6 Videos,22 Photos
Diploma in Tool Engineering and Digital Manufacturing
3.6 /5- Estd. 1959
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Overview
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
At the After 10th level, NTTF - Nettur Technical Training Foundation offers 3 years Diploma in Tool Engineering and Digital Manufacturing course with a duration of 3 years. Student must pay INR 20,500 as one-time admission fee to confirm their seats. Along with that, hostel fee of INR 1,84,000 is to be paid by students who seek hostel facilities at the campus. Moreover, the total tuition fee for Diploma in Tool Engineering and Digital Manufacturing admission at NTTF - Nettur Technical Training Foundation is INR 27,00,000, which is valid for the entire duration of the course. Students can also check the other NTTF - Nettur Technical Training Foundation After 10th Diploma courses.
Total Tuition Fees | ₹27.00 Lakh Get Fees details |
Duration | 3 years |
Course Level | After 10th Diploma |
Mode of Course | Full Time |
Official Website | Go to Website  |
Diploma in Tool Engineering and Digital Manufacturing
Table of content
- Overview
- Fees
- Highlights
- Curriculum
- Student Reviews
- + 3 more items
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Fees
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
The total tuition fee for 3 years Diploma in Tool Engineering and Digital Manufacturing course is INR 27,00,000. Apart from this, the NTTF - Nettur Technical Training Foundation fees for Diploma in Tool Engineering and Digital Manufacturing include other components such as the security deposit, registration fee and more. After final selection, the fee payment needs to be done for seat confirmation. The fee breakup for the course is showcased in the following table:
| Fee components | Amount (3 years) |
|---|---|
₹ 27.00 Lakh | |
The mentioned fees is minimum hostel fees and the maximum hostel fee is Rs. 250000. Meal plan is included in the mentioned fees. The Fees might include components other than hostel fees. Hostel fee is The mentioned fees is minimum hostel fees and the maximum hostel fee is Rs. 250000. Meal plan is included in the mentioned fees. The Fees might include components other than hostel fees. Hostel fee is calculated on the basis of 1st semester. Actual amount may vary. | ₹ 1.84 Lakh |
One-time payment includes caution deposit, Tool Kit and Uniform charge | ₹ 20,500 |
₹ 29.05 Lakh |
These are based on information available on various sources. Latest values may differ.Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Highlights
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
- The program is designed to last for 3 years, but students have the option to take a break after completing the 1st or 2nd year.
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Curriculum
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
The updated NTTF - Nettur Technical Training Foundation Diploma in Tool Engineering and Digital Manufacturing curriculum can be downloaded from the link provided below. The curriculum includes semester-wise course structure, electives and course details. Students willing to get admission to this NTTF - Nettur Technical Training Foundation Diploma in Tool Engineering and Digital Manufacturing course can check the curriculum below:
C
Charan 
Diploma in Tool Engineering and Digital Manufacturing - Batch of 2023
Offered by NTTF - Nettur Technical Training Foundation
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
The college provides placement for any NTTF student with good grades and knowledge.
Placements: The highest package is INR 7.8 lacs per annum.
The average package is INR 3.8 lacs per annum. 90% of the interview questions will be course-related because my course is tool and die making. Companies see skills, confidence, and knowledge in trainees.
Infrastructure: My college is very nice because it has five courses: computer engineering, mechatronics, tool and die, electronics, and my class room has full facilities such as AC rooms, medical kits, smart classrooms, and good teachers to learn about the knowledge. My canteen is also very nice because it is clean and hygienic.
Faculty: The Nttf college teachers are very helpful and very nice. The semester exam is averagely difficult, but anyone who is not studying at that time is very likely to face problems. I fully comprehend my work, and it is a physically demanding job because of the tool and die course. I recommend the tool and die course to anyone interested in starting a business.
Other: I chose for that course to gain full knowledge of any mechanical work for a better future after that course.
Reviewed on 4 Apr 2023Read More
A
Anonymous
Diploma in Tool Engineering and Digital Manufacturing - Batch of 2022
Offered by NTTF - Nettur Technical Training Foundation
2.8
2Placements3Infrastructure4Faculty2Crowd & Campus Life3Value for Money
I am not satisfied with its placements.
Placements: Placements are good. The salary packages are also decent. Students are getting more work in this course. I would not recommend students to join this college because it is not related to jobs. Few companies visit our college for recruitment. The companies fire employees within two months.
Infrastructure: The infrastructure is very good. Classrooms are air-conditioned. The laboratory has a slip gauge, SNAP gauge, and CMM only for emission purposes. There are 6 milling machines but 3 machines are under maintenance. The food served in the canteen is better. Hostels are also average and sports are also not good.
Faculty: This course curriculum is practical-based. Semester exams are moderate. The pass marks for first-year students are 35 and 40 marks for the second year. The pass marks for third-year students are 45. Project work is important for final-year students because it will help to pass easily.
Other: I chose this course because of my interest in it. Theory-based knowledge is provided in this course.
Reviewed on 23 Dec 2022Read More
(1) 1 person found this helpfulS
Shaheershah PH
Diploma in Tool Engineering and Digital Manufacturing - Batch of 2023
Offered by NTTF - Nettur Technical Training Foundation
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
100% of placements makes this college is very special.
Placements: 100% of placements are provided for students. Ford, TVS, Timex, etc., are the top recruiting companies. 100% of students got internships. Tool and die maker, designer in tool & die making, etc., roles are offered. Big companies conduct interviews and select the trainees.
The selection is done based on the student's skills, knowledge and attitude.
Infrastructure: Wi-Fi, classrooms, library, playground, workshop, etc., are available. Sports and games are available. Prices are reasonable in the canteen. Mess committee is very helpful for checking food quality regularly. All the departments have in-charges.
Faculty: The teachers are very helpful, qualified and knowledgeable. They provide special training to make the students industry-ready. 35-40% is the minimum pass percentage. This course is very relevant. They concentrate more on practical than theory subjects.
Other: This is one of the rarest courses. Events, fests, campus crowd, connectivity, campus surroundings, scholarships, extracurricular activities, etc., are good.
Reviewed on 14 Jun 2022Read More
Photos
S
Soumojeet Sarkar
Diploma in Tool Engineering and Digital Manufacturing - Batch of 2022
Offered by NTTF - Nettur Technical Training Foundation
4.4
5Placements4Infrastructure5Faculty5Crowd & Campus Life3Value for Money
The college makes the trainees industry-ready.
Placements: In my course, the batch strength is 50. 100% placements are achieved. The highest package offered was 4 LPA, and the lowest package was 2.5 LPA. The top recruiting companies are Makino, Eicher, Volvo and Suzuki Motors. Our college doesn't provide internships. The top role offered was a junior engineer.
Infrastructure: The infrastructure provides a great experience. Our college has multiple labs which can accommodate more than 70 people at a time. Multiple machines are available so no one is left behind. The hostel provides good food and good security. The only problem is that there is no transportation provided by the institute from hostel to the college.
Faculty: Our teachers are industry experts, and they have experience of atleast 10 years. They bring a lot to the table, like introduction of new learning techniques and experiences. My course, tool and die making, provides hands-on experience of what is required in the industry. The exams are not difficult. Simple learning and understanding the subjects results in good grades. My section has a pass percentage of 92%.
Reviewed on 4 Feb 2022Read More
A
Anonymous
Diploma in Tool Engineering and Digital Manufacturing - Batch of 2021
Offered by NTTF - Nettur Technical Training Foundation
1.4
1Placements1Infrastructure3Faculty1Crowd & Campus Life1Value for Money
It is the worst college, and I would not recommend joining it.
Placements: This college has the worst placements. No good companies come to this college, and it's fake that there are 100% placements here. I recommend not to join this college and its waste 3 years of your precious life and the maximum placement offer you get here is Rs. 15,000 per month.
Infrastructure: The hostel is the worst. There's always a bad smell coming from behind the hostel dues that there are many mosquitoes everywhere. You can't even eat your food peacefully here as there are mosquitoes all around. The food served here is average, but it's good only on Fridays.
Faculty: The teachers here are not good. They don't teach much. Only some teachers teach pretty well and the rest all are working for salary only. The exams are not so difficult but some will be difficult as the teachers won't take classes properly, so we won't understand anything that leads to failure in exams. The pass percentage is 35%.
Other: I chose this course because it is a technical one, but the college is the worst. I would not recommend joining here. There are no extracurricular activities nor any events but they simply charge only for that. I would like to say that there only things that should be improved in this college mainly teachers should be replaced. The college should be improved.
Reviewed on 16 Nov 2021Read More
(1) 1 person found this helpfulView All 18 Reviews
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Frequently Asked Questions
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Q: What is the eligibility to get admission in NTTF - Nettur Technical Training Foundation for UG/PG courses?
A:
NTTF - Nettur Technical Training Foundation has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| PG Diploma | Candidate must have completed B.Com/B.A./B.B.M/B.B.S/BTA/BIAS/BHM/BCA/B.E/MBBS degree or equaivalent with mentioned marks from any recognized university. |
| M.E./M.Tech | Students eligible for this program should be B. E. / B. Tech. in Mechanical / Production / Industrial & Production Engineering / Industrial Engineering & Management / Automobile / Mechatronics / Aeronautical Engineering / AMIE / IIIE or equivalent. |
| UG Diploma | Candidate must have completed 10+2 from any recognised Board/Council. |
| After 10th Diploma | Candidate must have passed 10th class from any recognised Board/Council. |
AskShikshaGPT on App
Q: Is NTTF - Nettur Technical Training Foundation a good college/Institute?
A:
NTTF - Nettur Technical Training Foundation is a reputed institute for PG Diploma, Certificate, M.E./M.Tech, UG Diploma, After 1th Diploma. Students can opt these programs to pursue their career in IT & Software, Engineering, Humanities & Social Sciences. Institute has trained & experienced faculty who deliver these programs. NTTF - Nettur Technical Training Foundation has a review rating of 4 on the basis of reviews by students. In addition to this, it has been rated 3.6 on campuslife, 4.1 on placements, 4.2 on faculty and 4.1 on Infrastructure.
AskShikshaGPT on App
Q: What specializations do NTTF - Nettur Technical Training Foundation offer in their courses?
A:
NTTF - Nettur Technical Training Foundation is a good institution for PG Diploma, Certificate, M.E./M.Tech, UG Diploma, After 10th Diploma courses, and these programs are delivered by highly experienced faculty. Major specialisation at NTTF - Nettur Technical Training Foundation are Embedded Systems & VLSI, Information Technology, Mechanical Engineering, J2EE, .NET, English, Industrial Engineering, Electronics & Communication Engineering, Computer Science Engineering.
AskShikshaGPT on App
Q: Which courses are offered at NTTF Bangalore?
A:
NTTF Bangalore Campus offers diploma, certificate, and post Diploma courses to students. The post Diploma course provided by the college is Post Diploma in Tool Design (CP05). The Diploma courses provided by the college are Diploma Program in Tool Engineering & Digital Manufacturing (CP01), Computer Engineering & IT Infrastructure (CP08), and Mechatronics Engineering & Smart Factory (CP15). TThe college also provides a Certificate Programme in Conventional and CNC Machinist - CPPCM.
AskShikshaGPT on App
Q: How is the placement facility at NTTF - Nettur Technical Training Foundation?
A:
NTTF - Nettur Technical Training Foundation has been rated 4.1 on placements on the basis of 79 reviews done by students.
AskShikshaGPT on App
Download exam sample paper
Karnataka SSLC
Karnataka SSLC
ICSE
CBSE 10th
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Placements
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Top Recruiters for NTTF Bangalore CampusAco Technologies
Apollo Tyres
Ashok Leyland
Bajaj Auto
Bosch Ltd
Ford Motors
Godrej and Boyce
Harley Davidson
Intel
ITC
TATA ELXSI
Tata Motors
Tata Steel
TitanIndustries
toyota
Turbo Energy Limilted (TEL)
TVS Group
Wheels India
Whirlpool
Wipro
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Entry Requirements
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Requirements for 10th grade
- N/A
Candidate must have passed 10th from a recognized board.
NFFT Entrance Test
CBSE 10th
ICSE
Karnataka SSLC
Age
Maximum: 24 years
Other eligibility criteria
Candidate who have passed ITI/10+2 can also apply.
For Lateral Entry :- Candidate who have passed 10+2 can take direct admission to 2nd Year
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Admission Process
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Important Dates
ALL
KARNATAKA SSLC
ICSE
CBSE 10TH
Nov 10 - 26, 2025
CBSE 10th-Release of CBSE Class 10 Date Sheet 2026 Phase 1Tentative
Nov 12 - 29, 2025
Release of ICSE Exam Dates 2026Tentative
Feb 17 - Mar 6, 2026
CBSE 10th-Conduct of CBSE Exam Class 10 2026 Phase 1Tentative
Explore Courses offered by NTTF Bangalore Campus
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by NTTF Bangalore Campus
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read After 10th Diploma reviews from NTTF Bangalore Campus
Read ReviewsSimilar courses in the same city
₹12.81 K
Overall Rating5.0
5.0₹12.81 K
Overall Rating3.4
3.4₹12.81 K
Overall Rating– / –
₹12.81 K
Overall Rating4.0
4.0Diploma in Electrical and Instrumentation Engineering
Offered by Electrical and Instrument Training Institute– / –
Overall Rating– / –
₹12.81 K
Overall Rating– / –
₹12.81 K
Overall Rating5.0
5.0₹12.81 K
Overall Rating– / –
₹12.81 K
Overall Rating– / –
₹12.81 K
Overall Rating– / –
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Students also asked
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Q: Is NTTF - Nettur Technical Training Foundation a good college/Institute?
A:
NTTF - Nettur Technical Training Foundation is a well-known institution for PG Diploma, Certificate, M.E./M.Tech, UG Diploma, After 10th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, NTTF - Nettur Technical Training Foundation has a rating of 3.96 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.58 on Campus Life, 4.09 on Placements, 4.19 on Faculty and 4.08 on Infrastructure.
AskShikshaGPT on App
Q: Does NTTF - Nettur Technical Training Foundation has good and experienced faculty?
A:
NTTF - Nettur Technical Training Foundation has been rated 4.2 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.
AskShikshaGPT on App
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in BangaloreNTTF Bangalore CampusCoursesDiploma in Tool Engineering and Digital ManufacturingDiploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Take a look at Campus
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Mechanical Lab
Computer Lab
Lab
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus News & Updates
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Latest
Popular
Diploma in Tool Engineering and Digital Manufacturing at NTTF Bangalore Campus Contact Information
Diploma in Tool Engineering and Digital Manufacturing
at NTTF Bangalore Campus
Address
Nettur Technical Training Foundation Post Box No. 5857, 23/24, 2nd Phase, Peenya Industrial Area
Bangalore ( Karnataka)
Phone
08028371539
(For general query)
08028397218
(For admission query)
Go to College Website ->
Useful Links
Know more about NTTF Bangalore Campus
Know more about Programs
- Engineering
- Tool Engineering
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering