

Discontinued (August 2025) M.Tech. in Computer Integrated Manufacturing
- A+ NAAC accredited
- Private Institute
- Estd. 2002
Discontinued (August 2025) M.Tech. in Computer Integrated Manufacturing at FISAT Overview
FISAT College offers a 2 years M.Tech. in Computer Integrated Manufacturing course at the PG level. The course has a seat intake capacity of 9 students. Students can check other courses under FISAT College M.E./M.Tech.
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website |
Seat breakup | 9 |
Type of University | Private |
Discontinued (August 2025) M.Tech. in Computer Integrated Manufacturing at FISAT Fees
The fee for FISAT College M.Tech. in Computer Integrated Manufacturing is currently not available. The same information will be available here once released by the institution.
Discontinued (August 2025) M.Tech. in Computer Integrated Manufacturing at FISAT Frequently Asked Questions
The college has not released the placement rarte recorded for the class 2023. However, as per unoffcial sources, the hiring rate recorded for CSE students was 80% during the placement drive 2023. The same has been mentioned in the table below:
| Particulars | Statistics (2023) |
|---|---|
| CSE Placement rate | 80% |
Note: The placement rate mentioned in the table above are gathered from unofficial sources.
FISAT offers PhD, undergraduate, and postgraduate courses to students. These courses are provided across the Engineering, Management, and various other streams. At the undergraduate level, the college offers BTech courses to students. At the postgraduate level, the college offers MTech courses to students. M.Tech is provided in various specialisations such as Power Electronics and Power Systems, Artificial Intelligence and Data Science, Renewable Energy, VLSI & Embedded Systems, and Structural Engineering & Construction Management.
If someone misses the internal exams in the Federal Institute of Science & Technology, then either you will have to pay by theory only by scoring high marks.
Or he can re-give the exams.
For more information log on to the FISAT official website.
Fisat is one of the best self financing engineering college in Kerala. It is a private engineering college and business school located in Mookkannoor, Kerala, India. The college is run by the Federal Bank Officers' Association Educational Society and was established in 2002. FISAT is approved by AICTE, New Delhi, and affiliated with KTU, Thiruvananthapuram. It is accredited by NAAC with 'A+' Grade & NBA (CSE, ECE, EEE, EIE & ME).
Explore Courses offered by FISAT
Other courses offered by FISAT
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech. in Computer Science and Engineering
Offered by Adi Shankara Institute of Engineering and TechnologyM.Tech. in Structural Engineering and Construction Management
Offered by Indira Gandhi Institute of Engineering & Technology, KothamangalamM.Tech. in Computer Science and Engineering (Cyber Security)
Offered by Muthoot Institute of Technology and ScienceM.Tech. in Computer Science Engineering
Offered by VJCET - Viswajyothi College of Engineering and TechnologyM.Tech. in Structural Engineering and Construction Management
Offered by Cochin Institute of Science and TechnologyM.Tech. in Industrial Instrumentation and Control
Offered by MGM College of Engineering And Technology, ErnakulamDiscontinued (August 2025) M.Tech. in Computer Integrated Manufacturing at FISAT Students also asked
FISAT College has collaborated with various companies and organisations. The college has signed MoUs with various industries and companies. The below-mentioned are Federal Institute of Science and Technology collaborations:
| FISAT Collaborations | ||
|---|---|---|
| University of Malaysia Al-Sultan Abdullah, Pahang, Malaysia | Furniture & Fittings Skill Council (FFSC) | L&T EDUTECH |
Builders Association of India (BAI) | Kerala State Remote Sensing and Environmental Centre (KSREC) | - |
These are the B.Tech programme seat intakes, which are based on data from the Federal Institute of Science and Technology website:
The total intake for Computer Science and Engineering (CSE) is 120 seats.
The total intake for Electronics and Communication Engineering (ECE) is sixty seats.
The total intake for Electrical and Electronics Engineering (EEE) is sixty seats.
Total Intake for Civil Engineering: 60 seats
The total intake for mechanical engineering is 120 seats.
Data Science and artificial intelligence: total enrollment of 60 seats
In addition, 30 seats are available for lateral entry admission to B.Tech programs in the second year.
Yes, entrance-based admissions are the main criteria for B.Tech programs, as passing JEE Main or comparable national/state exams is required. Merit and admissions chances are determined by rank on these tests.
Prior to being admitted, students must take and pass national engineering admission exams such as JEE Main. The institute determines the qualifying cut-off scores. Therefore, passing the eligibility test for admission is crucial.
After that, admissions are determined by the entrance exam results' All India ranking. Only the students' JEE Main merit rankings are used to fill seats.
In addition to admission ranking, the 12th standard percentage may also be taken into consideration for seats under reserved quota or at the institute level. However, the determining factor for the majority of seats is entrance exam merit.
Adi Shankara Institute of Engineering and Technology (ASIET) and Federal Institute of Science and Technology (FIST) are contrasted side by side:
Certifications: The NBA has recognised FIST's engineering programs for meeting high standards of quality. Only ASIET is ISO certified.
Placements: Every year, more than 250 reputable firms come to FIST to look for students, and over 80% of them are placed. Less than 100 recruiters work with ASIET, which has a 60% placement rate.
Faculty: With a concentration on research cooperation with institutions such as IISc, about 45% of the faculty at FIST are PhD candidates. Less PhDs are at ASIET.
Infrastructure: FIST boasts a 50-acre campus with state-of-the-art labs, dormitories, and recreational spaces like gyms and swimming pools. The infrastructure of ASIET is adequate.
Exposure: Compared to ASIET, FIST arranges more conferences and events and actively supports student publications.
In terms of factors like total placement, average wage, number of recruiting organizations, and the largest package, Federal Institute of Science and Technology does appear to offer greater placement prospects. Another benefit is the increased industry representation across all sectors.
Placement percentage: More than 80% of students from all branches have been placed at FIST. ASIET has a placement rate of roughly 60%.
Recruiters: More than 250 reputable organizations, such as Microsoft and Infosys, are hosted by FIST for placements. Less than 100 companies are attending ASIET.
the highest package: Microsoft's 43 LPA package is the highest package available at FIST. The ASIET's the highest package is limited to 20 LPA.
Average package: For FIST, the average placement package is between 6-7 LPA, however for ASIET, it is between 3-4 LPA.
Sector-wise placements: FIST offers core engineering positions in the manufacturing, energy, and construction sectors with businesses like BHEL, L&T, etc., while both have placements in IT and software.
Student Forum
Content authored by:
Discontinued (August 2025) M.Tech. in Computer Integrated Manufacturing at FISAT News & Updates



Discontinued (August 2025) M.Tech. in Computer Integrated Manufacturing at FISAT Contact Information
Hormis Nagar, Mookkannoor P O, Angamaly, Ernakulam Dt.
Kerala
Ernakulum ( Kerala)
(For general query)
(For admission query)
Useful Links
Know more about FISAT
Know more about Programs
- Engineering
- Computer Science Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering

