Post Graduate Diploma in Tool, Die and Mould Design
4.2 /5- Public/Government Institute
- Estd. 1968
Post Graduate Diploma in Tool, Die and Mould Design at Central Institute of Tool Design Overview
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
Central Institute of Tool Design provides Post Graduate Diploma in Tool, Die and Mould Design at the PG level. This is a 18 months course with the total tuition fee of INR 76,500. The total fee has several components such as admission fee, application fee and tuition fee. Students can check more details on Post Graduate Diploma in Tool, Die and Mould Design offered at Central Institute of Tool Design in the table provided below:
Total Tuition Fees | ₹76,500 Get Fees details |
Duration | 18 months |
Course Level | PG Diploma |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 60 |
Type of University | Public/Government |
Post Graduate Diploma in Tool, Die and Mould Design
Table of content
Post Graduate Diploma in Tool, Die and Mould Design at Central Institute of Tool Design Fees
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
Central Institute of Tool Design Post Graduate Diploma in Tool, Die and Mould Design fee is collective of various components, such as the tuition fees, one-time charge, hostel fees, registration fees, examination fees, and other basis. However, there may be additional fees that students might be required to pay that are particular to the institution. At Central Institute of Tool Design, the total tuition fee for Post Graduate Diploma in Tool, Die and Mould Design is INR 76,500. Here is the information about the Central Institute of Tool Design Post Graduate Diploma in Tool, Die and Mould Design fee breakup:
| Fee components | Amount (18 months) |
|---|---|
₹ 76,500 | |
₹ 76,500 |
These are based on information available on various sources. Latest values may differ.Post Graduate Diploma in Tool, Die and Mould Design at Central Institute of Tool Design Students Ratings & Reviews
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
4.2/5
2 Verified Reviews- 4-52
Placements5
Infrastructure4
Faculty & Course3.5
Campus Life4
Value for Money4.5S
Surya teja
Post Graduate Diploma in Tool, Die and Mould Design - Batch of 2023
Offered by Central Institute of Tool Design
4.2
5Placements4Infrastructure3Faculty4Crowd & Campus Life5Value for Money
Review of Central Institute of Tool Design.
Placements: In our college, the placements are excellent. The placements are offered to every student in other states or in the college only.
Infrastructure: The infrastructure of our college is very nice. The food served in the canteen is good, which is available at affordable prices for day scholars and also for hostellers. The food is not very good but worth eating. Every machine is available in our college, which makes it easy to understand things very quickly and even makes it very easy to get placements.
Faculty: Faculty members here are very nice who are very experienced. They teach us very easily, and we can understand easily. But there is the main problem with exams, and they provide us the information about exams before 1 week or even before two or three days where we don't have any time to study for exams. The courses offered are also nice here.
Other: We can get a scholarship for our course.
Reviewed on 14 Oct 2021Read More
RS
Rithesh singh
Post Graduate Diploma in Tool, Die and Mould Design - Batch of 2018
Offered by Central Institute of Tool Design
4.2
5Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Overall, satisfied with the college.
Placements: CITD is providing good opportunities to every candidate. So, many good companies like Bajaj, Mercedes, Taal Tech, Cyient, Mekins, Siemens, Kia Motors etc. have been attended for the campus drive, but the thing is, the candidate must have skills to get the job. Package offered by various companies starts from Rs. 12,000 per month to Rs. 30,000 per month. So, I hope if anyone wants job, he/she must have good knowledge. To acquire that, they can join in this college.
Infrastructure: It has a well, and good infrastructure with lab facilities, which is open from 8 am to 9 pm. All the systems in the lab are in good working condition. There are enough systems for the students, on which they can practice in the college hours for 12 hours, also without any interruption. There is a good green environment. We have canteen food at very affordable cost.
Faculty: Faculty members are very active and efficient. They have minimum ten years of experience in teaching. They teach the students not only theoretically but also practically. They are regular to the classes. Some will take us to the tool room for practical understanding.
Reviewed on 1 Feb 2018Read More
(3) 3 people found this helpfulKS
Kuda Subramanyam
Post Graduate Diploma in Tool, Die and Mould Design - Batch of 2018
Offered by Central Institute of Tool Design
4.2
4Placements4Infrastructure4Faculty5Crowd & Campus Life4Value for Money
100% placement record with good internship opportunities
Placements: 100 percent placement. The minimum percentage of students placed is 65% and above. Companies like Tata Motors, Godrej have tie-ups with the college. The students also got an internship from the college. Diploma students are also placed.
Infrastructure: Good classrooms with smart classes and advanced technology. CNC machines are also there. Well maintained workshop. AC is provided at the CNC machine centres. The lab is provided for every course. Hostel facility is available. The canteen food was good.
Faculty: Highly skilled faculty is provided by the college. They have a good understanding with the students. We get both theoretical and practical knowledge. We are also taken to JNTU Hyderabad for practicals.
Other: Events are not there in the college. Campus surrounding is good with a lot of greenery. Fees relaxation for SC/ST students.
Reviewed on 1 Mar 2018Read More
View All 3 Reviews
Post Graduate Diploma in Tool, Die and Mould Design at Central Institute of Tool Design Entry Requirements
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
Graduation
- N/A
- Mandatory Courses : B.E. / B.Tech(Mechanical Engineering), B.E. / B.Tech(Production Engineering), B.E. / B.Tech(Mechatronics Engineering), B.E. / B.Tech(Automobile Engineering), B.E. / B.Tech(Aeronautical Engineering)
Post Graduate Diploma in Tool, Die and Mould Design at Central Institute of Tool Design Admission Process
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
- Register and ApplyInterested candidates can apply offline by downloading the application form from institute website or by obtaining the application form and prospectus from the Training Department of the institute. The hardcopy of the downloaded application form, duly filled-in, shall be sent to the college with required in formation.
- Merit ScreeningAdmission is based on the score obtained in entrance exam conducted by Central Institute of Tool Design(CITD).
Explore Courses offered by Central Institute of Tool Design
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Tool Design
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read PG Diploma reviews from Central Institute of Tool Design
Read ReviewsCompare Courses From Similar Colleges
₹89 K
Overall Rating– / –
₹15.4 K
Overall Rating– / –
₹18 K
Overall Rating– / –
₹3.5 K
Overall Rating– / –
– / –
Overall Rating– / –
– / –
Overall Rating– / –
– / –
Overall Rating4.6
4.6– / –
Overall Rating– / –
– / –
Overall Rating– / –
– / –
Overall Rating– / –
Similar courses in the same city
Post Graduate Diploma in Plastic Mould Design
Offered by Central Institute of Plastics Engineering and Technology, Hyderabad– / –
Overall Rating– / –
Post Graduate Diploma in Geoinformatics
Offered by Centre for Development of Advanced Computing, Kukatpally₹89 K
Overall Rating– / –
₹35 K
Overall Rating– / –
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in HyderabadCentral Institute of Tool DesignCoursesPost Graduate Diploma in Tool, Die and Mould DesignPost Graduate Diploma in Tool, Die and Mould Design at Central Institute of Tool Design News & Updates
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
Latest
Popular
Post Graduate Diploma in Tool, Die and Mould Design at Central Institute of Tool Design Contact Information
Post Graduate Diploma in Tool, Die and Mould Design
at Central Institute of Tool Design
Address
Bala Nagar Chaurastha, Narsapur X Road, Hyderabad, Telangana
Hyderabad ( Telangana)
Phone
04027496178
(For general query)
04023772748
(For admission query)
Email
citdplacements@citdindia.org
(For general query)
citdmarketing2@gmail.com
(For admission query)
Go to College Website ->
Useful Links
Know more about Central Institute of Tool Design
- All About Central Institute of Tool Design
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Tool Design Faculty
- Compare Central Institute of Tool Design
- Central Institute of Tool Design Q&A
Know more about Programs
- Engineering
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering
- BTech Mechatronics Engineering