beginnings, with graduates receiving a commendable financial remuneration.

For admission to MLR Institute of Technology for M.Tech, it is mandatory for candidate to have a valid GATE scores. The criterion for eligibility are a B.Tech degree or pass in an equivalent qualification in any of the relevant fields with not less than 50% of the aggregate marks. Also there can be some seats for those who can pass the entrance examination conducted by the Institute for candidates received certain result. Thus, it is recommended first to visit its official website to be informed about admission details and M.Tech program and other specific requirements and dates that might be changed every year.

Mahindra University offers entrance- based admission into different UG, PG and Doctoral level courses. Candidates can check below the exams accepted by Mahindra University: 

• BTech- JEE Main/SAT/ACT 
• MTech- GATE 
• MBA- CAT/GMAT/GRE/MUMET
• BDes- UCEED/CEED
• Law- CLAT/MULET/LSAT

TS EAMCET Counselling fee for OBC category candidates is INR 1200 and for Scheduled Caste (SC)/ Scheduled Tribe (ST) Category is INR 600. CMR College of Engineering and Technology admission to the BTech course is done through TS EAMCET exam followed by TS EAMCET Counselling which is to be conducted in three phases namely, Phase 1, Phase 2 and Final Phase. Spot Round will also be conducted for Private Unaided Engineering Colleges. Candidates eligible to appear for the counselling process can refer to the table given below to check out the categories-wise TS EAMCET counselling fees: 

Categories	Counselling Fee (in INR)
Other Backward Classes (OBC)	1200
Scheduled Caste (SC)/ Scheduled Tribe (ST) Category	600

CDAC - Centre for Development of Advanced Computing is a reputed institute for Certificate, PG Diploma, UG Diploma, M.E./M.Tech, MCA, MBA/PGDM. Students can opt these programs to pursue their career in IT & Software, Science, Engineering, Business & Management Studies. Institute has trained & experienced faculty who deliver these programs. CDAC - Centre for Development of Advanced Computing has a review rating of 4.1 on the basis of reviews by students. In addition to this, it has been rated 4.1 on campuslife, 4 on placements, 4.3 on faculty and 4 on Infrastructure.

To secure admission at VNR VJIET courses, candidates need appear for the respective entrance test as per the desired course.

The year-wise and specialisation-wise TS EAMCET rank required for admission to VNR VJIET BTech is mentioned below:

TS EAMCET Last Round Closing Rank (General-All India)
Course	2021	2022	2023
B.Tech. in Mechanical Engineering	52781	– / –	10969
B.Tech. in Automobile Engineering	29215	12288	13519
B.Tech. in Computer Science and Engineering	6388	1175	858
B.Tech. in Electronics and Communication Engineering	20556	4875	3636
B.Tech. in civil Engineering	41152	– / –	18338
B.Tech. in Electrical and Electronics Engineering	15521	13267	9164
B.Tech. in Electronics and Instrumentation Engineering	25689	16466	11033
B.Tech. in Information Technology	71014	2954	2606
B.Tech. in Computer Science and Business System	3101	2942	2052
B.Tech. in Computer Science and Engineering (Artificial Intelligence and Machine Learning)	1887	1792	1819
B.Tech. in Computer Science and Engineering (Data Science)	2115	2258	2048
B.Tech. in Computer Science and Engineering (IOT)	2963	2943	2462
B.Tech. in Computer Science and Engineering (Cyber Security)	2482	1076	2200
B.Tech. in Artificial Intelligence and Data Science	– / –	2108	2072

Guru Nanak Institutions Technical Campus accepts admission to various courses based on the entrance exam scores. The basic eligibility criteria for the PG courses is a bachelor's with 50% aggregate. Students with 60% in Class 12 can only get admission to undergraduate courses when they clear any of the accepted entrance exams. 

Admission process for various UG and PG courses offered by JNTUH College of Engineering differs depending on the stream. Admission to a majority of courses offered by JNTUH College of Engineering is entrance-based. Apart from JEE Main and GATE candidates can also appear for TS EAMCET, CPGET,  and TSICET for admission to UG and PG courses offered by JNTUH College of Engineering. 

Course	Eligibility
BTech	10+2 with 45% + TS EAMCET
MTech	Graduation with 50% + TS PGECET
BTech + MTech	10+2 with 45% + TS EAMCET
BTech + MBA	10+2 with 45% + TS EAMCET
MCA	Graduation with 50% + TSICET

BV Raju Institute of Technology has courses such as B.Tech, M.E./M.Tech, MBA/PGDM to offer. These courses are in the stream of Engineering, Business & Management Studies. BV Raju Institute of Technology has specializations such as B.Tech specializations in Computer Science Engineering, Electrical Engineering, Information Technology, Civil Engineering, Electronics & Communication Engineering, Mechanical Engineering, Chemical Engineering, Pharmaceutical engineering, Artificial Intelligence & Machine Learning, Biomedical Engineering, M.E./M.Tech specializations in VLSI Design, Electrical Engineering, Computer Science Engineering, Chemical Engineering.

CMR Technical Campus is a well-known institution for M.E./M.Tech, B.E. / B.Tech, MBA/PGDM courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, CMR Technical Campus has a rating of 4.24 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.27 on Campus Life, 4.16 on Placements, 4.24 on Faculty and 4.36 on Infrastructure.

The fee bracket for programs offerred by the Marri Laxman Reddy Institute of Technology and Management (MLRITM) is approximately INR 60000 - INR 400000.

Stanley College of Engineering and Technology for Women is a well-known institution for M.E./M.Tech, B.E. / B.Tech, MBA/PGDM courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Stanley College of Engineering and Technology for Women has a rating of 4.08 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.2 on Campus Life, 4.29 on Placements, 4.08 on Faculty and 3.99 on Infrastructure.

Yes, admissions at Siddhartha Institute of Engineering and Technology are possible after Class 12 as there are UG courses available for students in this college. At the UG level, the college offers BTech and various other courses to students. The following is the BTech specilaisations and the seat intake:

Name of the Course	Intake
Computer Science and Engineering	180
CSE – Artificial Intelligence And Machine Learning	60
CSE – Data Science	60
Electronics and Communication Engineering	120
Electrical and Electronics Engineering	120
Civil Engineering	120
Mechanical Engineering	60

Vector Institute provides programmes including Certificate in streams such as IT & Software, and are excellent for students to build their careers. The institute has specializations in C / C+, Embedded Systems & VLSI, Linux, iOS, Android.

The seats availability for offered courses at Central Institute of Tool Design goes up to 539. Courses offerred by Central Institute of Tool Design are approved by eminent Government bodies such as AICTE.

International Academy for Certification and Training (IACT) has below criteria for taking admissions to it's various courses:

Courses	Eligibility
UG Diploma	Candidate must have passed 10+2 from a recognised board.
Certificate	Candidate must have passed 10+2 from a recognized board.

Many top international companies having presence in India hire electrical engineers and offer them handsome salary packages. Some of the top recruiters are given here:

• Larson & Toubro
• Tata Electric Companies
• Sterling
• Schneider Electric
• Crompton Greaves
• Siemens
• Exide Industries Limited
• Mellcon Engineers

St.Mary's Engineering College has been rated 3.8 on Infrastructure parameter. St.Mary's Engineering College has also been rated 4.2 for Campuslife.

Government Polytechnic College, Nizamabad have rating of 4.5 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Nano Scientific Research Centre provides programmes including Certificate in streams such as IT & Software, and are excellent for students to build their careers. The institute has specializations in Embedded Systems & VLSI, PHP, .NET, Java, C / C++, Pro E.

ISM UNIV (Hyderabad) offers placement support to its students. Notable organizations that visit the institute for recruitment include Agroa Infrastructure Pvtltd, Careerty Informatics Pvt Ltd, Green Ripples Pvt Ltd, Healthsignz Pvt Limited, Linpack Technologies Pvt Ltd, Linuxbean Pvt Solution, Lokesh A R, Mk Fasteners Pvt Ltd, Rd Constro Tech, Shree Krishna Infrastructure, Softek Computer, Yashshvi Rasayan Pvtltd Dahej, Zook Studios, Samsung R And D Institute India Noida, Terminal Contacts, Deloitte And Touche Assurancr Enterprise Risk And Services India Pvt Ltd, Global Green Agri Nova, Kraft Surgicals Pvt Ltd, Kumar Agriculture Store, Mojhi, Eprofess, Tse.