Diploma in Production Engineering (DPE)
at Central Institute of Tool Design, Bala Nagar

3.8 /5

(8 Reviews)

Public/Government Institute
Estd. 1968

Diploma in Production Engineering (DPE)
at
Central Institute of Tool Design
Overview

Central Institute of Tool Design provides UG programmes for the duration of 3 years. The total tuition fee for the Diploma in Production Engineering (DPE) programme is around INR 44,700. The total seat intake for the Diploma in Production Engineering (DPE) course is 60. Students can check Central Institute of Tool Design Diploma in Production Engineering (DPE) details in the table below:

Total Tuition Fees	₹44,700 Get Fees details
Duration	3 years
Course Level	UG Diploma
Mode of Course	Full Time
Official Website	Go to Website
Seat breakup	60
Type of University	Public/Government

Diploma in Production Engineering (DPE)

Table of contents

Overview
Fees
Student Reviews
Entry Requirements
Admission Process

Diploma in Production Engineering (DPE)
at
Central Institute of Tool Design
Fees

The total fee of Central Institute of Tool Design Diploma in Production Engineering (DPE) is a combination of various components. The Central Institute of Tool Design Diploma in Production Engineering (DPE) fee is the combination of tuition fees along-with other fees such as one-time admission fees, exam fees, registration fees, etc. It is to note that the tuition fee is calculated basis the first semester, hence the actual amount may vary as other fee components are added as well.

Fee components	Amount (3 years)
Tuition Fees The mentioned fees is as per TS POLYCET.	₹ 44,700
One-time Payment One-time payment includes : Admission Fee Alumni Fee (only at the time of admission)	₹ 200
Total fee	₹ 44,900

These are based on information available on various sources. Latest values may differ.

Diploma in Production Engineering (DPE)
at
Central Institute of Tool Design
Students Ratings & Reviews

3.8/5

5 Verified Reviews Info Icon

4-5
3
2-3
2

Placements4.6

Infrastructure3.2

Faculty & Course3.8

Campus Life3.6

Value for Money4

Dhanraj Nadivenkeri Verified Icon

Diploma in Production Engineering (DPE) - Batch of 2023

Offered by Central Institute of Tool Design

4.6

5Placements4Infrastructure5Faculty4Crowd & Campus Life5Value for Money

Review of Central Institute of Tool Design.

Placements: Around 50% of students are placed in our course. The top recruiting companies are Tata, Mahindra and Mahindra, and DRDO. The top roles offered in our course are molding and casting works. The college is very good at placements and other sections. It provides tool rooms where the machines are explained.

Infrastructure: It provides good library and tool rooms to know a brief about the machines and other work tools. The hostels are good and the food provided by the canteen is also good. It does not provide many sports and games in this college. The canteen has fresh food and good seating capacity.

Faculty: Faculty members are good and experienced. They teach students excellently. This makes the students work anywhere in the industry. The pass percentage in this college is above 50%. Students have to work hard in this college to get better placements.

Other: I opted for this course because students can have a future in this course. The other courses may end up for some time but this is the everlasting course which is helpful for every sector.

Reviewed on 6 Nov 2021Read More

Venkata Naga sai Verified Icon

Diploma in Production Engineering (DPE) - Batch of 2021

Offered by Central Institute of Tool Design

4Placements2Infrastructure3Faculty3Crowd & Campus Life3Value for Money

Satisfied about college and faculty.

Placements: 1. In our college placements were quiet good and the least package offered by the companies are 1.5 LPA and maximum students are placed in companies and many of them are continuing their job and remaining are going for higher studies like B.Tech.

Infrastructure: 1. In our the labs like electronic lab and Tool room and hydraulic lab and MAT lab and robotics lab and cad and Cam lab were there and the quality of food facilities are quiet good in canteen and medical facilities are also good but no sports are there.

Faculty: The teachers in our college were helpful and very experienced about their subjects and the teaching quality is very good and they are also knowledgeable and the studies will make the students for their job ready and more focused on practicals in each subject.

Other: Scholarship was 5000 for mtf and remaining they will give as a cheque.

Reviewed on 10 Mar 2020Read More

Siddarth reddy Gangidi Verified Icon

Diploma in Production Engineering (DPE) - Batch of 2020

Offered by Central Institute of Tool Design

4.6

5Placements4Infrastructure5Faculty4Crowd & Campus Life5Value for Money

The course and college makes us ready for the industry.

Placements: 100% of students were placed in my college. The highest salary is 30,000, lowest is 8,000 and average 10,000. Top recruiting companies are Godrej, Tata, Apirock etc. 100 % of students got internship from my course and in Godrej, tata, Apirock etc. in my college.

Infrastructure: 1)The facilities and infrastructure available for my college is Wi-Fi, labs, workshops, library, digital classrooms. 2)The quality of the facilities in my hostel is very good, the quality of food available in the mess and canteen, medical facilities, sports, games, workshops, library is very good.

Faculty: 1)The teachers were helpful, qualified, and knowledgeable. The teaching was very good. 2) The course curriculum is relevant making us industry ready and helps us to become entrepreneurs getting more knowledge from faculty. My college provides good practical knowledge also.

Other: 1)l like tool design so I choose this course and the best things about my course is that it provides us with more knowledge and practical skills and experience. 2) The things I wish should be improved about my course is more experienced faculty.

Reviewed on 9 Mar 2020Read More

(1)

1 person found this helpful

Aakash Vidyarthi Verified Icon

Diploma in Production Engineering (DPE) - Batch of 2021

Offered by Central Institute of Tool Design

2.8

4Placements2Infrastructure2Faculty3Crowd & Campus Life3Value for Money

I am satisfied with our college in some aspect, but not satisfied in some aspects.

Placements: I am from tool design course, but that tool design name was not available. Full name of the course is the diploma in tool die and mould making. The course is good, but it's very difficult to complete. Most of our classmates got placed. Still, some more companies are yet to visit here.

Infrastructure: The hostel is provided with canteen and mess. Most of the rooms in the hostel are good. One of the hostels is very old, but students are habituated to stay in that hostel rooms. Some hostel will be very clean, but some are worse. However, they will try to put them clean.

Faculty: Teachers here are good, but sometimes, we can't understand the way they explain because of language and pronunciation. However, they have a good knowledge of the subjects. Sometimes the paper evaluation is worse as they won't even check and are very recklessness on duty. Especially, the examination cell is worse as they do work according to their wish.

Other: I chose this course because it has 100% placements, and it is a very rare course. I thought to do some different and rare courses instead of doing routine courses. Practicals, workshop and CNC machine, are the best, and at least we can learn that perfectly. Our college conducts some extracurricular activities and cultural events. It has some groups like NCC and NSS. Our college doesn't organise events or cultural activities, so we will get bored.

Reviewed on 7 Feb 2020Read More

Akshay Srivastav Verified Icon

Diploma in Production Engineering (DPE) - Batch of 2020

Offered by Central Institute of Tool Design

4.2

5Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money

We get good subject and practical knowledge required for job in big companies

Placements: I will be honest and up to the point. In our college, there will definitely be placements. If you are merit or poor in studies, you have to gain practical knowledge to work in a company. You will get placements in big companies like Tata, Wipro, Godrej, etc. or if not, there will be other good companies to recruit you. You will get Rs.7000 to 15000 as a starting salary. The average can be estimated as Rs.9000. With the help of this knowledge, you will be able to go abroad afterwards. Till now, many students have got good jobs in India as well as abroad.

Infrastructure: In our college, there is a workshop in which we have different types of machines like lathe, grinding, milling and many others. The infrastructure of the college is decent. Labs and the library are high-tech and good. Classrooms are big and good. Food is low cost and very good with a delicious menu every day. Till now, there have been no issues related to the infrastructure. We have very high-tech machines on our campus and computers. Learning is done through projectors. Sorry, but there will be no sports on the campus. A hostel is there but it will be only available for 1st-year students. The hostel is very good for students. Also, there is a garden on the campus for students to study and relax.

Faculty: I am having a good experience with the faculty members. They are very helpful, qualified and they are having high knowledge of the subject. They teach by practical, oral and by visual method via projectors. There are many teachers for different courses. We will get industry exposure after completion of the course. This curriculum is useful for knowledge and good job. In the end of course, there will be company selection for jobs through interviews.

Other: For joining this college, we have to attend an exam made by the college for students. In which we have to get a good rank then only we can get the seat. Otherwise, you will not get it. After joining every semester, your attendance should be over 75 percent or else, you will be detained.

Reviewed on 15 Dec 2017Read More

(5)

5 people found this helpful

View All 8 Reviews