M.Tech. in Civil Engineering
- Private Institute
- Estd. 2001
M.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences Overview
Gokul Institute of Technology and Sciences offers a 2 years M.Tech. in Civil Engineering at PG level. To secure a seat in this course, aspirants must fulfil the entry requirements. The fee for the courses offered at Gokul Institute of Technology and Sciences is inclusive of different components, such as tuition fees, caution money, etc. Gokul Institute of Technology and Sciences M.Tech. in Civil Engineering tuition fee amounts to INR 1,44,000. Aspirants can check other Gokul Institute of Technology and Sciences M.E./M.Tech courses as well. The following table can be referred to for the course details:
Total Tuition Fees | ₹1.44 Lakh Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 252 |
Type of University | Private |
M.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences Fees
Gokul Institute of Technology and Sciences M.Tech. in Civil Engineering fee is collective of various components, such as the tuition fees, one-time charge, hostel fees, registration fees, examination fees, and other basis. However, there may be additional fees that students might be required to pay that are particular to the institution. At Gokul Institute of Technology and Sciences, the total tuition fee for M.Tech. in Civil Engineering is INR 1,44,000. Here is the information about the Gokul Institute of Technology and Sciences M.Tech. in Civil Engineering fee breakup:
| Fee components | Amount (2 years) |
|---|---|
₹ 1.44 Lakh | |
₹ 1.44 Lakh |
These are based on information available on various sources. Latest values may differ.M.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences Frequently Asked Questions
Listed below are the the top Medical courses with lucrative salary prospects.
Course | Average Salary | Career Path |
|---|---|---|
MBBS | INR 10-30 LPA | Doctor, Surgeon, Specialist |
BDS | INR 6-20 LPA | Dentist, Oral Surgeon |
BPharm/MPharm | INR 5-15 LPA | Pharmacist, Drug Researcher |
MPT | INR 6-12 LPA | Physiotherapist, Sports Rehab Expert |
MSc Clinical Research | INR 8-20 LPA | Clinical Researcher, Medical Scientist |
MD/MS | INR 15-50 LPA | Specialist Doctor, Surgeon |
| Courses | Eligibility |
|---|---|
| B.E. / B.Tech | Candidates who have passed Diploma in Engineering or any other examination recognized as equivalent there to, from a recognized Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit. |
| MBA/PGDM | Candidate must have completed bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission. |
| B.Pharma | Candidates should have completed 16 years of age by the date of commencement of admission or on such other date as may be notified by the CET committee. There is no upper age limit. |
| UG Diploma | Candidates should have passed S.S.C. Examination and obtained atleast 35% marks in the qualifying examination conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognized as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, Telangana Open School Society (TOSS), A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/TOSS/APOSS/CBSE/ICSE/Other Examinations recognized as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates can apply on provisional basis. Candidate should belong to the State of Andhra Pradesh. |
| M.E./M.Tech | Candidate must have passed B.E./B.Tech. in relevant stream and obtained with the above mentioned marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis. |
Download exam sample paper
M.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences Entry Requirements
- 50%
- Read more
Candidate must have passed B.E./B.Tech. in relevant stream and obtained with the mentioned marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
M.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences Admission Process
Important Dates
Explore Courses offered by Gokul Institute of Technology and Sciences
Other courses offered by Gokul Institute of Technology and Sciences
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
4.44.9M.Tech. in Power Electronics and Power Systems
Offered by Prasiddha College Of Engineering TechnologyM.Tech. in Computer Science Engineering
Offered by Siddharth Institute of Engineering and Technology (SIETK)M.Tech. in Computer Science and Engineering
Offered by Bhimavaram Institute of Engineering and TechnologyM.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences Students also asked
VLSI design tools are software applications that are used to design, verify, and fabricate integrated circuits (ICs). These tools are essential for VLSI designers, as they allow them to create complex ICs with millions or even billions of transistors. Some of the most popular VLSI design tools are:
- Cadence Design Systems (CDS)- CDS is a suite of VLSI design tools that covers the entire IC design flow, from RTL design to physical design.
- Synopsys: Synopsys offers a wide range of VLSI design tools, includingRTL synthesis, physical design, and verification tools.
- Zuken: Zuken offers a variety of VLSI design tools, including PCB design, schematic capture, and physical design tools.
VLSI design tools are constantly evolving, and new tools are being developed all the time. As the complexity of ICs continues to increase, VLSI design tools will become even more essential for VLSI designers.
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in Andhra Pradesh - OtherGokul Institute of Technology and SciencesCoursesM.Tech. in Civil EngineeringM.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences News & Updates
M.Tech. in Civil Engineering at Gokul Institute of Technology and Sciences Contact Information
Useful Links
Know more about Gokul Institute of Technology and Sciences
- All About Gokul Institute of Technology and Sciences
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Gokul Institute of Technology and Sciences Faculty
- Compare Gokul Institute of Technology and Sciences
- Gokul Institute of Technology and Sciences Q&A
Know more about Programs
- Engineering
- VLSI Design
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering