

Diploma in Civil Engineering
- Private Institute
- Estd. 1996
Diploma in Civil Engineering at SSGI Overview
Sri Sai Group of Institutes, Badhani Diploma in Civil Engineering is a 3 years course offered at the UG level. The total tuition fee for Diploma in Civil Engineering at Sri Sai Group of Institutes, Badhani is INR 99,000. The seat intake for this course is 300. Check more details below for Sri Sai Group of Institutes, Badhani UG Diploma course:
Total Tuition Fees | ₹99,000 Get Fees details |
Duration | 3 years |
Course Level | UG Diploma |
Mode of Course | Full Time |
Official Website | Go to Website |
Seat breakup | 300 |
Type of University | Private |
Diploma in Civil Engineering at SSGI Fees
Sri Sai Group of Institutes, Badhani Diploma in Civil Engineering fee consists of components, such as tuition fee, one-time fee, registration fee, exam fee, etc. The total tuition fee for Diploma in Civil Engineering at Sri Sai Group of Institutes, Badhani is INR 99,000. Candidates can have a look at the table below to get an understanding of the fee structure of Sri Sai Group of Institutes, Badhani and familiarise themselves with the additional cost while studying at the institute:
| Fee components | Amount (3 years) |
|---|---|
₹ 99,000 | |
₹ 99,000 |
Diploma in Civil Engineering at SSGI Frequently Asked Questions
| Courses | Eligibility |
|---|---|
| B.Sc. | Candidate must have passed class 10+2 from recognized board. |
| Certificate | Candidate must have passed class 10+2 with mentioned marks from recognized board. |
| B.Com | Candidate must have passed class 10+2 from recognized board. |
| B.Ed | Candidates with at least 50% Marks either in Bachelor's degree and/or in the Master's degree in Science/ Social Sciences/ Humanities/ Commerce/Home Science/ B.B.A/ B.C.A, or any other qualification equivalent thereto, are eligible for admission to the programme. There shall be a relaxation of 5% marks in favour of SC/BC candidates. Bachelors in Engineering or Technology with specialization in science and mathematics with 55% marks or any other qualification equivalent thereto, are eligible for admission to the programme. However, while calculating merit, marks obtained in Graduation only will be considered. There shall be a relaxation of 5% marks in favour of SC/BC candidates. Candidate with less than 50% marks belonging to these categories shall not be eligible. Candidates should have passed Graduation/Post-Graduation in a relevant school subject. |
| B.E. / B.Tech | Candidate must have passed Diploma in relevant stream from a recognized Institute. |
| BBA | Candidates must have passed the 10+2 or its equivalent examination in any stream conducted by a recognized Board/ University/ Council. OR Candidates who have passed their Matriculation examination and have also passed three year Diploma in any Trade from Punjab State Board of Technical Education & Industrial Training, Chandigarh or such Examination from any other recognized State Board of Technical Education, or Sant Longowal Institute of Engineering & Technology, Longowal are also eligible. |
| BCA | Candidates must have passed the 10+2 or its equivalent examination in any stream conducted by a recognized Board / University / Council. OR Those candidates who have passed their Matriculation examination and have also passed three year Diploma in any Trade from Punjab State Board of Technical Education & Industrial Training, Chandigarh or such Examination from any other recognized State Board of Technical Education, or Sant Longowal Institute of Engineering & Technology, Longowal are also eligible. |
| M.Pharma | Candidates who have passed B.Pharma are eligible to apply. In case seats haven't been filled under respective categories, admission shall be considered on the basis of Inter-se-merit in the qualifying examination. |
| M.Sc. | Candidate must have passed graduation from recognized university. |
| M.E./M.Tech | Candidates must have passed B.E./ B.Tech. in relevant stream with atleast 50% (45% in case of candidate belonging to reserved category) marks in aggregate. In case seats haven't been filled under respective categories, admission shall be considered on the basis of Inter-se-merit in the qualifying examination. A valid GATE Score would be preferred but not mandatory for admission. |
| B.Arch | Candidate who have passed 10+3 Diploma Examination with Mathematics as compulsory subject with at least 50% marks in aggregate from a recognized Institute/ University can also apply. Candidates appearing for 10+3 Diploma with Mathematics in the current year may also provisionally appear for NATA-2023. |
| MBA/PGDM | Candidates must have passed Bachelors Degree of minimum three year duration in any disciplineand must have obtained above mentioned marks (45% marks in case of candidates belonging to reserve category) from the University recognized by the University Grants Commission (UGC). In case seats haven't been filled under respective categories, admission shall be considered on the basis of Inter-se-merit in the qualifying examination. |
| MCA | Candidates must have passed BCA/Bachelor Degree in Computer Science Engineering or equivalent Degree. OR Candidates must have passed B.Sc./ B.Com./ B.A. with Mathematics at 10+2 level or at Graduated Level (with additional bridge courses as per the norms of the concerned University) Candidate must have obtained at least 50% (45% in case of candidate belonging to reserved category) in the qualifying Examination. |
Diploma in Civil Engineering at SSGI Students also asked
Structural Engineers design, plan and supervise the construction projects, eg - buildings, parks, malls, bridges and more. They also take care of alterations to existing properties or structures. A Site Engineer takes responsibility for security, safety, health, organising and supervising material and people at sites.
The BTech Civil Engineering course includes a lot of interesting subjects for students to study. Some of them are
- Advanced Mathematics
- Solid and Fluid Mechanics
- Concrete Technology
- Soil Surveying
- Geotechnical Engineering
- Environmental Engineering
- Strength of Materials
- Concrete Structures and Structural Analysis
- Water Resources Engineering
Diploma in Civil Engineering at SSGI Entry Requirements
Diploma in Civil Engineering at SSGI Admission Process
- Entrance TestEligible candidates need to appear for the Joint Entrance Test (JET) conducted by the Punjab State Board of Technical Education.
- CounsellingAdmission is through counselling based on the rank obtained in Joint Entrance Test (JET) conducted by the Punjab State Board of Technical Education.
Explore Courses offered by SSGI
Other courses offered by SSGI
- – / –
- – / –
- – / –
- – / –
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Student Forum
Content authored by:
Diploma in Civil Engineering at SSGI News & Updates




Diploma in Civil Engineering at SSGI Contact Information
Dalhosuie Road, Badhani
Pathankot ( Punjab)
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about SSGI
Know more about Programs
- Engineering
- Civil Engineering
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering
