Engineering

There is no such criteria (minimum JEE marks) for admission in to SASTRA university. SASTRA university has a separate procedure through stream 1 and stream 2 .
Stream 1
70 percent seats of every branch are filled through stream 1 based on 12 th percentage ( 75 percent after normalisation ) + JEE mains score ( 25 percent )
For example
12 th percentage - 88 (CBSE) and JEE mains score is 80 .
Normalised percentage of board would be as follows
88 * 100/98.6 = 89.25
(Assuming percentage of topper is 98.6 )
Now 89.25 * 0.75 + 80 * 0.25 =86.94
This is your final score . AIR (SASTRA) is prepared based on this final score . There is a chance AIR up to 4000 .
If someone is a topper of board exam and his JEE mains score is 40 then final score would be 85 and AIR (SASTRA) would be above 5000 . It proves that there is no chance for JEE mains score below 40 in stream 1 .
Stream 2 .
30 percent seats of every branch are filled through stream 2 based on 12 th percentage .
There is very less chance for percentage below 95 in stream 2 .
I know your chances are less but your intermediate marks is good so you still stand a chance to get admission through stream 1.

Cutoff basically depends on the number of persons appearing for a given exam and the number of students who have filled the corresponding institute or college form. More is the number of students who have filled the admission form the cut off will definitely increase. But if the number of students filling the form is less than the cutoff will decline .
So it all depends on the number of students filing the form. Cutoff vary from year to year and at some times you may see that it may go higher while at some times it may decline and lower rank may take admission in the college.
So basically predicting the cutoff before it comes is difficult as it may vary this year but you can always predict the cutoff depending on the last year admissions.
So you can check the last year cutoff . and i will provide you with the 2021 year cutoff and you can check the other year cutoff and can predict the cutoff of this year not surely.

1. As an Erection/Commissioning Engineer: A unit (Trichy, Hardwar, Bhopal, Hyderabad, and others) manufactures heavy equipment, e. g. , boilers, turbines (steam, gas, hydro), ESPs, panels, etc. , and sends it to the respective project site. The mechanical engineer erects this equipment as per the planned layout, commissions it, and makes it run. This is the most challenging work profile with the highest level of responsibility.
2- As a Production Engineer: A Unit has many workshop bays where different products are made. A production engineer is in charge of a basin and ensures the proper and on-time manufacturing of a particular product.
3. As a Quality Engineer: When the product is ready, it is to be thoroughly checked by a Quality Engineer. They perform many tests as per the contract and prepare reports.
4. As a Material Management/Purchase Engineer: Many of the internal components of heavy machinery are purchased directly. A purchasing engineer buys these materials as per technical specifications.
5. As a Marketing or Proposal Engineer: A marketing executive prepares the commercial offer and submits it to the customer, participates in negotiations, and plays a significant role in bringing order. They used to meet customers, give an overall presentation covering the entire product range, and play the role of single-point contact for customers.
6: As an R&D/Design Engineer: A design engineer is considered the product owner. A mechanical engineer designs the product and prepares production drawings. R&D engineers improvise the existing design or innovate new methods, introductions, or materials that can enhance the performance of the product or make it more economical. I hope this will help you.

Bharat Heavy Electrical Limited and Bharat Electronics Limited are both renowned Indian public sector undertakings and being in the field of manufacturing, both provide a work-life balance, so there is not much to think about when deciding which of these to choose. Here are some points that may help you. In terms of salary, Bharat Heavy Electrical Limited provides a slightly higher wage than Bharat Electronics Limited; the starting salary of Bharat Heavy Electrical Limited is INR 20600, which will increase to INR 24900 after one year, whereas the salary of Bharat Electronics Limited is INR 16400. Both Bharat Electronics Limited and Bharat Heavy Electrical Limited have requirements for an electronics engineer, and there is much to do in both public sector undertakings for an electronics engineer, but there is little difference, I. e. , in Bharat Heavy Electrical Limited, work will be on power plant C&I and in Bharat Electronics Limited, work will be on antennas, microwaves, and other defense equipment. Bharat Heavy Electrical Limited is a Maharatna company, while Bharat Electronics Limited is a Navratna company. Bharat Heavy Electrical Limited has offices and manufacturing units almost in every major city across India. The purchase department and the commercial department are departments that do not require any technical knowledge and work similarly in all Indian public sector undertakings. If you were allowed to work in these departments, it does not matter whether you work in Bharat Heavy Electrical Limited or Bharat Electronics Limited. However, Bharat Heavy Electrical Limited provides a total thermal power plant solution. At present, the government is focusing on harnessing power from renewable energy resources, so Bharat Heavy Electrical Limited's business may go down shortly. In the field of product diversification, nothing concrete has been achieved, and I am not much aware of Bharat Electronics Limited's internal problems and its future business scenario. I hope this will help you.

There are many instrumentation colleges in India. A list of the best college is mentioned below;
1- Azad Institute of Engineering and Technology, Lucknow.
2- Dr. Ambedkar Institute of Technology, Bangalore.
3- Indian Institute of Technology, Madras.
4- Indian Institute of Technology, New Delhi.
5- Aryabhatta Knowledge University, Patna.
6- Assam Science and Technology University, Guwahati.
7- Adi Shankara Institute of Engineering and Technology, Kalady.
8- AV Parekh Technical Institute, Rajkot. For more information, you may visit the Shiksha Instrumentation engineering page. (https://www.shiksha.com/engineering/colleges/instrumentation-technology-colleges-india?sby=popularity). I hope this will help you.