B.Tech Chemical Engineering Colleges in Madhya Pradesh

The admission process for the BTech Chemical Engg. course can easily take around 3 to 5 months to complete because each college abides by its individual guidelines for giving admission that include entrance exams, college application forms, result release, cutoff lists, college counseling, seat allotment, and fee payment.

For merit-based admissions to BTech Chemical Engineering, you may also have to give the GD or PI rounds for final selection. So, it is always good to check the official college websites for their admission guidelines to be on the safer side.

Helpful Link: Chemical Engineering Admission Process

It is not compulsory to give an entrance exam for getting admission to the BTech Chemical Engineering course. There are more than 80 colleges in India that admit students on the basis of Class 12 merit and usually take extra rounds like the PI or GD.

Having said that, it is always better to give the entrance test and score good marks in the same to keep both the options available with you. Top colleges like the IITs and NITs in India strictly consider the entrance test marks for giving admission to the course. Rest, the choice is completely yours.

Know more about -

Chemical Engineering Courses

Almost all of the top colleges offering the BTech Chemical Engineering course release the application forms in the online mode, where you have to fill out all the details correctly, submit the scanned copies of the important documents, and pay the application fee, which is around INR 500 to INR 3,000, based on the college to which you apply. The registration window is open for a limited time period, so make sure you apply before it gets closed to avoid any last-minute hassle.

Know more about -
Chemical Engineering Courses

NIT Manipur JEE Main cutoff 2024 has been released for admission to the BTech courses. During the Round 1 cutoff, the closing rank for CSE was 25886 for the General category students under the AII India Quota. Among OBC candidates, the closing rank for B.Tech. in Computer Science and Engineering stood at 8750. Candidates seeking admisison to NIT Manipur can refer to the table below to check out the Round 1 closing ranks for BTech in CSE course for various categories under the AI quota: 

Category	JEE Main 2024 Expected Cutoff
Common Rank List	90-91
Gen-EWS	75-76
OBC-NCL	73-74
SC	51-52
ST	37-38
PwD	0.0013527

NIT Bhopal JEE Main cutoff 2025 has been released for all rounds and categories under the All India and Home State quota.  The overall closing ranks varied between 1728 and 182471 for the students belonging to the SC AI quota.

For the SC HS quota, the overall cutoff ranged from 2580 to 190611 for all BTech specialisations. Tabulated below is MANIT Bhopal BTech cutoff 2025 for the SC AI category for the first and final rounds.

Course	JEE Main Round 1 Cutoff 2025	JEE Main last Round  Cutoff 2025
B.Tech. in Computer Science and Engineering	1728	57514
B.Tech. in Electronics and Communication Engineering	2642	81459
B.Tech. + M.Tech. in Mathematics and Data Science	2943	98304
B.Tech. in Electrical Engineering	3580	106425
B.Tech. + M.Tech. in Engineering and Computational Mechanics	4581	122266
B.Tech. in Energy and Electrical Vehicle Engineering	4596	133547
B.Tech. in Mechanical Engineering	5044	140930
B.Tech. in Civil Engineering	5476	152419
B.Tech. in Chemical Engineering	5538	131311
B.Tech. in Materials and Metallurgical Engineering	6702	182471

Note: The cutoff ranks will differ for different courses, specialisations, rounds, categories, and quotas.

Lakshmi Narain College of Technology ( LNCT ) Bhopal is one of the best Private Engineering College in Madhya Pradesh. Ranked 66 in the list of Top 100 Engineering Colleges in India. You can rank it as the No. 1 Private Institution in terms of Placements, Academics and Co-curricular activities.

Tier 1 colleges generally have a strong reputation, notable faculty, excellent infrastructure, high placement rates, and significant research output. Tier 2 colleges may have some of these attributes but might not be as prominent or well-established.

Since LNCT is not very advisable for research and other development activities it is a Tier 2 Collage. But placement-wise it is considered one of the best so one can consider it accordingly.

The Bachelor of Technology (B.Tech/BE/B.Sc Engineering) is a degree awarded by universities to students who have completed four years (eight semesters) worth of coursework related to a specific branch of engineering. Most colleges operate on semester basis i.e each year corresponds to two semesters. Eligibility for entry is 10+2 years of school education. Generally the first year (first two semesters) is common to all branches, and has the same subjects of study. Courses divert after first year. The medium of instruction and examination is English and IES is affiliated to RGPV university. IES offers engineering in various branches like: computer science, civil, fire technology, electronics and telecommunication, electrical engineering, chemical engineering. Including all the streams in BTech the number of seats available are around 1700-1800.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

IISER Bhopal cutoff 2025 has been released for different categories of students under the AI quota. For the General category, the cutoff rank for BS + MS admission across multiple specialisations was 2015. For BTech, the Round 1 closing rank stood at 974. To view the category-wise ranks, refer to the table below:

Category	BS + MS	BTech
General	2015	974
OBC	1325	851
SC	555	355
ST	264	115
EWS	465	158
PWD	31547	35747

Courses offerred by Madhav Institute of Technology and Science are approved by eminent Government bodies like AICTE. The combined seats available for courses offered at Madhav Institute of Technology and Science goes up to 1956.

Yes, Class 12 marks is enough for IIST BTech course for admission at Indore Institute of Science and Technology (IIST). However, candidates must have twelve years of education with a minimum 45% percentage  and 40% for the students belonging to the SC/ST/OBC students. Further, candidates must Mathematics, Physics, and Chemistry as their main subjects. 

Vikrant University is a reputed institute for Certificate, B.Tech, M.E./M.Tech, UG Diploma, Others UG, B.A., BSW, B.Sc., BBA, B.Com, BCA, B.Lib.I.Sc., LL.B., B.Des, BFA. Students can opt these programs to pursue their career in Engineering, Beauty & Fitness, Science, Business & Management Studies, Banking, Finance & Insurance, Humanities & Social Sciences, Design, Law, IT & Software, Hospitality & Travel, Accounting & Commerce, Mass Communication & Media, Arts ( Fine / Visual / Performing ), Teaching & Education. Institute has trained & experienced faculty who deliver these programs. Vikrant University has a review rating of 4.2 on the basis of reviews by students. In addition to this, it has been rated 4.3 on campuslife, 4 on placements, 4.4 on faculty and 4.2 on Infrastructure.

UIT RGPV Bhopal accepts JEE Main scores, followed by a counselling process for admission to the BTech courses. As per the UIT RGPV cutoff 2023, the last round closing rank for BTech ranged between 65225 and 309741, among which CSE was the most competitive specialisation. The Round 1 and the Last Round closing rank for BTech in CSE stood at 64215 and 65225, respectively for the General All India category candidates. 

Refer to the table given below to check out the last round closing ranks for all the BTech specialisations offered at UIT RGPV. 

Course	Last Round (Closing Rank)
B.Tech. in Computer Science and Engineering	65225
B.Tech. in Electronics and Communication Engineering	106880
B.Tech. in Automobile Engineering	283137
B.Tech. in Civil Engineering	220497
B.Tech. in Electrical and Electronics Engineering	114391
B.Tech. in Mechanical Engineering	155975
B.Tech. in Information Technology	95369
B.Tech. in Petro Chemical Engineering	309741

 JUET is considered as good when it comes to placement packages. The key information on the Jaypee University of Engineering and Technology placement packages are presented below:

Ujjain Engineering College is a well-known institution for M.E./M.Tech, B.E. / B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Ujjain Engineering College has a rating of 3.57 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.6 on Campus Life, 3.2 on Placements, 3.79 on Faculty and 3.05 on Infrastructure.

Jiwaji University offers a four-year BE programme which is considered equivalent to a BTech. At the time of admission to the BE programme at the university, candidates must present the following documents:

• Copy of counselling registration form
• Printout of score/merit obtained
• Marksheets of Class 10 and Class 12
• Caste Certificate
• Migration certificate
• Transfer certificate
• Aadhaar Card
• Income certificate for reserved category candidates
• MP domicile certificate
• EWS certificate from the competent authority
• PwD certificate from the competent authority
• J & K Migrant
• Affidavit for a gap in studies
• Two recent passport-size photographs

There isn't much information about how many students can do a B.Tech. at Mansarovar Global University, but here's some related information.

Mansarovar Global University (MGU) in Bhopal, Madhya Pradesh, has 287 courses. It has nine B.E./B.Tech. courses.

The university has over 300 programmes with 63 specialisations in 17 streams. At the UG level, the top programmes include B.Tech, BBA, and LLB.

Selection for B.Tech courses is based on marks of 10 + 2 with the PCM stream or equivalent with 50% aggregate marks.

The average fee at MGU is $75,000 per year.

 

In the case of BTech, Institute of Engineering and Science, IPS Academy will need Class 12 with PCM minimum of 45 percent. MTech requirements are a Bachelor degree, and good scores in entrance exam. relaxing of reserved category may be performed.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

ITM Group of Institutions, Gwalior has courses such as B.Tech, M.E./M.Tech which are primarily in the stream of Engineering. ITM Group of Institutions, Gwalior has specializations such as B.Tech specializations in Civil Engineering, Chemical Engineering, Computer Science Engineering, Electronics & Communication Engineering, Mechanical Engineering, Information Technology, M.E./M.Tech specializations in VLSI Design, Computer Science Engineering.