B.Tech Civil Engineering Colleges in Karnataka

Candidates should know that salary can be different according to company, location and jobs. AVg. BTech Civil Engineering salary in India can be anywhere between INR 4 LPA and INR 6 LPA.

Also as you gain more experience and learn new skills your salary will increase in the market.

There are a lot of academic institutions in India that provide merit-based admission to the BTech EE course. These colleges mostly conduct additional rounds like the GD or PI round to test the capability of the applicants.

If you have already chosen the Electrical Engineering colleges where you want to study the course, you can simply visit their official websites to check whether they offer merit-based admission or not. Since most of the popular institutes, like the IITs and the NITs, need valid entrance test marks, it is better if you work hard and appear for the entrance exam to have at least one backup option with you.

Some of the key advantages of pursuing Civil Engineering courses after 12th are mentioned below.
Civil Engineers are always in demand because of rapid urbanization and increasing technological advancements which further fuel infrastructural needs.
The construction sector is continuously evolving and never out of demand, hence the need for civil engineers is more with the chances of layoffs being less likely to emerge.
Civil Engineers leave a lasting impact on the society with their involvement in the construction of roads, buildings, airports, etc., where project planning may take up several years and technical expertise.
This field offers people with immense learning opportunities owing to everyday technological innovations and increase in individual demands which requires creativity and an innovative mindset.
Civil engineers hold a valuable and respected position in the society for their contribution towards improvement of communities through structural advancements.

know more about -

Civil Engineering Courses

For last year, the closing rank for BTech in Civil Engineering was 25078 which is very close to this range. This was for the General category under the All India quota. Unless the candidate belongs to some other category or domicile, one cannot afford to score less than this. With this rank, there is a probability of getting admission however since, the cut-offs keep changing year on year, it is advisable to try to score better ranks to increase your chances of getting admission to NIT Surathkal - National Institute of Technology.

Mechanical Engineering and Aerospace Engineering are two different fields of study at the Manipal Institute of Technology. Aerospace Engineering covers aeronautical and astronautical aspects, while Mechanical Engineering is one of the oldest branches of Engineering that deals with machines and devices. MIT is a good college when it comes to placements for Mechanical Engineering students. Approximately 70-80% of students normally get placed with an average salary package. On the other hand, when it comes to Aerospace Engineering, only 50-60% of the students got placed. The fee structure for BTech in both the sub-streams remains the same I. e. , INR 3.35 Lacs for the first year and INR 4.57 Lacs for the remaining years. The Aerospace Engineering programme is a 4-year undergraduate course that requires a minimum eligibility of Class 12 examination with Science subjects such as Biology Maths and Chemistry.

 The department of Aeronautical and Automobile Engineering at MIT was established in 2008 and offers two undergraduate programs and four postgraduate programs. The department has state-of-the-art infrastructure including an autoclave, flight simulator, low subsonic wind tunnel, advanced composites lab, computation lab, gas turbine testing rig, avionics lab, and Trinidad TB 20 aircraft.

In contrast, the Mechanical Engineering programme at MIT is also a 4-year undergraduate course that requires minimum eligibility of Class 12 examination with Science subjects such as Biology Maths and Chemistry. The testimonials of alumni suggest that the recruiting companies are good for Mechanical Engineering graduates like TCS, Wipro, Accenture, Infosys, Ashok Leyland, Cummins, Vedanta, and John Deere among others. It is difficult to compare both the sub-streams because the focus and the curriculum for both of them vary. Therefore, students can select any of the sub-streams depending on their interests and aptitude.

Ramaiah Institute of Technology offers a full-time Bachelor of Engineering (BE) in various streams. To get seat in Ramaiah Institute of Technology BE course, students need to fulfill the minimum eligibility criteria in the first place. The next step is to qualify for the state-level entrance exams, such as KCET/ COMED UGET with a valid score. The selected candidates are given seats based on the respective counselling session.

IIT Dharwad offers great placements to its students. The course wise placement statistics are yet to be released. The overall placement highlights are given in the table below:

No, candidates who want to take admission into Jain University BTech admissions cannot take direct admission into the course. To apply for BTech, candidates need to appear in the common Jain Entrance Test or JET for short. If the candidate is selected, they will be alloted a seat during the counselling rounds.

Candidates seeking admission at RV College of Engineering must meet the required eligibility criteria as preset by the institute. They must appear for the accepted entrance exam. The selection is based on the candidates' performance in the accepted JEE Main or any other national-level/state-level entrance exam. Additionally, shortlisted candidates must present the relevant documents to prove their eligibility.

All the B.Tech. The branches at NMIT, Bangalore, are very closely matched, offering good placement opportunities to all the students. However, direct comparisons between all show that the CSE branch at NMIT, Bangalore, is slightly better than the others in terms of placement statistics and student reviews. Candidates should do their own comparisons to be sure.

BMS College of Engineering is a four-year BE programme for 18 specialisations. The popular ones are Civil Engineering, Mechanical Engineering, Computer Science and Engineering, Biotechnology, Electronics and Telecommunication Engineering etc. The fee and seat intake vary from one specialisation to another. In case any new specialisation is introduced, the same will be mentioned on the BMSCE website. BMS College of Engineering eligibility criteria BE admission is 45% aggregate in Class 12 examination in Physics and Mathematics along with one optional subject.

The total seats offered for B.E. / B.Tech at DSU - Dayananda Sagar University and Siddaganga Institute of Technology are 1140 and 1050, respectively. While DSU - Dayananda Sagar University offers this course in 9 specialisations, Siddaganga Institute of Technology offers the same in 12 specialisations. Hence, there are higher chances of getting a seat at DSU - Dayananda Sagar University due to higher seats.

Both colleges have good placements and educated faculty members. Students can click here to know different views given by students based on various factors, like salary, placements, campus, hostel, etc. 

The application fees for JEE Main is written below

• INR 1,000 for Male unreserved, OBC, EWS category candidates
• INR 800 for Female unreserved/OBC/EWS category candidates
• INR 500 for SC/ST/PwD/Transgender category candidates

The median salary package offered to the students after finishing B.E. / B.Tech from East Point Group of Institutions is INR 510,000. While, the Median package offered by NMAM Institute of Technology after completion of B.E. / B.Tech is INR 450,000. Basis these stats, East Point Group of Institutions is better option compared to NMAM Institute of Technology on the Median salary parameter.

NIE Mysore has released the BE cutoffs for the year 2024. As per the latest available data, the closing rank cutoff for the General-All India based on KCET scores ranged from 12747 to 103761. Moreover, the BE course with the highest competition was Electronics and Communication Engineering. Earlier, in 2023, the cutoff for the same category of students ranged from 9018 to 82211.

Being affiliated to the Visvesvaraya Technological University, DSCE adhere to their respective syllabi. In addition to the prescribed curriculum, students are encouraged to take on project work to gain hands-on experience. Regular interaction with experts from various institutes and research centres expand the frontiers of knowledge of the students. Further, visits are arranged
to various organisations as part of the curriculum. Student seminars and workshops contribute to enhance the effectiveness of learning.

The highest package offered during 2024 placements was bagged by CSE and ISE students. The table below showcases the department-wise salary details for BMS Institute of Technology and Management placements 2024:

Department	the highest Package	Average Package	the lowest Package
AI&ML	INR 18.86 LPA	INR 7.36 LPA	INR 3 LPA
Civil	INR 4.50 LPA	INR 3 LPA	INR 4 LPA
CSE	INR 26 LPA	INR 3 LPA	INR 7.39 LPA
ECE	INR 12.50 LPA	INR 3 LPA	INR 7.07 LPA
EEE	INR 6.80 LPA	INR 3.50 LPA	INR 7.09 LPA
ETE	INR 8.50 LPA	INR 3 LPA	INR 7.09 LPA
ISE	INR 26 LPA	INR 3.50 LPA	INR 7.39 LPA
MBA	INR 7.36 LPA	INR 3.50 LPA	INR 3.82 LPA
MCA	INR 11 LPA	INR 3.50 LPA	INR 5.85 LPA
ME	INR 9 LPA	INR 3 LPA	INR 4.87 LPA

Yes, candidates who are about to appear for Class 12 Board exams can apply for admissions in JSS Science and Technology University BE courses. However, the admission of such candidates will be provisional until they are eligible under the criteria and submit all necessary documents. Candidates who are about to appear for their class 12 board exams are advised to prepare for the KCET and COMEDK exams on the side.

REVA University offers BTech for four-years at the UG level. The university offers BTech in Computer Science, Artificial Intelligence & Data Science, Information Science, Civil, Electronics & Computer Engineering, etc. Candidates must pass Class 12 with relevant subjects with at least 45% aggregate to apply for BTech.